3,9-二羟甲基-3′,9′-二苯基-1,5,7,11-四氧杂螺环[5,5]十一烷的合成及聚合反应

利用苯乙醛与甲醛之间的坎尼扎罗反应合成２－苯基－２－羟甲基丙二醇，进而合成新的螺环化合物：３，９－二羟甲基－３′，９′－二苯基－１，５，７，１１－四氧杂螺环［５，５］十一烷．通过红外光谱、核磁共振氢谱和元素分析证实了它的组成和结构．在三氟化硼单乙胺络合物的作用下，该化合物能够进行双开环聚合反应．用膨胀计法跟踪测试了在聚合反应过程中它的体积膨胀率约为３．８％，并对聚合反应机理作了初步探讨．     

正交试验优化复合纳滤膜复合条件

采用聚砜基膜，以哌嗪水溶液与均苯三甲酰氯正己烷有机溶液发生界面聚合反应，在聚砜基膜上形成一超薄脱盐层，从而制备聚哌嗪酰胺复合纳滤膜．制备过程中影响复合纳滤膜性能的因素是多方面的．着重讨论了水相浓度、有机相浓度、有机相处理时间的影响．采用正交试验法对制备条件进行优化，制得性能较佳的复合纳滤膜．     

Plasma copolymer membranes of acrylic acid and the adsorption of lysozyme on the surface

Plasma copolymerization was carried out from the monomer mixtures of acrylic acid with hexamethylxdisilozane and hexametydisillazane, and the membranes composed of the Si-C and/or Si-O networks sustaining carboxylic acid group were fabricated. The carboxylic acid contents were dependent on the discharge power conditions as well as the monomer ratio, and carboxylic acid was introduced at the more density in the polymerization by plasmas under the moderate power conditions. The plasma polymer coatings were effective for the adsorption of lysozyme especially on the plasma copolymer films of acrylic acid.     

Robust flexible LCDs with paintable technology

Abstract— In this article, second‐generation liquid‐crystal displays (LCDs) made by Paintable LCD technology is presented. With this technology, LCDs are manufactured by a sequence of simple coating and UV curing processes. Since the process can be carried out on plastic substrates and the stack of optical layers is only tens of micrometers thick, the resulting LCDs are ultra‐thin and flexible.     

^60Co辐照对芳基乙炔预聚体热聚合物性能的影响

为了探讨辐照对芳基乙炔预聚体及聚芳基乙炔（PAA）性能的影响,采用^60Co对芳基乙炔预聚体及PAA进行辐照,并运用DSC和TGA对芳基乙炔预聚体热聚合过程和PAA的性能进行了研究。研究结果表明：（1）辐照的芳基乙炔预聚体聚合热减小;（2）经预辐照热聚合的PAA比未经预辐照直接热聚合的PAA的耐热性好;（3）PAA经辐照后处理,耐热性能提高。这些结果表明辐照能有效改善PAA的耐热性能。     

聚双正丁氧基磷腈的合成与表征

通过六氯环三磷腈的热开环聚合合成了线性聚二氯磷腈(PDCP)中间体,探讨了聚合时间、聚合温度单体纯度及空气湿度等对PDCP合成的影响,采用FT-IR、TGA对PDCP进行了表征。TGA结果表明,PDCP呈现明显的二段降解性;通过正丁醇对PDCP进行亲核取代合成了聚双正丁氧基磷腈,采用FT-IR、TGA、SEM对聚双正丁氧基磷腈进行了表征,TGA结果表明,聚双正丁氧基磷腈具有优良的热稳定性和较高的残留率,SEM结果表明,材料形貌呈现无定形态分布,而且其表面比较光滑无明显缺陷。     

Biomimetic micropatterning of silica by surface-initiated polymerization and microcontact printing

Micropatterns of silica on a gold substrate were generated by a biomimetic approach, namely, the biosilicification of silicic acids. The procedure consists of three simple steps: pattern generation of a polymerization initiator, (BrC(CH(3))(2)COO(CH(2))(11)S)(2), by microcontact printing; surface-initiated, atom-transfer radical polymerization of 2-(dimethylamino)ethyl methacrylate (DMAEMA) from the patterned area; and polycondensation of silicic acids. The tertiary amine-containing polymer, pDMAEMA, aided in the spatially controlled polycondensation of silicic acids on surfaces in the presence of phosphate ions, and micropatterns of silica on a gold substrate were successfully generated in combination with the technique of microcontact printing. The procedure could be extended to the controlled fabrication of silica patterns with any size, shape, or thickness.     

淀粉微球的制备及其工艺的优化

以可溶性淀粉为原料,N,N'-亚甲基双丙烯酰胺(MBAA)及环氧氯丙烷(ECH)为交联剂,利用反相悬浮聚合法合成了淀粉微球,通过单因素实验和正交实验对制备工艺进行了优化,利用粒度分析仪、红外光谱仪对产物进行了表征.结果表明:MBAA用量及油水相体积比是影响微球粒径的主要因素;所得微球粒度分布范围较窄,具有多种活性基团,可用作药物载体和吸附剂.     

1,3,5-三甲基-1,3,5-三(3′,3′,3′-三氟丙基)环三硅氧烷的阴离子开环(共)聚合研究进展

1,3,5-三甲基-1,3,5-三(3′,3′,3′-三氟丙基)环三硅氧烷(F3)的阴离子开环聚合可以合成优越耐油耐溶剂性能的聚甲基三氟丙基硅氧烷(PMTFPS),但在开环聚合过程中“反咬”与再分布副反应严重,要得到高分子量、高产率的氟硅聚合物材料,必须严格控制聚合反应条件。文中总结了本体、溶液、细乳液中F3的阴离子开环聚合影响因素、机理与动力学,以及F3与其它单体共聚合反应等方面的研究进展。     

醋酸分子印迹电化学传感器的制备

基于循环伏安电化学聚合方法,以30mmol/L醋酸作为模板分子,5mmol/L苯酚作为功能单体,0.1mol/L氯化钾和0.05mol/L磷酸盐缓冲溶液(pH=5.4)作为聚合底液,聚合电位为-0.8~1.2V,扫描圈数为20,以0.1mol/L碳酸氢钠溶液作为洗脱液进行洗脱20min,最终制得性能较佳的醋酸分子印迹电化学传感器。对该传感器进行循环伏安(CV)表征、阻抗表征、扫描电镜的形貌表征、差分脉冲表征,探索了不同pH磷酸盐缓冲溶液作为聚合底液、不同浓度洗脱液和不同洗脱时间对该传感器性能的影响。发现在以0.05mol/L磷酸盐缓冲溶液(pH=5.4)作为最佳底液条件下,醋酸分子印迹电化学传感器与0~45×10^-9 mol/L浓度范围内醋酸分子二者呈现出良好的线性关系,其检出限为2.85×10^-9 mol/L,同时研究了该传感器的重现性和稳定性。