丙烯酸酯与甲基丙烯酸酯的共聚及性能研究

采用悬浮聚合法，以丙烯酸－２－乙基－己酯与甲基丙烯酸十二酯为单体，合成了共聚型高吸油性树脂。研究了共聚单体的配比、交联剂用量、引发剂用量诸因素对高吸油性树脂的性能影响。制得的树脂可以吸其自身质量的１１．８倍的煤油、１４．７倍的苯、６．５倍的泵油。     

Extraction of penicillin G from simulated media by an emulsion liquid membrane process

The extraction of penicillin G from simulated media was performed by water/oil/water (w/o/w) emulsion liquid membranes (ELMs) and studied under various operational conditions in a batch system. The degree of extraction achieved was between 80% and 95% under specific conditions. A concentration of greater than nine times the initial concentration of penicillin G in the external phase was obtained in the internal phase. The pH of the internal aqueous solution, containing a basic salt, was theoretically calculated on the basis of the amount of penicillin G transported into the internal phase. The calculated results agreed with the experimental data well and were used to select a suitable type and concentration of a basic salt in the internal phase to give a pH within the range 5 to 8 where penicillin G was stable after the termination of extraction. The extraction of penicillin G was successfully performed by the ELM process with sodium carbonate in the internal phase.     

Surface tailoring of an ethylene propylene diene elastomeric terpolymer via plasma‐polymerized coating of tetramethyldisiloxane

In the research presented here, we explore the use of a low‐energy plasma to deposit thin silicone polymer films using tetramethyldisiloxane (TMDSO) (H(CH₃)₂? Si? O? Si? (CH₃)₂H) on the surface of an ethylene propylene diene elastomeric terpolymer (EPDM) in order to enhance the surface hydrophobicity, lower the surface energy and improve the degradation/wear characteristics. The processing conditions were varied over a wide range of treatment times and discharge powers to control the physical characteristics, thickness, morphology and chemical structure of the plasma polymer films. Scanning electron microscopy (SEM) shows that pore‐free homogeneous plasma polymer thin films of granular microstructure composed of small grains are formed and that the morphology of the granular structure depends on the plasma processing conditions, such as plasma power and time of deposition. The thicknesses of the coatings were determined using SEM, which confirmed that the thicknesses of the deposited plasma‐polymer films could be precisely controlled by the plasma parameters. The kinetics of plasma‐polymer film deposition were also evaluated. Contact angle measurements of different solvent droplets on the coatings were used to calculate the surface energies of the coatings. These coatings appeared to be hydrophobic and had low surface energies. X‐ray photoelectron spectroscopy (XPS) and photoacoustic Fourier‐transform infrared (PA‐FT‐IR) spectroscopy were used to investigate the detailed chemical structures of the deposited films. The optimum plasma processing conditions to achieve the desired thin plasma polymer coatings are discussed in the light of the chemistry that takes place at the interfaces. Copyright © 2004 Society of Chemical Industry     

Cationic ring-opening polymerization of hexamethylcyclodisilazane: General aspects and tentative mechanisms

The ring-opening polymerization of hexamethylcyclodisilazane (D_2NMe), initiated by methyl triflate in 1,2-dichloroethane, forms in the first, fast kinetic step both linear polymer and cyclic dimer (D_4NMe). Subsequently a slow depolymerization process occurs leading to exclusively cyclotrisilazane (D_3NMe). On the basis of kinetic measurements carried out using an adiabatic calorimetric technique and complementary experiments, mechanisms of both propagation, cyclization and back-biting reactions are proposed. The influence of the reaction temperature was also studied; it is demonstrated that, at low temperature, polymerization does not lead to cyclic oligomer formation. In such conditions, the polymerization presents a ‘living’ character.     

