弱激发氩离子激光的振荡频率特性

通过改变激光器的相对激发,观察到了氩离子激光器振荡频率的演变特性。用模竞争效应对实验现象进行了理论解释。     

含油污泥焦化处理实验研究

采用焦化方法对含油污泥进行处理。经过筛选选取活性白土作为焦化处理催化剂,分别研究了反应时间、反应温度、氮气吹扫量、加热速率等因素对处理效果的影响。4个影响因素对液相油品收率的影响顺序为:氮气吹扫量>反应温度>反应时间>加热速率;对反应转化率的影响顺序为:反应温度>反应时间>氮气吹扫量>加热速率。较为理想的反应参数:反应温度490℃;反应时间60min;氮气吹扫量90mL.min-1;加热速率4℃.min-1。在此反应条件下,含油污泥液相油品收率>80%,反应转化率>99.9%,经焦化处理后的废渣含油率<3‰,达到农用污泥排放标准,实现了达标排放和回收资源的目的。     

Application d'une méthodologie expérimentale à l'étude du diagramme ternaire d'un gel

Nous avons montré sur l'exemple d'un gel, mélange de trois constituants (C12–C15 Alcohols Benzoate, Cyclomethicone et Ethylene Vinyl Acetate Copolymer) qu'il est possible d'optimiser une formulation en un nombre preécis d'essais en faisant appel à une stratégic expérimentale optimale. Le gel avait déjàétéétudié par Chang,¹ mais par approches successives.
Nous avons utlisé les matrices d'expériences développées dans le cas des mélanges par Scheffe sous le nom de 'reseaux-simplex'. Prévoyant des intéractions de 2éme ordre entre les constituants nous avons retenu le modéle appelé'cubique réduit'. Cette approche permet l'exploration systémique de tout le domaine.
Les réponses étudiées sont la compatibilité (gel homogène ou non), la consistance, la blancheur et le coût. Le meilleur gel étant celui qui se rapproche le plus de la vaseline.
A partir des résultats, nous avons tracé des courbes d'isoréponse en blancheur, consistance et coût. La superposition des diagrammes conduit à la détermination d'une zone où les réponses sont optimales.
En ajoutant la réponse supplémentaire: 'facilité d'étalement sur la peau'on arrive au meilleur gel avec un nombre réduit d'essais.
La même méthode s'appliquerait à des mélanges de plus de trois constituants.
Study of a ternary diagram gel according to a methodology of experimental research     

砂岩气藏水基欠平衡钻井逆流自吸效应实验研究

采用水基钻井液欠平衡钻开砂岩气层时，欠平衡压差往往并不能完全抵消岩石的自吸毛细管力，从而产生逆流自吸效应。这种自吸效应可能对砂岩气藏水基欠平衡钻井的储层保护效果产生影响，但目前与之有关的实验研究还很缺乏。为此，设计了一套实验装置，模拟水基欠平衡条件，研究了砂岩基块孔隙逆流自吸规律及其影响因素。结果表明，水基欠平衡钻井过程的逆流自吸效应引起岩石气相渗透率降低，削弱欠平衡钻井的储层保护效果；欠平衡压差越小，逆流自吸作用越强，过小的欠压值不能起到欠平衡钻井保护储层的作用；随着逆流自吸时间延长、围压增加和黏土矿物膨胀，逆流自吸导致气相渗透率下降的程度加剧；逆流自吸引起的气相渗透率下降速率可以表示成时间的幂函数。     

Stress Concentration Factors for a Circular Hole in Curved Beams Under Bending Loads

Abstract: As a contribution to the field of stress concentration studies, the case of circular hole in curved bar elements under bending is hereby studied. Trend values of stress concentration factors (SCF) are presented based on selected variables of the problem for two critical hole locations. The results will help to identify an SCF law for practical use by applying the statistical method of regression analysis. Two approximations obtained by means of computational methods are compared with those obtained by photoelastic experimental method.     

复合射孔枪枪身材料动态本构关系的试验研究

为确定复合射孔枪枪身材料32CrMo4钢在井下高温、高加载率工作环境下的动态性能,利用MTS试验机和分离式Hopkinson冲击压杆装置做了应变率为0.001、1000和3000/s,温度为294、373、473和573K的单轴动态压缩试验,得到32CrMo4钢各组温度及应变率下的流动应力-应变曲线。拟合得到该钢Johnson-Cook本构关系模型所需的5个参数,模型拟合曲线与试验曲线吻合。     

部件试验模态综合的简便方法

本文将一种基于完备模态基的模态综合技术应用于子结构的试验模态综合,获得成功。这种半试验半理论的模态综合方法是一种较为简便的、要求试验工作量较小的试验模态综合法,因为它只要求测量子结构的振动模态和频率即可。数值仿真结果表明,这种简便的试验模态综合法是行之有效的。     

Homogenization of hardness distribution and distortion in high pressure gas quenching

Quenching with gases rather than oil or other liquid media has the advantages of reducing the risks concerning health and environment, while simultaneously homogenizing the quenching results and minimizing distortion due to a wide range of possible process parameter variations and the pure convective heat transfer. In this contribution, a coupled solution for increasing homogenization of quenching results within high pressure gas quenching will be presented. In the first stage, an experimental test facility was set up for flow investigations and in the second stage a numerical simulation model was generated. The numerical and experimental results of the flow through the chamber were compared for several boundary conditions. Finally, after complete verification of the simulation, the model may be used to assist in parameter variation for optimization of homogeneous high pressure gas quenching.     

Seismic Physical Modeling Technology and Its Applications

1. Introduction Seismic physical modeling technology is an important method for the research on seismic exploration theory and methods. In seismic physical experiments, the earth, mantle or field site are scaled down to physical models according to the similarity principle, and then the seismic field and its variation are observed in the laboratory for the research work on the theories and methods of the earth structure, earthquake forecasting, energy and mineral resource exploration, and engi…     

A Model for Flooding Prediction in Circular Tubes

Flooding phenomenon limits the stability and the flow of a liquid film falling along the walls of a channel in which a gas is flowing upwards.As known, the entrainment effect can completely prevent the liquid to fall from its natural flow. The present work proposes a new mechanistic model for the prediction of the onset of flooding in vertical and inclined pipes in the presence of obstructions, as well as taking into account the viscosity effect. The good performance of the model in the different geometrical conditions and for variable viscosities of the liquid component assesses the validity of the hypothesis that the instability of a wavelike disturbance limits the countercurrent flow in a channel.