稳定锌新液含锌降低电锌成本

本文从计算出发，分析要满足适宜的电解液含锌、含酸，就要控制好新液含锌，就能减少系统体积周转量，有效利用新液，降低电锌成本。     

宽温长寿命铝电解电容器

对宽温低中高压长寿命铝电解电容器，要达到各种电压类别的高低温特性和叠加纹波电流的高温负荷特性要求，必须分别研制相应的工作电解液。并对衬垫纸、零部件（铝梗、橡胶塞等）加以注意。     

铝电解电容器用电解纸

从铝电解电容器用电解纸的材料组成和制造方式入手，全面分析了各种电解纸的性能，给出铝电解电容器电解纸的选用方法。     

锡盐铝电解着色液再生处理的实践

本文对明胶与铝电解着色液溶胶的作用机理进行了分析，提出了用明胶对浑浊锡电解着色液进行再生处理的方法和工艺。     

Manufacture of some SIMS components from tantalum foils by electrolytic photoetching

Components of a specimen holder used in secondary ion mass spectrometry (SIMS) have been fabricated from tantalum by electrolytic photoetching. Principal benefits of the technique are the ability to use a non-hazardous etchant and the ease with which design modifications can be carried out     

Evolution, dissolution and reversible generation of gold and silver nanoclusters in micelle by UV-activation

Gold and silver nanoparticles were produced separately by UV photoactivation (with variable flux density) in the presence of nonionic micelle, TX-100. Even their cyano complexes break down in TX-100 under UV and hence dissolution and reevolution of almost monodispersed nanoparticles (∼ 3 nm) are possible.     

电凝聚法处理废水的效能和作用的研究

本文从理论和试验结果阐述了废水电凝聚处理的效能和作用机制。测试了铁电极的极化曲线,提出了电流效率和阳极溶铁量的关系,研究了亚铁离子在处理水和泥渣中的分配比例以及pH对电凝聚效果的影响,最后对电凝聚和化学凝聚的效果进行了对比.     

Some aspects of electrochemical engineering

After a short discussion of the concept of electrochemical engineering, the immediate history of electrochemical process engineering (EPE) is briefly mentioned. Topics then considered are electrolytic reactor design, process modelling and optimisation, and the development and scale-up of electroorganic processes. The article concludes with an assessment of the present state of EPE.     

铝电解电容器生产过程中电容量衰减现象的研究和控制

电容量衰减现象在铝电解电容器生产过程中普遍存在,只是原因各不相同。电容量衰减易造成产品电容量分布不均匀、电容量合格率低,严重时会造成产品接触不良,导致无电容量,产品失效率上升,给铝电解电容器产品的质量稳定性带来很大的影响。通过分析形成电容量衰减的各种原因,找到相应解决的措施,使铝电解电容器生产过程中质量稳定,原材料用量减少,成本下降,增强产品的市场竞争能力。     

铝电解电容器用铆接模的研究

用于铝电解电容器导针与极片刺铆的铆接模性能对产品质量有直接影响。推出一种较为理想的铆接模结构。通过对刺铆针直径、四棱锥角度及棱面粗糙度、凹模孔直径以及铆压压力等关键参数进行合理设计，并正确选用模具材料及热处理方式，使铝电解电容器导针与极片刺铆的质量大为提高。