Coating of SiC Powder with Nano YAG Phase

SiCceramiccompositeshavefoundextensiveap plicationsinmodernindustryduetotheirexcellentchemicalstabilityandwear resistance .Rodeghieroetal.[1～ 3 ] investigatedthefabricationofSiC Al2 O3 ce ramiccompositematerialsviaco precipitationcoatingandsol gelmethods…     

Evaluating Acceleration Ability of Electrons of SiO_2 and ZnS in ZnS∶Er Electroluminescence

SinceCoeyandSun[1]discoveredtheinterstitial compoundSm2Fe17Nx,ithasattractedmanyresearch ers′attention.Asakindofpermanentmagneticmate rial,Sm2Fe17Nxexhibitsfairlyhighsaturationmagneti zation(1.54T)[2],highanisotropyfield(14T)under roomtemperatureandhighC…     

Free Vibration Analysis of Laminated Stiffened Shells

The free vibration of the laminated composite anticlastic doubly curved stiffened shells is investigated using the finite element method. The stiffened shell element is obtained by appropriate combination of the nine-node doubly curved isoparametric thin shallow shell element with the three-node curved isoparametric beam element. The shell forms include the hyperbolic paraboloid, hypar, and conoidal shells. The accuracy of the formulation is validated by comparing the authors’ results of specific problems with those available in the literature. The additional problems are taken up for parametric studies to include the effects of fiber orientation and lamina stacking sequence of shells and stiffeners. Moreover, the effects of number, types, and orientations of stiffeners, and stiffener depth to shell thickness ratio on the fundamental frequency are also included in the present study. Further, mode shapes corresponding to the fundamental frequency for typical cases are obtained to verify the parametric trend of the results of the fundamental frequency.     

Evaluation of Two Homogenization Techniques for Modeling the Elastic Behavior of Granular Materials

This paper discusses the capabilities of two homogenization techniques to accurately represent the elastic behavior of granular materials considered as assemblies of randomly distributed particles. The stress-strain relationship for the assembly is determined by integrating the behavior of the interparticle contacts in all orientations, using two different homogenization methods, namely the kinematic method and the static method. The numerical predictions obtained by these two homogenization techniques are compared to results obtained during experimental studies on different granular materials. Relations between elastic constants of the assembly, interparticle properties, and fabric parameters are discussed, as well as the capabilities of the models to take into account inherent and stress-induced anisotropy for different stress conditions.     

Dynamic Spar Elements and Discrete Element Methods in Two Dimensions for the Modeling of Soil-Inclusion Problems

Discrete element methods (DEMs) provide new numerical means to study the behavior of soil-inclusion systems. In some cases, however, the classic DEM fails to model specific aspects of the inclusions. That is why a model based on spar elements is introduced, designed specifically for inclusions. In this model, the movement of the inclusion is considered as a dynamic process and is computed step by step in the same way as in the DEM. The model can be coupled with a DEM code, thus enabling one to simulate the interaction between an inclusion and a disk assembly. Contact laws at the contacts between disks and spar elements describe the interface constitutive behavior. Finally, the results obtained by simulating a geosynthetic anchorage in two different ways are reported. In the first case the inclusion is represented by disks, while in the last case it is represented by spar elements. The comparison shows that spar elements are much more versatile and can simplify the calibration of the discrete models used to simulate soil-inclusion systems.     

Rational Approach to Shear Design in Fiber-Reinforced Polymer-Prestressed Concrete Structures

The use of plasticity-based shear design methods for fiber-reinforced polymer (FRP) reinforced and prestressed concrete, as they are used at present, is inappropriate in the long term. In particular, the use of a plasticity-based truss model for shear behavior seems to be unsound, as reliance is placed on a predominantly elastic zone to redistribute stresses. A better approach to shear design would be to employ a model incorporating force equilibrium and compatibility of strains so that the elastic properties of the FRP could be included rationally. This would help to develop a real understanding and form a basis on which new guides and codes could be founded. In tandem with a more rational analytical approach, new configurations and types of FRP reinforcement need to be developed and researched so that these materials can be used more efficiently. An analytical approach to investigate the shear response of FRP-reinforced and -prestressed concrete has been developed, based on equilibrium and compatibility across a shear discontinuity. The analytical model presented here was developed in conjunction with an experimental program. Correlation between the analytical and experimental results is good and more accurate than the current guideline provisions for concrete beams containing FRP reinforcement.     

Interface Characteristics and Laboratory Constructability Tests of Novel Fiber-Reinforced Polymer/Concrete Piles

Conventional pile materials such as steel, concrete, and timber are prone to deterioration for many reasons. Fiber-reinforced polymer (FRP) concrete composites represent an alternative construction material for deep foundations that can eliminate many of the performance disadvantages of traditional piling materials. However, FRP composites present several difficulties related to constructability, and the lack of design tools for their implementation as a foundation element. This paper describes the results of an experimental study on frictional FRP/dense sand interface characteristics and the constructability of FRP–concrete composite piles. An innovative toe driving technique is developed to install the empty FRP shells in the soil and self-consolidating concrete is subsequently cast in them. The experimental program involves interface shear tests on small FRP samples and uplift load tests on large-scale model piles. Two different FRP pile materials with different roughness and a reference steel pile are examined. Static uplift load tests are conducted on different piles installed in soil samples subjected to different confining pressures in the pressure chamber. The results showed that the interface friction for FRP materials compared favorably with conventional steel material. It was shown that toe driving is suitable for installation of FRP piles in dense soils.     

Seismic Rehabilitation of Deficient Exterior Concrete Frame Joints

The performance of rehabilitated reinforced concrete beam-column joints was compared with the response of existing joints designed to preseismic codes to assess proposed rehabilitation techniques. Six beam-column subassemblies with nonductile reinforcement detailing were tested. The joints were subjected to quasi-static load that simulates seismic forces. The first three specimens had inadequate anchorage length of the bottom beam bars. Two of them were strengthened by using carbon-fiber-reinforced polymer sheets attached to the bottom beam face and then tested. The other three specimens had no steel ties installed in the joint zone, in addition to inadequate anchorage length of the beam bars. Two of the beam-column joints were strengthened by glass-fiber-reinforced polymer jackets of the joint zone and steel rods or plates. The rehabilitation techniques were found effective in eliminating the brittle joint shear and steel bar bond-slip failure modes, and ductile beam hinging instead occurred.     

Role of Inventory Buffers in Construction Labor Performance

Buffers of material stockpile (inventory) are formed at the work level in construction to help manage production. The size of material stockpiles often has an important bearing on construction project performance. In construction projects, where conditions are often uncertain and variable, some have suggested that buffers be sized and located according to the conditions. New management thinking like lean construction and theory of constraints suggests that the size of buffers needs to be managed carefully, because when oversized, buffers are wasteful, impede workflow, and hinder performance. Research has shown that project variability can be affected with the careful deployment of buffers but has not really evaluated the impact on construction labor performance. This paper reports an exploratory analysis of the relationship between inventory (buffers) and construction labor performance with data collected from three commercial projects in Brazil. In this study, the size of the buffer between rebar fabrication and installation in the construction of a structural system is compared to the labor performance of the fabrication and installation crews. The results show that some buffer helps achieve the best labor performance in the construction operations studied.     

低能带隙聚合物的设计

低能带隙聚合物对光电器件具有重要的意义。综述了低能带隙聚合物的设计方法和思路．包括聚合物取代基修饰、降低链中交替单双键键长的差异、给体一受体的规整交替，以及梯形聚合物的合成。