Application of SiC-Si functionally gradient material to thermoelectric energy conversion device

Because of its high–temperature chemical stability, SiC ceramic is a promising material for high-temperature device applications such as thermoelectric energy converters. However, the electrical conductivity of SiC ceramic is too low for it to be used as a thermoelectric energy converter at the cold junction. Therefore, we propose a SiC-Si functionally gradient material (FGM) in order to improve the electrical conductivity of the SiC ceramic at the cold junction. An SiC rod was fired in a temperature gradient furnace. One end of the SiC rod was maintained at 2473 K and the other end was maintained at 1973 K for 30 min. After firing, the porous SiC edge fired at 1973 K was dipped into molten Si in order to infiltrate molten Si into the porous SiC. The microstructure of the FGM is classified into three regions: the SiC-Si composite material; the porous SiC ceramic; and the densified SiC ceramic. The electrical conductivity, the Seebeck coefficient and the thermal conductivity for each region of SiC-Si FGM was measured at 300 K; a figure of merit was calculated. The figure of merit of the SiC-Si FGM at the cold junction, at room temperature, was 10⁸ times higher than that of a nongradient SiC ceramic.     

氯碱生产中的腐蚀与防护

介绍了氯碱装置中介质的腐蚀特性、常用材料的耐腐蚀特性及应用实例。     

Flammability characteristics at applied heat flux levels up to 200 kW/m2

This paper documents the first of the two interrelated studies that were conducted to more fundamentally understand the scalability of flame heat flux, the motivation being that it has been reported that flame heat flux back to the burning surface in bench‐scale experiments is not the same as for large‐scale fires. The key aspect was the use of real scale applied heat flux up to 200kW/m² which is well beyond that typically considered in contemporary testing. The main conclusions are that decomposition kinetics needs to be included in the study of ignition and the energy balance for steady burning is too simplistic to represent the physics occurring. An unexpected non‐linear trend is observed in the typical plotting methods currently used in fire protection engineering for ignition and mass loss flux data for several materials tested and this non‐linearity is a true material response. Using measured temperature profiles in the condensed phase shows that viewing ignition as an inert material process is inaccurate at predicting the surface temperature at higher heat fluxes. The steady burning temperature profiles appear to be invariant with applied heat flux. This possible inaccuracy was investigated by obtaining the heat of gasification via the ‘typical technique’ using the mass loss flux data and comparing it to the commonly considered ‘fundamental’ value obtained from differential scanning calorimetry measurements. This comparison suggests that the ‘typical technique’ energy balance is too simplified to represent the physics occurring for any range of applied heat flux. Observed bubbling and melting phenomena provide a possible direction of study. Copyright © 2007 John Wiley & Sons, Ltd.     

带肋钢筋套筒挤压连接的质量控制

针对太原可口可乐综合厂房主筋采用φ28、φ32三级钢存在的可焊性差的问题，提出了在施工中采用套筒挤压连接的方式，并对该方法的操作要点及质量控制措施进行了总结。     

Effect of 3D lip deformations on elastohydrodynamic lip seals behaviour

The numerical simulation of comparative elastohydrodynamic lubrication between axisymmetrical and 3D elastic approaches on the radial lip seals is presented in order to determine the 3D effect of the elastic aspect of the seal lip. Indeed, the consideration of 3D model in other words the circumferential variation of the lip elastic deformation indicated a difference in the deformation distribution of the lip compared to the axisymmetrical approach. Consequently, the results show that the presence of the circumferential variation of the seal lip deformation has a significant effect on the pumping rate values.     

Thin conducting polypyrrole film on insulating surface and its applications

An electrically conductive plastic material was obtained by the polymerization of pyrrole on insulating polymeric materials and nylon cloth impregnated with the oxidant by vapour phase technique, resulting in a uniform, smooth and adherent coating of conducting polymer having a surface resistance ranging from 200 Ω/□ to 20 kΩ/□, which makes it suitable for applications as an antistatic material.     

自粘聚合物改性沥青防水卷材胶粘剂

在SBS改性沥青防水卷材表面涂敷一层自粘性胶粘剂并以隔离纸覆盖，使用时撕掉隔离纸直接粘贴于屋面即可粘接密封牢，不但施工方便而且消除了熔融法施工造成的污染。该胶粘剂由沥青40％～65％，SBS 5％～30％，增粘剂2％～25％和助剂5％～25％构成。胶层具有可塑性、延展性，可自行填补屋面出现的裂缝，保证防水卷材的防水密封效果。     

凹凸棒粘土用作高水速凝注浆悬浮剂

以凹凸棒粘土作为高水速凝固化充填材料的悬浮稳定剂，考察了不同制浆机械对凹凸棒粘土制浆率的影响。采用高剪切混合乳化机预制的1％凹凸棒粘土浆配制高水速凝固化充填材料甲、已料单浆可获得满意的悬浮稳定效果。其充填体结石抗压强度早期发展迅速，后期持续增长。采用此工艺，注浆料的材料成本仅增加2％。     

下河沉积型瓷石的工艺特性与开发应用的探讨

本文论述了新近在江西下河发现的沉积型瓷石的地质特点、矿石特征、精泥性能、成瓷工艺及其开发应用前景。     

对甲醇精馏几个问题的认识

简述甲醇精馏三塔流程原理 ,分析了加压精馏塔及常压精馏塔物料和热量平衡关系 ,提出了操作中应注意的事项