基桩反射波法动测曲线的数值模拟与特征分析

采用美国PDI公司开发的PDI-S软件,对不同缺陷基桩的反射波法低应变动测曲线进行数值模拟,对动测曲线的特征进行归纳与总结,以便在解释反射波法曲线时作为参考与借鉴,提高基桩质量检测的可靠度。     

Spontaneous emulsification aspect of enhanced oil recovery

Recent studies have suggested the possibility of spontaneous emulsification as a mechanism for enhanced oil recovery (EOR). The discussions have, however, remained essentially qualitative. A study was therefore undertaken to estimate quantitatively the contribution of spontaneous emulsification as an EOR mechanism. The tests were conducted on several bulk liquid/liquid systems as well as by displacement experiments in unconsolidated synthetic sand packs. Spontaneous emulsification was found to be a mechanism for EOR: the estimated extra contribution to EOR due to this mechanism was found to be significant in laboratory scale displacement experiments. Tertiary recovery was always greater when spontaneous emulsification was evident than otherwise. Results of tests on bulk liquid/liquid systems indicate that the occurrence or absence of spontaneous emulsification can be correlated with the values of ‘partition parameter’. It may be concluded that higher oil recoveries may be achieved in chemical EOR processes where interface mass transfer (and the accompanying spontaneous emulsification) occurs. The evaluation of efficiency of residual oil mobilisation through the capillary number theory (with and without spontaneous emulsification) is also discussed. Displacement tests with spontaneously emulsifying systems showed that residual oil left behind a conventional waterflood was mobilised in a range of capillary numbers much less than that which applies to low-tension waterfloods.     

修正步冷温度曲线试验研究

按修正步冷温度曲线对经步冷脆化的 2 .2 5Cr 1Mo和在加氢反应器内运行 5a的 2 2 5Cr 1Mo试块进行了修正步冷试验 ,评定了材料的回火脆性。结果表明 ,按修正步冷曲线进行修正步冷试验能使已经脆化的材料进一步脆化 ,为加氢反应器材料损伤的研究提供了一条途径。     

非化学计量LaNi5型储氢合金的性能

采用富La混合稀土与Ni、Co、Mg等元素组合，获得了一种非化学计量LaNi5型储氢合金、用金相、XRD和SEM-EDX等方法分析了该合金的组织结构，研究了合金的气相储氢特性以及电化学性能，结果表明：在1.6MPa氢压和温度29℃下，该合金的储氢量达到1.58%（质量分数），该合金的放电容量为380mAh/g。经300次循环后容量保持率为55%，该合金的基体是CaCu5型结构的LaNi5相，但有第二相（LaMg)Ni3析出，这种第二相的形成是导致该合金大容量的关键。     

Quantitative evaluation of generator power control effect of FACTS controllers for power system stabilization

The advancement of power electronics technologies has significantly developed the power system stabilizing controllers. Quantitative as well as qualitative evaluation of their effectiveness in power systems is a matter of great importance for the feasibility investigation of these apparatus. In this paper, the possible control region of FACTS controllers with series and/or shunt configuration in a single machine to infinite bus system is formulated in the powerangle curve with a set of algebraic equations. The effectiveness of TCPST (Thyristor‐Controlled Phase Shifting Transformer), SSSC (Static Synchronous Series Compensator), and TCSC (Thyristor‐Controlled Series Compensator) for the improvement of the transient stability is evaluated quantitatively as a numerical example. The correctness of the proposed method has been confirmed by analysis based on the electromagnetic transients simulation with a detailed system model. © 2001 Scripta Technica, Electr Eng Jpn, 138(3): 43–51, 2002     

环境因素对碳钢点蚀临界电势的影响

采用动电势扫描法测定了不同体系中碳钢发生点蚀的临界电势Eb。结果表明 :当Cl- 浓度 <0 .0 1mol/L时 ,随Cl- 浓度增加 ,临界电势负移并与Cl- 浓度成线性关系 ;pH值在 7～ 11之间 ,随pH值增加 ,临界电势正移并与pH值成线性关系 ;随温度增加 ,临界电势负移并与温度成线性关系。     

钢纤维混凝土轴拉应力-应变特性的试验研究

本文采用环氧粘接法对4种纤维混凝土材料进行了轴向拉伸试验，成功地获得了材料的应力-应变全曲线。根据其试验曲线是否出现第二峰值，把纤维分为增强与增韧两大类。通过分析表明：不同的纤维形式对混凝土材料的作用机理有较大的差异。在工程应用中，应根据纤维混凝土材料的用途来选择纤维类型。     

MATLAB在离心式水泵性能曲线测定中的应用

长期以来 ,离心式水泵性能测定和曲线绘制工作无论是对生产厂家还是对用户都是很必要 ,但又是很繁杂的 .随着计算机技术的发展 ,数学正以其解决实际问题的卓越能力进入到各种领域 .从而使离心式水泵性能测定和曲线绘制工作得以简化 .MATLAB的出现又使离心式水泵的性能曲线的绘制达到了更加快速、准确、直观 .     

计算机辅助设计中浓淡曲线的设计

本文介绍利用Super Frame软件进行色彩浓淡设计的原理、方法和步骤。据此原理和方法,使用C语言设计开发出了应用实例——折线浓淡分布曲线。