无限维的不可微凸规划

本文在局部凸Ｈａｕｓｄｏｒｆｆ线性拓扑空间中讨论了一类不可微的凸规划，得到了Ｋｕｈｎ－Ｔｕｃｋｅｒ最优性条件和对偶定理。     

应用铟源的反应蒸发制备In2O3透明导电膜

本工作说明，在低压氧气氛中。应用铟源的反应蒸发很容易淀积高质量的Ｉｎ２Ｏ３透明导电膜．旦然没有使用锡杂质，但所得膜的性能可以和最好的掺锡的Ｉｎ２Ｏ３膜相比．膜电阻率达２～３×１０￣４Ω·ｃｍ，可见光透过率超过９０％，并且膜生长速率高达２１９／ｍｉｎ．文章对成膜过程作了分析，报道了膜的最佳淀积条件，对由于偏离最佳淀积参数而导致的异常膜的形成机制也进行了讨论．     

铝在醚类电解质中的电沉积

本文综合了近期有机试剂中电沉积铝的有关文献，主要介绍了铝在ＡｌＣｌ３与乙醚、四氢呋喃（ＴＨＦ）、１－甲基－３乙基咪唑氯化物（ＭＥＩＣ）、Ｎ－（ｎ－丁基）吡啶氯化物（ＢＰＣ）等满替代的翁盐等组成的电解质中，电沉积的电极过程，以及在ＭＥＩＣ和ＢＰＣ中得到的铝层组织和结构的研究成果，并举例了沉积铝层的应用。     

双抽机组工况图的画法分析

双抽机组热-电负荷关系非常复杂，运行人员难于分配。介绍一种较精确的工况图画法，可以为电厂运行人员提供可靠的基础。     

ε－拟可微规划的Fritz John型条件和Knhn－Tucker型条件

讨论了不等式约束下的ε－拟可微规划的局部最优解问题，给出了这一问题的ＦｒｉｔｚＪｏｈｎ型条件和Ｋｕｈｎ－Ｔｕｃｋｅｒ型条件，本文也是对Ｇｏｒｏｋｈｏｖｉｋ结果的推广     

简述近期我国硬质合金工业发展趋势

介绍了2005年我国硬质合金行业基本情况,分析了近期行业发展趋势。     

CAL delivery selection criteria and authoring systems

Abstract  In the past, authoring systems have been used to generate computer-assisted learning materials that have often followed the rather restrictive programmed learning format. A number of innovative ways of using recently developed systems to develop CAL packages that include a wider range of learning activities (access to data bases, simulations, interactive video, etc.) are described. Analogous to the concept of a media selection model, a computer delivery mode selection model is presented as an aid to decision making for designers. This increase in flexibility should broaden the applicability of computerassisted learning (CAL) to a wider range of educational objectives and raise the level of the cognitive emphasis in learning packages, as well as facilitate the implementation of visually appealing materials. The paper also implies a standard of acceptability for authoring systems.     

Enhanced Oil Recovery: The Synthesis of Anthraquinone [1, 2-C] Alkylisoxazole

Anthraquinone [1, 2-C] methylisoxazole is synthesized from 2-ethylanthraquinone through nitration and treating with oleum. The different methods of 2-ethylanthraquinone nitrated were discussed. The optimum conditions were determined. The structure of the product was confirmed by MS and ¹H NMR.     

Influence of thermal boundary conditions on natural convection in a square enclosure partially heated from below

Natural convection in air-filled 2D square enclosure heated with a constant source from below and cooled from above is studied numerically for a variety of thermal boundary conditions at the top and sidewalls. Simulations are performed for two kinds of lengths of the heated source, i.e., a small and a large source corresponding to 20% and 80% of the total length of the bottom wall, respectively. The Rayleigh number varied from 10³ to 10⁷. Results are presented in the form of streamline and isotherm plots as well as the variation of the Nusselt number and maximum temperature at the heat source surface. Comparisons among the different thermal configurations considered are reported.     

机械合金化Fe─B非晶合金及纳米合金的形成

在适当条件下机械合金化可以形成急冷法难以得到的单一Ｆｅ６０Ｂ４０非晶合金，而在其他成分内形成亚稳纳米合金。在众多的球磨条件中，球磨机的转速是控制合金化的重要因素，空气中的氧对小颗粒界面产生了强烈的污染作用，从而抑制了原子的相互扩散，难以形成单一的非晶产物。不同球磨条件下的产物含有的非晶相的晶化温度比单一非晶相合金的晶化温度稍高，并且与球磨条件以及成分的关系不大。