电解法测定钢中Al2O3夹杂的不确定度评定

对电解提取-化学分析法测定钢中Al2O3的不确定度产生的原因作了较为细致的分析,并对Al2O3夹杂测定结果的不确定度做出评定.     

钽、铌电解电容器工艺研究进展(续)

结合对钽、铌电解电容器性能特点的介绍，综述了近年来国内外钽、铌电解电容器研究、生产方面的进展以及市场动态。     

在充氢条件下ZL107的力学性能

对铝硅合金ZL107试样进行了电解充氢试验，因出现偶然因素，其力学性能不仅不降低．反而上升了．初步研究后得知，这与试样充氢后在液氮中保持及随后在空气中暴露的时间有关．     

用于稀土电解的小盒卡具应用技术研究

对大型稀土电解槽用阳极卡具进行分析研究,介绍了小盒卡具的安装方法及工作过程,再与传统楔形卡具进行了对比分析,得出小盒卡具在使用过程中不发热、不变形、不松脱,具有紧固压力大、导电性好等优点,为改善阳极压接方式收到了良好的效果.     

Electrochemical Study on the Reduction Mechanism of Uranium Oxide in a LiCl-Li2O Molten Salt

By means of a linear sweep voltammetry, a cyclic voltammetry and a chronopotentiometry, the electrolytic reduction of uranium oxide has been studied to establish the reduction mechanisms, which are based on a simultaneous uranium oxide reduction and a Li₂O electrowinning, and the formation and electrolysis of lithium uranate. From the voltammograms, the reduction potentials of the uranium oxide and Li₂O were obtained. From the chronopotentiometries based on the results of the voltammograms, the uranium oxide was reduced to uranium metal through the reduction mechanisms showing a more than 99% conversion. For a verification of the reduction mechanisms feasibility, basic data on the electrolytic reduction of the uranium oxide was obtained from the experiments and the characteristics of the closed recycle of Li₂O were discussed.     

Accelerated Discovery of Potent Bioactive anti-TNFα Aptamers by Microbead-Assisted Capillary Electrophoresis (MACE)-SELEX

Dysregulation of tumor necrosis factor-α (TNFα), a pro-inflammatory cytokine, causes several diseases, making it an important therapeutic target. Here, we identified a novel DNA aptamer against human TNFα using in vitro selection, which included a high exclusion pressure process against non-binding and weak binders through microbead-assisted capillary electrophoresis (MACE) in only three rounds. Among the 15 most enriched aptamers, Apt14 exhibited the highest inhibitory activity for the interaction between TNFα and its cognate receptor in mouse L929 cells. For further improving the bioactivity of the aptamer, dimerization programed by hybridization was evaluated, resulting in the Apt14 dimer exhibited a twofold higher binding affinity and stronger inhibition compared to the monomer counterpart. Rapid identification of bioactive aptamers using MACE in combination with facile dimerization by hybridization accelerates the discovery of novel bioactive aptamers, paving the way toward replacing current monoclonal antibody therapy with the less expensive and non-immunogenic aptamer therapy.     

Removal of Ruthenium from PUREX Process, (II) Fundamental Research of Electrolytic Oxidation of Ruthenium

A new method was developed for the removal of ruthenium from nitric acid solutions. Ruthenium in 3 M nitric acid solution is oxidized electrolytically to ruthenium tetraoxide, and the tetraoxide is extracted into n-paraffin. The ruthenium tetraoxide extracted in paraffin is readily reduced to ruthenium dioxide by the solvent as black suspension, and it can be easily filtered off through an ordinary cellulose fiber filter. By this method, ruthenium, one of the most troublesome fission elements in PUREX Process, can be removed.     

2D sodium titanate nanosheet encapsulated Ag2O-TiO2 p-n heterojunction photocatalyst: Improving photocatalytic activity by the enhanced adsorption capacity

In a photocatalytic reaction, maintaining the high efficiency of photocatalyst under a low concentration of pollutants is a key challenge. In this work, a new 2D sodium titanate nanosheet encapsulated Ag₂O-TiO₂ (2D NTO/Ag₂O-TiO₂) p-n heterojunction photocatalyst is proposed to deal with this dilemma. Through a simple plasma electrolytic oxidation (PEO) treatment and ion exchange treatment, a classic Ag₂O-TiO₂ p-n heterojunction structure is prepared and used as the photoelectric conversion unit in the photocatalyst. Then, through a subsequent hydrothermal treatment, a 2D NTO film that serves as the adsorption unit in the photocatalyst can be produced on the surface of the Ag₂O-TiO₂ p-n heterojunction layer. Finally, the desired 2D NTO/Ag₂O-TiO₂ structure is formed. The photocatalyst exhibits superior photocatalytic performance including high degradation rate as well as excellent catalytic stability and durability by combining the high sunlight utilization efficiency and high photoelectric utilization efficiency of the Ag₂O-TiO₂ p-n heterojunction and the outstanding adsorption performance of the 2D NTO film. Therefore, the problem of photocatalytic slow kinetics under low pollutants concentration is perfectly solved. This work provides a new strategy for the structural design of high-performance photocatalysts.     

High-temperature corrosion characteristics of yttria-stabilized zirconia material in molten salts of LiCl-Li2O and LiCl-Li2O-Li

The isothermal and cyclic corrosion behavior of yttria (Y₂O₃)-stabilized zirconia (ZrO₂) in a LiCl-Li₂O molten salt were investigated at 650 °C in an argon atmosphere. During isothermal and cyclic corrosion tests in the molten salt of LiCl-Li₂O for 168 h and 7 thermal cycles, the corrosion rate was very low, whereas under the molten salt of LiCl-Li₂O-Li for 168 h, the corrosion rate was almost 10 times higher than that in the molten salt of LiCl-Li₂O. No corrosion product was detected until 168 h for the isothermal corrosion test, however, after 7 thermal cycles, a very-low-intensity Li₂ZrO₃ peak was detected at the beginning stage of the chemical reaction between ZrO₂ and Li₂O. Additionally, in the molten salt of LiCl-Li₂O-Li for 168 h, a large amount of Li₂ZrO₃ was formed, with evidence of marked cracks, pores, and spallations on the corroded surface. The introduction of Y₂O₃-stabilized ZrO₂ was beneficial in increasing the hot corrosion resistance of the structural materials used to handle molten salts containing Li₂O at elevated temperature without forming a lithium at the cathode during the electrolytic reduction process.     

Effect of tunnel structure on the specific capacitance of etched aluminum foil

The morphology of etched aluminum foil was observed using scanning electron microscopy, which led to the establishment of a cylindrical model and two merged models, considering the fixed weight loss of etching. The maximum of specific capacitance and the cor- responding optimum values for tunnel sizes at various anodization voltages were predicted. The increased size distribution and taper of tun- nels were demonstrated to decrease the specific capacitance, whereas the addition of polymeric additive into the ttmnel widening solution was demonstrated to increase the capacitance. The formation of merged tunnels on the etched aluminum surface, irrespective of the presence of row-merged tunnels or cluster-merged tunnels, resulted in a dramatic decrease in the specific capacitance. It is concluded that, enhancing the uniformity of turmel size and distribution and avoiding the formation of merged tunnels are the effective approach to achieving the higher capacitance for the tunnel etched and formed aluminum foil.