冶金烧结强化盘式钻头齿圈的试验研究

在分析盘式钻头齿圈失效机理的基础上,提出了齿圈表面堆焊耐磨合金强化和镶嵌硬质合金齿圈强化两种方法。通过试验研究和对比分析,确定了采用冶金混合烧结固齿法镶嵌硬质合金齿圈强化盘式钻头。进一步的试验研究表明:采用冶金混合烧结固齿法镶嵌硬质合金齿圈来强化盘式钻头齿圈,其结合情况非常好;硬质合金齿圈的硬度、耐磨料磨损的能力和耐冲击磨料磨损的能力在烧结后都有进一步的提高,说明采用冶金混合烧结固齿法镶嵌硬质合金齿圈来强化盘式钻头齿圈是可行的。     

Evidence for Remote Effects of Dreissenid Mussels on the Amphipod Diporeia: Analysis of Lake Ontario Benthic Surveys, 1972–2003

The status of invasive dreissenid mussels (Dreissena polymorpha and D. bugensis) and native amphipods (Diporeia spp.) in Lake Ontario was assessed in 2003 and compared with historical data. D. polymorpha (zebra mussels) were rarely observed in 2003, having been displaced by D. bugensis (quagga mussels). D. bugensis expanded its depth range from 38 m depth in 1995 to 174 m in 2003 and this dreissenid reached densities averaging 8,000/m² at all sites < 90 m. During the same time period, Diporeia populations almost completely disappeared from 0–90 m depth, continuing a declining trend from 1994–1997 reported in previous studies. The average density of Diporeia in the 30–90 m depth interval decreased from 1,380/m² to 63/m² between 1997 and 2003. Prior to 2003, areas deeper than 90 m represented a refuge for Diporeia, but even these deep populations decreased, with densities declining from 2,181/m2 in 1999 to 545/m2 in 2003. Two common hypotheses for the decline of Diporeia in the Great Lakes are food limitation and a toxin/pathogen associated with dreissenid pseudofeces. The Diporeia decline in deep waters preceded the expansion of D. bugensis to these depths, and suggests that shallow dreissenid populations remotely influence profundal habitats. This pattern of decline is consistent with mechanisms that act from some distance including nearshore dreissenid grazing and downslope transport of pseudofeces.     

Integration of multiple national markets for electricity: The case of Norway and Sweden

During the second part of the 1990s the Nordic (Denmark, Finland, Norway and Sweden) countries have created a unique multinational market for electricity. This paper aims to analyse the degree of integration of the different national markets that constitute the Nordic electricity market. In particular the Norwegian and Swedish wholesale and retail electricity markets are analysed. The results suggest that the wholesale markets are well integrated. Thus prices differ significantly only during periods with unusually high or low supply of hydropower. However, the retail markets are not integrated to the same degree. Thus retail prices and trade margins differ significantly. Differences in the national electricity market legislation seem to be a key factor behind these differences.     

高校实验材料的计算机化管理

主要阐述了高校实验材料实行计算机化管理的必要性及全面介绍了自行开发设计的高校实验材料计算机管理系统．     

挤压六通管及其连接结构的安全性研究

六通管是石油化工设备及压力管道中的重要元件,传统的制作及连接方法是在集流管上开孔,然后将支管插入并焊接而成或采用锻制的方法制成。采用挤压的方法制作六通管,将其与支管对接焊接。并通过试验及数值模拟对该结构的安全性进行了研究,实践证明,这种挤压六通管的强度性能优于普通的焊接六通管,可以广泛应用于工业生产。     

试验模态分析技术的进展

本文对试验模态分析技术的进展,特别是80年代发展起来的有关新技术进行了综合评述。主要内容有:试验激振技术、频响函数估计方法、试验测试设备、以及各种模态识别方法,包括单输入/多输出和多输入/多输出识别的时域和频域方法。文中强调了试验模态分析技术各环节之间的相互联系、相互影响,对于80年代已成为模态识别主流的多输入/多输出各种方法(包括作者发展的几种方法),用统一方法作了描述。最后提出了若干值得进一步研究的方向。     

浅谈我国土建施工企业技术创新体制的建设

分析了我国土建施工企业的现状,研究了加入WTO后我国土建行业面临的形势,详细阐述了加强技术创新、主动应对竞争与挑战的措施,总结了土建施工企业技术创新的特点及发展方向。     

The CADE-14 ATP System Competition

This paper documents the design, competing systems, results, and conclusions of the CADE-14 ATP System Competition (CASC-14).     

Three-Dimensional Solution and Experimental Confirmation for the Electric Resistivity Testing of Surface-Breaking Defects in Green-State Powder Metallurgy Compacts

This paper investigates electrostatic voltage distributions around a surface-breaking flaw due to an injected current of known strength. The direct 3-D solution of the voltage behavior over the flawed surface is obtained numerically by the use of a boundary integral formulation. A novel iteration method is applied to solve the resulting electrostatic integral equation for the unknown surface voltage distribution. In addition to investigating the sensitivity of different flaw sizes to the observed surface voltage distribution, important issues such as suitable probe spacing and current flow orientation are studied. For sufficiently small surface-breaking flaws, a simple image source model is developed to evaluate the voltage response of hairline cracks. The model is tested by comparing it with the developed numerical solution. Experiments aimed at establishing the validity of the modeling approach show remarkable agreement with the theoretical model.     

气体动压轴承动态参数测定原理

将气体动压轴压简化为转化气膜系统后，针对其动力特点，给出气膜在微幅振动下动压轴承的实用数学模型和测定动态参数的方法，并进行了测量误差的修正。