Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.     

Geometry-Dependent R-Curve for Quasi-Brittle Materials

Fracture of quasi-brittle materials such as ceramics and cement-based materials can be described by an R -curve, defined as fracture resistance. The R -curve can be constructed as the envelope of the strain energy release rates ( G ). In this study, R -curve is defined as an envelope of G -curves obtained by varying the dimensions of identical specimens, while keeping the geometry and the initial flaw size constant. By approximating the G -curve with a second-order function of the crack length, a simple formulation of the R -curve is derived by solving a differential equation. Three parameters are needed for the proposed R -curve. These parameters can be obtained by testing a notched-beam specimen and using linear elastic fracture mechanics. The proposed R -curve simulates well the geometry dependency as well as other characteristics of the fracture response of quasi-brittle materials.     

渐变填充的性质和算法

本文着重研究了Jordan数字流形上的渐变填充,设计了紧缩渐变填充算法和分裂渐变填充算法;并证明:如果D是离散网格空间上的Jordan凸集,那么存在O(|D||D|)时间的紧缩算法去做渐变填充.最后,我们对Jordan正方形区域、三角域和圆盘,分别给出了它们各自的O(|D|log_2|D|)时间的分裂渐变填充算法.     

一种测量天空亮度的新方法

本文介绍了一种测量天空亮度分布的新方法。这种方法利用视场角为180°的鱼眼镜头照相机和计算机数字图像处理系统,实现了天空亮度分布的瞬时测取和胶片密度的高效率处理。文中论述了胶片灰度与天空亮度的标定转换实验方法。引用了误差理论中的数据处理方法确定出二者间的函数关系。通过对昆明和重庆地区晴和阴天空下大量实测结果的误差处论和分析,得到了其相关系数和标准偏差的频数分布图,由此证明了这种方法的可靠性。     

Emulsifying Capacity and Emulsion Stability of Soy Proteins Compared with Corn Germ Protein Flour

Both emulsifying capacity (EC) and emulsion stability (ES) increased with increasing concentrations from 0.4% to 0.8% of soy flour (SF), soy concentrate (SC), soy isolate (SI) and corn germ protein flour (CGPF) when studied by response surface methodology. EC and ES increased as pH increased from 6 to 8 in all samples. Increasing incubation temperatures of protein solutions from 20–70°C or from 4–20°C did not affect EC or ES, respectively. SF had the highest EC, followd by SI, SC, and CGPF.     

塔巴庙区块气层录井参数分析研究

塔巴庙区块气藏属于低压、低渗气藏,储集层物性差异大、含气级别高,但含气非均质性强,录井解释评价困难。针对这一问题,开展了综合判断储集层物性和含气性方面的研究,分别探讨了钻时与全烃、钻井液性能与全烃、钻井液粘度与全烃、气测显示与测井参数和烃组分与气显示之间的关系,分析了其相关性及其在塔巴庙区块气层解释评价中的意义及作用。通过相关性研究,不但摸索出定性解释评价气层的方法,同时为今后深入研究录井相关参数关系,探索其内在规律,为实现准确解释评价储集层奠定了基础。     

基于椭圆曲线上EIGamal公钥体制的数字签名方案

论文提出了基于椭圆曲线上EIGamal加密体制的数字签名方案，并出于安全性的考虑进行了一点改动。另外，应用了Tate配对对签名进行验证。     

气体悬浮焙烧炉内衬烘炉曲线的确定

根据所使用的低水泥浇注料的性能，对中铝山西分公司检修厂4号焙烧炉制定了合理的烘烤曲线，提高了耐火内衬的质量，延长了内衬的使用寿命。     

提高中高含水期油井压裂经济效益的方法

为提高葡北油田中高含水期油井压裂经济效益，合理选择压裂井层尤为重要。应用水驱特征曲线预测出油井压裂前可采储量，从而计算出剩余可采储量及可采储量采出程度，通过绘制油井压裂前剩余可采储量及可采储量采出程度与油井压裂后所创经济效益之间关系曲线，寻找出相关规律，进行优选压裂井，再根据精细地质研究成果，在剩余油富集区选择具体压裂层位。经实际应用，取得了较好效果，提高了油井压裂方案符合率，提高了经济效益，进而总结出一套适合葡北油田中高含水期油井压裂选井选层方法，对今后进一步搞好油井压裂增产工作具有指导意义。     

1270轧机弹性曲线的回归及参数估计

首先介绍了轧机弹性曲线的基础知识及 1 2 70轧机AGC系统的基本结构 ,然后论述了数据采集的方法 ,最后根据最小二乘法得到轧机弹性曲线的回归模型及刚度系数的实验结果。