Dynamic mechanical and tensile properties of poly(N-vinyl pyrrolidone)-poly(ethylene glycol) blends

Mechanical properties of miscible blends of high molecular weight poly(N-vinyl pyrrolidone) (PVP) with a short-chain, liquid poly(ethylene glycol) (PEG) of molecular weight 400 g/mol have been examined as a function of PVP-PEG composition and degree of hydration. The small-strain behavior in the linear elastic region has been evaluated with the dynamic mechanical analysis and compared with the viscoelastic behavior of PVP-PEG blends under large strains in the course of uniaxial drawing to fracture and under cyclic extension. A strong decoupling between the small-strain and the large strain properties of the blends has been observed, indicative of a pronounced deviation from rubber elasticity in the behavior of the blends. This deviation, also seen on tensile tests under fast drawing, is attributed to the peculiar phase behavior of the blends and the molecular mechanism of PVP-PEG interaction. Nevertheless, for the PVP blend with 36% PEG, under comparatively low extension rates, the reversible contribution to the total work of deformation up to ε=300% has been found to be maximum at around 70%, while the blends containing 31 and 41% PEG behave rather as an elastic-plastic solid and a viscoelastic liquid, respectively.     

高效乙烯聚合催化剂的制备——I．催化剂的制备规律

研究了新型含镁络合物的结构、性质及其用于制备高效乙烯聚合催化剂的制备规律。结果表明：将镁、有机醇以及不与镁发生“格式反应”的卤代烷相互作用可迅速发生反应形成新型含镁络合物溶液。该络合物在溶液中可析出结晶。具有特定的化学结构．可以均匀承载于多孔硅胶的孔隙中，负载TiCl4后制备出形态良好的球形高效乙烯集合催化剂。     

Synthesis and characterization of poly(ϵ‐caprolactone)‐b‐poly(ethylene glycol) block copolymers prepared by a salicylaldimine‐aluminum complex

A series of poly(?‐caprolactone)‐b‐poly(ethylene glycol) (PCL‐b‐PEG) block copolymers with different molecular weights were synthesized with a salicylaldimine‐aluminum complex in the presence of monomethoxy poly(ethylene glycol). The block copolymers were characterized by ¹H NMR, GPC, WAXD, and DSC. The ¹H NMR and GPC results verify the block structure and narrow molecular weight distribution of the block copolymers. WAXD and DSC results show that crystallization behavior of the block copolymers varies with the composition. When the PCL block is extremely short, only the PEG block is crystallizable. With further increase in the length of the PCL block, both blocks can crystallize. The PCL crystallizes prior to the PEG block and has a stronger suppression effect on crystallization of the PEG block, while the PEG block only exerts a relatively weak adverse effect on crystallization of the PCL block. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and characterization of cleavable surfactants derived from poly(ethylene glycol) monomethyl ether

A series of noncyclic acetal-linked cleavable surfactants were simply prepared by condensation of aldehydes with poly(ethylene glycol) monomethyl ethers. All of the products were characterized by¹H nuclear magnetic resonance. Their hydrophile-lipophile balance, surface tension, cloud point, critical micelle concentration, and foam height were determined. Hydrolysis kinetic studies, followed by gas chromatography, showed that they had higher hydrolytic reactivity in acidic solution than cyclic acetal-linked cleavable surfactants.     

Synthesis, characterization and properties of chitosan modified with poly(ethylene glycol)-polydimethylsiloxane amphiphilic block copolymers

Synthesis of poly(ethylene glycol)-polydimethylsiloxane amphiphilic block copolymers is discussed herein. Siloxane prepolymer was first prepared via acid-catalyzed ring-opening polymerization of octamethylcyclotetrasiloxane (D₄) to form polydimethylsiloxane (PDMS) prepolymers. It was subsequently functionalized with hydroxy functional groups at both terminals. The hydroxy-terminated PDMS can readily react with acid-terminated poly(ethylene glycol) (PEG diacid) to give PEG-PDMS block copolymers without using any solvent. The PEG diacid was prepared from hydroxy-terminated PEG through the ring-opening reaction of succinic anhydride. Their chemical structures and molecular weights were characterized using ¹H NMR, FTIR and GPC, and thermal properties were determined by DSC. The PEG-PDMS copolymer was incorporated into chitosan in order that PDMS provided surface modification and PEG provided good water swelling properties to chitosan. Critical surface energy and swelling behavior of the modified chitosan as a function of the copolymer compositions and contents were investigated.     

Preparation of glycol derivatives of partially hydrogenated soybean oil fatty acids and their potential as lubricants

Glycol diesters and mixtures of mono- and diesters have been prepared from methyl esters of partially hydrogenated soybean oil fatty acids and diethylene, dipropylene, neopentyl and triethylene glycols. The catalyst used in these reactions was a mixture of calcium acetate/barium acetate (3∶1, w/w). The reactions were carried out under nitrogen with 0.5% catalyst at temperatures in the range of 190–275°C. Borated esters of mixed mono- and diesters were prepared with 0.33 equivalent of boric acid per 1.0 equivalent hydroxyl group on the ester. Refractive indices, viscosities, and flash and fire points were determined for diesters, mixed mono- and diesters, and mixed diesters and borated esters. The viscosities, flash points and fire points indicate that these esters can be used as a component of lubricating oils. Wear-prevention characteristics of mixed diesters and borated esters indicated that they can be used as antifriction additives in lubricating oils. Lecture presented at the joint meeting of the International Society for Fat Research and the American Oil Chemists' Society in Toronto, May 10, 1992.     

