溶胶—凝胶法制备有机改性硅酸盐的研究进展

综述了有机改性硅酸盐的溶胶－凝胶合成路线，并简要介绍它们的结构、性能及应用     

低压长袋脉冲袋式除尘器设计与应用

以工业原料尤里卡沥青(EP)为对象，详细论述了低压长袋脉冲袋式除尘器的主要设计环节，着重分析了新型脉冲阀技术。指出了该技术在化肥行业原料干燥、风扫制备等方面的推广应用和发展趋势。     

MRT letter: Human bloodstains on antique aboriginal weapons: a guiding low-vacuum SEM study of erythrocytes in experimental samples on ethnographically documented biological raw materials

The aboriginal use of reed and bone as raw materials for knives and daggers, respectively, has been well-documented ethnographically in some geographical areas of Melanesia. Because of the significant role that these weapons played in inter- and intra-ethnic aggression, they can potentially have retained smears from the contact with human blood. To carry out a guiding low-vacuum scanning electron microscopy (SEM) study of specific interest to ethnography, the outsides of a fragment of stalk of giant cane (Arundo donax) and tibial diaphysis of domestic sheep (Ovis aries) were smeared with peripheral human blood. No biological specimen preparation was applied to the samples. After just over 1 month, bloodstain boundaries and their neighboring inner areas were examined via secondary electrons by a variable-pressure SEM (VP-SEM) working in low-vacuum mode. On both substrates, bloodstains exhibited micro-scales. No janocyte (erythrocyte negative replica) was observed in the examined areas. However, erythrocytes were seen crowded together as grain-shaped corpuscles in the smear on reed, and several hecatocytes (moon-like shaped erythrocytes) were evidenced in the smear on bone. The results of this study suggest that a VP-SEM working in low-vacuum mode can be used fruitfully to detect blood remains in medium-sized reed and bone antique aboriginal artifacts. This procedure can prospectively help to ethnographic museum curators and aboriginal-art surveyors as an easy guiding test in the valuation of antique traditional weapons prior to acquisition, when the real use of a piece has been claimed by the supplier.     

光存储材料CaS∶Eu,Sm的正交实验制备及表征

CaS∶Eu,Sm材料在光存储、光探测领域具有广阔应用前景,但制备过程中影响其发光性能的因素较多,彼此又有交互作用,不易获得最佳工艺参数。本文采用高温固相反应法,通过正交实验设计系统研究了灼烧温度、灼烧时间、稀土掺杂浓度、助溶剂用量对CaS：Eu,Sm发光性能影响的主次关系,经正交分析和验证实验确定了最佳工艺参数应为：Eu∶Sm∶Ca mol%=0.3∶0.3∶99.4%,1100℃灼烧0.5h,助熔剂LiF用量为7%。采用X射线粉末衍射仪、荧光分光光度计（耦合1064nm激光激励源）对样品的物相及发光性能进行了测试与表征。     

A combined dislocation—cohesive zone model for fracture in a confined ductile layer

The collective dislocation behavior near a crack tip in a ductile layer sandwiched between two brittle solids is analyzed via two-dimensional dislocation dynamics (DD) simulations that incorporate a cohesive zone (CZ) model. The cohesive crack tip is treated as part of a much larger finite crack confined in the ductile layer. The underlying boundary value problem is formulated with a set of boundary integral equations and numerically evaluated with a collocation method. The fracture energy of the layered composite material is shown to be strongly correlated with the layer thickness and is directly influenced by the cohesive strength of the ductile layer (Hsia KJ et al. (1994) J Mech Phys Solids 6 877–896).     

Base Pressure Measurements under a Scale Model Stockpile

The ability of a granular bulk material to transmit internal shear stress is a fundamental property that is often overlooked or underestimated, yet it is this ability that allows many observed physical phenomena to occur. One such area that continues to be a focus for numerical, theoreticals and experimental researchers is the pressure that a stockpile of granular material places on the supporting surface. While appearing to be a simple problem, the ability of granular materials to transmit shear stress makes this an extremely complex problem. This article presents high-quality data collected under a 2 m high stockpile and full details of the experimental facilities used in the collection of the data.

The work presented is of significant value, having a much greater scale than previous studies (Jotaki & Moriyama, 1979; Lee & Herington, 1971; Smid & Novosad, 1981), and the deliberate inclusion of a central reclaim channel offers insight into stress changes during gravity reclaim and refilling. The results of this work have shown that the so-called 'M' pressure does exist under larger stockpiles both with and without reclaim hoppers; of more significance is the reemergence of the M pressure upon refilling of an emptied stockpile. This clearly illustrates that the M pressure is a robust and natural pressure distribution for a conical stockpile.     

关于商品包装物开发利用途径的研究与探讨

针对商品包装物消耗大量原材料、能源及物化劳动和活劳动的现状,为实施持续发展战略,为人类生存留有空间、为子孙后代造福,就商品包装物所用材料的开发与利用途径问题提出了行之有效的措施,为商品包装物的开发利用展示了新的途径.