305酯在船用PVC电缆料中应用研究

用305酯（双季戊四醇酯）增塑剂与其他添加剂配合使用，部分取代TOTM（偏苯三酸三辛酯）生产船用105℃PVC（聚氯乙烯）电线电缆料，并对其电性能，浸水后电性能等进行测试分析。结果表明，305酯为主增塑剂剂时，与4～5份的TCP（磷酸三甲酚酯）并用可以显著改善电缆料浸水电性能。在配方中应用二盐基性苯二甲酸铅和二盐基硬脂酸铅作稳定系统，更能保证电线电缆料浸水电性能的稳定。     

GRM-2SD120棉线缠绕机

介绍了GRM－2SD120棉线缠绕机的结构原理，重点介绍了该机的锭子部分，口型部分，锭子盘，中胶部分，传动原理，电气原理及主要技术参数。     

电凝聚方法处理聚氯乙烯工业废水试验

对电凝聚方法处理聚氯乙烯工业废水的效果及影响因素进行了分析研究。现场运 行结果表明,该方法试验装置对聚氯乙烯废水的处理效果较好,出水水质达到综合排放 标准,对COD,BOD和TSS的去除率分别达到95％,91％和90％;对废水流量负荷的变化 具有较好的适应性,保证出水水质稳定;装置的运行成本经济实用。     

Resistivity and thermal reproducibility of carbon black and metallic powder filled silicone rubber heaters

Flexible heaters were prepared by extruding platinum‐catalyzed silicone rubber composites with conductive carbon black (CB) and metallic fillers. The conductor resistivity of the extruded heaters decreased in order of conductive titanium dioxide (TiO₂) > aluminum powder ≈ zinc powder > copper powder. Thermoelectric switching phenomena were investigated for the silicone rubber/CB/metallic powder systems. The positive temperature coefficient effect was dependent mainly on the CB content rather than on the content of the metallic powders. Resistivity and thermal reproducibility of the extruded heaters were also investigated by periodically applying AC voltage of 110 V. The heaters containing copper and TiO₂ powders exhibited excellent electrical reproducibility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1122–1128, 2005     

dc Electrical Degradation of Perovskite-Type Titanates: I, Ceramics

The rate of the resistance degradation of doped SrTiO₃ ceramics is investigated as a function of various external and material parameters. The effects of the mutually interrelated parameters dc voltage, dc electric field, and thickness of the dielectric are described by power laws. Electron microscopic potential contrast studies show a Maxwell-Wagner polarization leading to a concentration of the electric field at the grain boundaries during the degradation. Based on this finding, the voltage step per grain boundary, ΔΘ_gb, is introduced as a rate-determining parameter which allows an explanation of the influence of the grain size on the degradation rate as well as the difference in the power laws for ceramic and single-crystal samples.     

CAN总线与以太网互联网关的设计

电梯远程监控系统的关键在于电梯CAN总线与以太网的互联,基于此背景提出一种高性能低成本的解决方案。首先,给出系统总体结构和硬件设计,然后详细阐述软件设计,完成基于μC/OS-II操作系统的嵌入式uIP协议栈的移植开发,并提供软件系统的具体优化方法。最终实现以LPC2368为微处理器和DP83848C以太网控制芯片为核心的CAN总线与以太网互联网关,为工业现场总线与以太网的互联提供了一种可行的解决方案。     

电磁波干扰屏蔽塑料

屏蔽塑料是一种功能性高分子新型材料。用此种塑料制成的电子机器、仪器壳体,能有效地防止电磁波干扰造成的各种事故。国外公司推出的不同品种的屏蔽塑料,可供我国塑料的开发应用参考。     

Interaction of Aluminum with Detonation Products

A method of electrical conductivity and an analysis of recovered explosion products are used to study interaction of aluminum with detonation products of condensed high explosives. The electrical conductivity of HMX/Al and RDX/Al mixtures is inhomogeneous; a region with the maximum electrical conductivity is adjacent to the detonation front, whereas the electrical conductivity decreases with distance from the front. If the wave is incident onto a wall, the electrical resistance of the composite high explosive increases, which indicates that the high-conducting zone disappears. The electrical conductivity, resistance of the conducting zone, and the time of resistance growth are found as functions of the particle size of the additive. The results obtained confirm the reaction of the metal additive with detonation products in a microsecond range of time. An analysis of condensed explosion products shows that the reaction of aluminum with detonation products proceeds on the particle surface. The amount of reacted aluminum and the oxide-layer thickness are estimated. __________ Translated from Fizika Goreniya i Vzryva, Vol. 42, No. 1, pp. 120–129, Jnuary–February, 2006.     

硅橡胶在电气绝缘方面的应用进展

简述了国内外硅橡胶(高温硫化型硅橡胶、室温硫化型硅橡胶、液体硅橡胶等)在电气绝缘方面的应用情况。     

Bulk and Surface Properties of a VPO Catalyst Used in an Electrochemical Membrane Reactor: Conductivity-, XRD-, TPO- and XPS-study

In the first part of this work, the electrical conductivity of vanadium phosphorous oxide (VPO) catalyst was investigated by means of the 2-probe EIS method. The VPO showed an extremely low conductivity at low oxygen partial pressure, which is the prevailing condition in the anodic compartment in an electrochemical membrane reactor (EMR). In the second part of this study, fresh as well as VPO catalyst already used in an EMR were characterised with XRD, XPS and temperature programmed oxidation (TPO). The XRD measurements revealed an unchanged bulk phase structure after operation in the EMR. Significant differences in the average oxidation states of vanadium in the catalyst layer in the EMR were determined via XPS, where the catalyst surface facing the electrolyte membrane was more oxidised than the surface facing the anodic gas compartment. The lowered uptake and release of oxygen was observed in TPO experiments for the catalyst used in the EMR.