密度泛函方法的ZSM-5分子筛上苯与乙烯烷基化反应机理研究

采用密度泛函(DFT)方法对于ZSM-5分子筛上苯与乙烯的烷基化反应机理进行研究。选取了包含酸性质子的8T原子簇模型代表ZSM-5分子筛的部分结构。采用B3LYP/6-31G(d)水平从生成能与反应活化能角度对于烷基化反应发生时可能存在的2种联合机理和一种分步机理进行了计算与比较。结果表明,联合反应机理中乙烯的质子化和C-C键的形成同时发生,而分步机理开始于乙醇盐中间体的生成,随后与苯反应生成反应产物。分步机理中乙醇盐中间体生成步骤的活化能(124.55 kJ/mol)低于联合机理的反应活化能(168.98 kJ/mol和156.06 kJ/mol),而烷基化步骤的活化能(209.35 kJ/mol)高于联合机理的反应活化能,由此可以推断ZSM-5分子筛上苯与乙烯的烷基化反应时2种机理同时发生,存在竞争关系。     

PE-LLD／EVA／Mg（OH）2／复合阻燃剂高效无卤阻燃体系的研究

采用线形低密度聚乙烯/乙烯-醋酸乙烯共聚物作为复合材料主体,表面处理过的氢氧化镁(Mg(OH)2)为主阻燃剂,以微胶囊化红磷和自制硅类阻燃剂为核心的复合阻燃剂为阻燃增效剂,重点探讨了Mg(OH)2和复合阻燃剂的阻燃效果。结果表明,Mg(OH)2与复合阻燃剂并用具有良好的协同效应,当Mg(OH)2用量40份,复合阻燃剂5～7份时,可获得较高的氧指数,垂直燃烧试验通过FV0级,且材料抗静电能力提高,力学性能、加工性能较好。     

Study on the properties of crosslinking of poly(ethylene oxide) and hydroxyapatite–poly(ethylene oxide) composite

This study covers the crosslinking of poly(ethylene oxide) (PEO) and its composite with calcium hydroxyapatite (HA), their mechanical and swelling properties, and morphology. Sheets of the composites of PEO (two different grades with M_v: 5 × 10⁶ and 2 × 10⁵) and HA and neat PEO were prepared by compression molding. The prepared composite and PEO (0.1‐mm‐thick) sheets were crosslinked with exposure of UV‐irradiation in the presence of a photoinitiator, acetophenone (AP). This simple method for crosslinking, induced by UV‐irradiation in the presence of AP, yielded PEO with gel content up to 90%. Gel content, equilibrium swelling ratio, and mechanical and morphological properties of the low molecular weight polyethylene oxide (LMPEO)–HA crosslinked and uncrosslinked composites were evaluated. Although the inclusion of HA into LMPEO inhibits the extent of crosslinking, the LMPEO–HA composite with 20% HA by weight shows the highest gel content, with appreciable equilibrium swelling and mechanical strength. The growth of HA in simulated body fluid solutions on fractured surfaces of LMPEO and also LMPEO–HA was found to be very favorable within short times. The dimensional stability of these samples was found to be satisfactory after swelling and deposition experiments. The good compatibility between the filler hydroxyapatite and poly(ethylene oxide) makes this composite a useful tissue‐adhesive material. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 488–496, 2003     

Production of propylene glycol fatty acid monoesters by lipase-catalyzed reactions in organic solvents

Fatty acid monoesters of propylene glycol (1,2-propanediol) are good water-in-oil emulsifiers. These esters were synthesized enzymatically to overcome the problems associated with chemical processes. APseudomonas lipase was added to reaction mixtures containing propylene glycol and various acyl donors (fatty acids, fatty acid ethyl esters, fatty acid anhydrides and triglycerides) in organic solvents, and the mixtures were shaken at 30°C. The products were analyzed by gas chromatography. The yield of monoesters was affected by the acyl donors, organic solvents, temperature, water content, pH memory and reaction time. The anhydrous (lyophilized) enzyme and fatty acid anhydrides were best for monoester production. The optimum pH ranges were 4–5 and 8–10. The yields of propylene glycol monolaurate, monomyristate, monopalmitate, monostearate and monooleate with 50 mM fatty acid anhydrides as acyl donors were 97.2, 79.6, 83.7, 89.7 and 93.4 mM, respectively; those with 50 mM fatty acids as acyl donors were 37.3, 28.7, 28.7, 35.3 and 36.2 mM, respectively. The yields of propylene glycol monopalmitate, monostearate and monooleate with 50 mM triglycerides as acyl donors were 87.4, 65.1 and 83.2 mM, respectively.