Microfabrication by X‐ray‐induced polymerization above the lower critical solution temperature

A polymer synthesis method is presented in which chain growth driven by exothermic reaction stimulates a gradual chain collapse. The globular precipitates in such systems can be restrained from coalescing by polymerizing in a quiescent environment. Time‐resolved small‐angle scattering study of the methacrylic acid polymerization kinetics in a quiescent system above its lower critical solution temperature (LCST) in water reveals the following features of this method: (a) growing oligomers remain as rigid chains until a critical chain length is reached, at which they undergo chain collapse, (b) radius of gyration increases linearly with time until a critical conversion is reached, and (c) radius of gyration remains constant after the critical conversion, even while conversion is gradually increasing. Following this self‐stabilizing growth mechanism, we show that nanoparticles can be directly synthesized by polymerizing N‐isopropylacrylamide above its LCST in water. The average size of nanoparticles obtained from a polymer–solvent system is expected to be the maximum extent of reaction spread at that monomer concentration. This hypothesis was then verified by polymerizing N‐isopropylacrylamide above their LCST in water, but by initiating the reaction with X‐rays shielded by a mask. The microfabricated patterns conform well to the size and shape of the mask used confirming that the growing chains do not propagate beyond the exposed regions as long as the reaction temperature is maintained above the LCST. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 429–425, 2006     

纳米镓/聚甲基丙烯酸甲酯复合材料的原位超声合成与表征

超声作用于低熔点金属镓,使其超细化为纳米级的镓粒子,并采用无引发剂的乳液聚合方法制备出GA/聚甲基丙烯酸甲酯(PMMA)纳米复合粒子,并分析了其微观结构。结果表明纳米镓的形态和结构因有无表面改性剂而不同;乳液聚合得到的纳米镓复合粒子是核壳结构型,粒子大小为50~80 NM,内核金属镓粒径为30~50 NM,与聚合物存在一定的化学作用。     

有机镍化合物催化烯烃聚合的研究进展

综述了有机镍化合物如烯丙基镍、乙酰丙酮镍、茂镍、二亚胺镍等催化烯烃聚合的研究进展。有机镍化合物可催化烯烃、α-烯烃(如乙烯、丙烯等)的齐聚及聚合、催化极性单体(如甲基丙烯酸甲酯、降冰片烯等)以及位阻较大的环烯烃、取代二烯烃、苯乙烯等的均聚和共聚。     

Emulsifying Capacity and Emulsion Stability of Soy Proteins Compared with Corn Germ Protein Flour

Both emulsifying capacity (EC) and emulsion stability (ES) increased with increasing concentrations from 0.4% to 0.8% of soy flour (SF), soy concentrate (SC), soy isolate (SI) and corn germ protein flour (CGPF) when studied by response surface methodology. EC and ES increased as pH increased from 6 to 8 in all samples. Increasing incubation temperatures of protein solutions from 20–70°C or from 4–20°C did not affect EC or ES, respectively. SF had the highest EC, followd by SI, SC, and CGPF.     

The emulsifying properties of a polysaccharide isolated from the fruit of Cordia abyssinica

Polysaccharide was isolated from Cordia abyssinica and its effect, at differing concentrations, on its emulsifying ability was determined. Emulsions of vegetable oil containing up to 1% of the polysaccharide in phosphate pH 7.4 buffer, were prepared by using a hand piston homogenizer. Emulsification was assessed by diluting samples of the emulsions in sodium dodecyl sulphate and measuring absorbance at 500 nm. Addition of increasing concentrations of the polysaccharide up to 1% enhanced emulsification and emulsion stability. Above 1% concentration the polysaccharide solutions were too viscous for making emulsions conveniently. At a constant concentration of the polysaccharide, addition of up to a 1% concentration of salt enhanced emulsion formation. Further addition of salt above 1% resulted in no further changes in emulsifying ability, but the stability of the emulsions formed decreased on increasing the concentration of salt above 1%. The effect of pH on emulsifying ability was investigated by preparing emulsions using buffers of different pH, from pH 3 to pH 13. The polysaccharide had poor emulsifying ability below pH 7. Emulsifying ability increased with pH between pH 7 and 11. At pH above 11 there was a decrease in emulsifying ability.     

高耐水高光泽苯丙乳液研究

采用反应型乳化剂AMPS及常规乳化剂合成了一种高耐水高光泽苯丙乳液。讨论了合成工艺、引发剂、乳化剂、AMPS等对乳液的影响。乳液中乳化剂含量 0 .9% (占单体 ) ,耐水性 14 4h不变白。