A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

电话通信设备电磁干扰的测量分析

本文探讨了ＴＥＭ室测量电话通信设备辐射干扰的原理、方法，得出了在线电话终端０．１５～３０ＭＨｚ频段辐射干扰测量结果，并进行了分析。     

再论变化电磁场中带电超微粒子的精确量子论

利用创新的SU(1 ,1 )Lie代数理论及SO(3)Lie代数理论 ,得到变化电磁场中带电超微粒子的精确量子论 ,由此进一步明确微观领域中的时空概念     

多频电磁波测井数据的反演成像技术及应用

针对测井数据反演成像问题的不适应定性，采用了带不等式约束的正则化最小二乘迭代反演，模型响应的正演计算用有限元方法实现，模型响应对电阻率及介电常数的偏导数用格林函数和互换原理计算，对高低频电磁波测井数据的反演分两步进行，首先用低频数据得到电阻率的大致分布，再以此为初值，用高频电磁波数据同时反演电阻率和介电常数，通过对模型的数值模拟和某地热田1口井的实际资料的应用表明，电磁波测井数据的反演厉像能给出井周近旁介质的电性参数分布，而在离井较远的区域不能得到稳定可靠的解释结果，无论高频还是低频测井数据，要得到高质量的成像结果，工作频率的适当选择及接收器灵敏度的提高是至关重要的。     

斜井提升钢丝绳磨损“失效树”分析

介绍了引起斜井提升钢丝绳失效的各种因素 ,并建立“失效树” ,为煤矿生产中判断其失效原因及预防提供可靠依据。     

分布式供电和冷热电联产的前景

文中通过分布式供电特点及其发展趋势的阐述,强调了该供电特点是集中供电的重要补充,并且指出可再生能源将为分布式供电提供更为广阔的发展前景。同时,还认为分布式供电技术的主要发展方向为“冷热电三联产”技术。     

微波场中光纤探头温升的研究

当把光纤温度传感器置于微波场中测温时，由于受电磁场的作用，传感头内部将有能量损耗，以致发生测温偏差。本文将传感头简化成有限长圆柱，计算出在微波场中传感头的能量损耗和温度变化。最后还分析了一种实际热色效应光纤温度传感器。     

2#1880高炉炉顶料流调节阀系统改造实践

介绍了对2#1880m^3炉顶料流调节阀控制系统的改造方案及调试方法，使用结果表明改造后料流调节阀工作正常，故障率低，满足生产要求。     

A simplified cascade current‐source inverter interconnected to a single‐phase three‐wire distribution system and its application to electric energy storage systems with batteries

A novel current source inverter system interconnected to the single‐phase grid is proposed. It has the same construction as the conventional three‐phase current source inverter that is interconnected to the single‐phase three‐wire distribution system. Though the proposed circuit has no output transformer, it can be equivalently performed as the single‐phase double cascade inverter by diverting the pole transformer in the utility system. By controlling the appropriate scheme, the output currents can be obtained as the five‐level waveforms and their distortions can be decreased sufficiently. It is applied to the interactive electric energy storage system with batteries and the basic discharging characteristics are discussed experimentally. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10380     

连续化,高速化,自动化是提高线材制品在国内外市场竞争力的根本出路

对线材制品从连续化、自动化、高速化等方面与国外企业生产状况进行了分析比较,提出了实现生产过程的连续化、高速化、自动化是发展我国线材制品的必由之路的观点。