碱土金属在萃取剂与树脂间反应平衡常数的测定

研究了碱土金属离子在Ｄ００１树脂与８－羟基喹啉三氯甲烷溶液间的平衡常数Ｏ－ｔＫ的测定。其值依Ｍｇ、Ｃａ、Ｓｒ、Ｂａ次序减小。并得出萃取剂浓度［ＨＡ］。与金属离子在两相分配的关系。     

汽轮发电机组负荷波动的原因分析及解决措施

详细分析了汽轮发电机组在运行过程中出现电负荷波动和瞬间突降的原因，重点介绍了如何调节、维持汽轮发电机组的经济运行以及解决电负荷波动的措施，从而保证汽轮发电机组的稳定运行。     

超临界流体技术应用研究

超临界流体技术具有许多传统技术所没有的快速，高效，低能耗，污染少等优点，在材料制备，医药工业，生物工程，食物，环境，化工等许多方面展现了广阔的应用前景。综述了其在萃取，材料制备和作为反应介质等方面的应用。     

固相萃取技术在农药残留分析中的应用

固相萃取是一种新型的样品预处理技术，操作简便，节省有机溶剂，易于实现自动化操作，已广泛应用于环境保护、药物检测、食品检验检疫等领域。在农药残留分析中，固相萃取技术的应用还使得提取不同类别农药的选择性增强，样品回收率提高，尤其是结合HPLC—MS、GC-MS、CE-MS等仪器的联合鉴定，可实现自动化分析，能简单、快速、灵敏地提取定量许多物质，从而大大提高了分析效率和精密度，具有广阔的发展前景。     

Effect of sample size on solvent extraction for detecting cocontinuity in polymer blends

The effect of sample size on the results of solvent extraction measurements for detecting cocontinuity in polymer blends was investigated. Poly(ethylene oxide)/polystyrene (PEO/PS) blend samples of several thicknesses were analyzed by removing the PEO phase using water extraction. The experimental degree of continuity was shown to have a linear dependence on the reciprocal of sample thickness. A model is proposed to explain this dependence and to allow the bulk or true degree of continuity to be determined. Measurement of the bulk degree of continuity is useful for understanding properties of cocontinuous polymer blends such as electrical conductivity, impact strength, or tensile strength.     

Cycling hardening and serration yielding of Fe-Ni-Cr alloy at high temperature under out-phase TMF

Behaviour of hardening and serration yield of a Fe-Ni-Cr alloy under isothermal cycling (ISC) and out-phase TMF was studied on the basis of varied hysteresis loops. Cycling hardening and serrated yielding for ISC depend on the temperature and the total strain range, stronger hardening with serrated yielding at higher strain range under ISC at 600 °C, but no hardening and serrated yielding occurred under ISC at 800 °C. Stronger hardening with stress serration occurred at the thermal path going to the lowest temperature, no stress serration occurred at the highest temperature under the out-phase. The hardening also depends on the total strain range, higher total strain range with lower cycling temperature resulted in a stronger hardening and remarkable serration yielding behavior. Weaker hardening without serrated yielding occurred at near 800 °C may due to an obvious cycling stress drop under out-phase TMF. Change in the shape of the hysteresis loops also expresses the degree of the damage of the tested alloy under out-phase and ISC.     

一种适应光照多变的夜间前景提取方法

夜间前景提取是智能监控的必要处理过程,也是新时代下店铺防盗的高效手段。提出了一种在强弱光多变下具有检测鲁棒性的动态目标自动提取算法。在亮度通道上利用直方图均衡技术根据设置参数自适应灰度增幅,结合Canny边缘图像进行差分处理,最后给出前景提取算法。实验结果表明:在强弱光不同光照环境下,该方法可以很好的削弱不同光照对前景提取带来的多噪声、过度曝光等影响,提高前景对比度,相比其他方法,显示效果清晰完整,并满足实时性要求。     

非平稳时序循环平稳趋势提取与机械故障诊断

在简单介绍非平稳时序模型周期趋势项提取方法的基础上，提出了机械故障诊断和分析方法，该方法利用旋转机械出现故障以后所呈现的循环平稳特性，使用循环平稳分析方法剔除非平稳时间序列模型中的趋势项，然后建立平稳时序模型，用该模型进行机械故障诊断分析。并运用仿真和实例对方法的正确性进行了验证。     

金属材料屈服强度的应变率效应和热激活理论

对４种金属材料进行了应变率为１０＾－４－１０＾３ｓ＾－１的拉伸试验，结果表明，屈服中度随应变率的升高分两阶段线性升高，提出了位错线热振动对加载频率的响应的热激活作用机理，依据该机理计算所得Ⅰ，Ⅱ区临界应变εｃ与实测值相符，并在此基础上将应变率对掘强度影响的机制图重新划分为：Ｉ区，富热激活区；Ⅱ区，贫热激活区。