轧机主传动安全销弹塑性有限元分析

本文针对轧机主传动系统的安全销在破坏前已产生了塑性变形,采用三维弹塑性有限元对安全销进行应力分析,模拟出材料的应力-应变非线性曲线,并运用牛顿-拉普森平衡迭代法根据模拟出的应力-应变非线性曲线对安全销进行应力计算,通过多次试算得出其能承受的最大载荷,并提出了改进意见.     

Kinetics of synthesis of Li4Ti5O12 through solid-solid reaction

1. Introduction The solid-solid reaction used in synthesizing various kinds of electrochemical materials has many advantages, such as simple process, without using solvent, saving energy, friendly to the environment and easy to obtain good quality materials like nano-size materials. Recently, the manufacturing of electrochemistry materials has been paid more atten- tion due to its increasing needs. Therefore it is a natural interest to study the synthesis of electro- chemical materials by usin…     

Grain-size effects in the quasi-static fracture resistance of a thermally embrittled RPV steel (quenched and tempered microstructures)

The elastic-plastic fracture toughness and crack extension behavior under the quasi-static loading regimen of several thermally embrittled conditions of a nuclear reactor pressure vessel (RPV) steel were assessed on the basis of microstructural parameters. It was discovered that the bainite packet size is the fracture properties controlling parameter of single-phase quenched and tempered microstructures. Results were found in close agreement to those obtained in a parallel study with dual-phase annealed microstructures derived from the same low alloy steel. Similarly, it was concluded that a Hall-Petch type relationship correlates J-fracture mechanics criteria to the grain size.     

离心铸造梯度功能材料凝固过程中第二相的迁移行为

金属液在离心铸造下将发生第二相质点的径向移动。本文分析了第二相质点的移动规律。     

摆动滚子从动件盘形凸轮的CAD动画设计与加工

在AutoCAD基础上利用速度瞬心进行摆动滚子从动件凸轮机构轮廓曲线的CAD动画设计,同时可以生成刀具中心的加工轨迹、计算出压力角,能够实现CAD/CAM一体化,是一种简捷实用的新方法,可以直接应用于生产实际和教学.     

高碳钢钢丝在铅浴和CMC水溶液中的冷却行为

利用钢丝探头分别测量了含碳0.70%的钢丝在铅浴和CMC水溶液中的冷却过程。用冷却曲线分析法阐释了钢丝的冷却过程和相变规律。钢丝的“体积效应”和在其冷却介质中的热扩散能力共同决定了铅浴淬火过程及钢丝的相变过程。高碳钢钢丝在0.25%CMC水溶液中可完全转变为珠光体组织,但其转变温度由于其连续冷却转变特性而高于在铅浴中的转变温度。根据铅浴淬火的冷却本质和CMC水溶液的冷却特性,用于替代铅浴的淬火介质应设法加快初始阶段冷却速率。     

预乳化工艺合成烷基糖苷

研究了以葡萄糖、月桂醇为原料,采用预乳化工艺直接合成十二烷基糖苷,考察乳化工艺及连续进料对葡萄糖的转化率和糖苷的收率的影响。     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

金属加工微乳液的研制

金属加工微乳液是继普通乳化液之后发展起来的一种新型乳化液,是一种金属加工过程中使用的水基润滑剂.由于它具备独特的性能,近几年来开始受到人们的重视.进行确定最佳配方试验,发现以75SN为基础油,MOA-3、S-80、T-80为主乳化剂,配以适当的助乳化剂、防锈剂、抗磨剂、杀菌剂等制成的金属加工微乳液最具独特的综合性能.它集润滑性、冷却性、防腐蚀性、清净分散性于一身,同时也具备透明度好,适应范围广（铜、钢、铝）长寿命、pH低、无刺激性的优势,因而特别适合于金属精密机械加工行业使用.