低发射率材料红外法向发射率谱测量方法的研究

采用热管技术研制了材料发射率谱的专用测量附件;利用双温测量技术,在P-E983型红外分光光度计及3600型数据站上进行了较低温度下低发射率材料红外法向发射率谱测量方法的研究.实测了几种材料的发射率谱;讨论了影响测量误差的诸因素.     

Linked influence of pH and cations on fatty-acid monolayer integrity related to high-quality Langmuir-Blodgett films

This study shows the connection between the morphological structure of transferred films and the chemical composition of the monolayer before transfer. The stability of a behenic acid monolayer depends on the linked influence of the type of cation and of the pH value in the aqueous subphase. The stability of the monolayer is assessed by the expansion of the solid-packed state and by the relaxation time. Its integrity is characterized by the number of crystal defects which appear in transferred Langmuir-Blodgett (LB) films as seen through Nomarski microscope observations. Both stability and integrity are greatly improved when Cd²⁺ or Mn²⁺are added to the subphase at pH 5.75 and 6 respectively. In these conditions, the transfer is very efficient and the LB films thus obtained are of very high quality. The pH values of the subphase at which the molecules of behenic acid are transformed into bivalent salts differ significantly according to the nature of the cation involved. Comparing infrared spectra of the LB films, it appeared that the relative amount of acid/salt found in the monolayer was practically the same with a subphase containing either Cd²⁺ at pH 5.75 or Mn²⁺ at pH 6. This suggests that the ratio of acidic and salt forms would be a key parameter for obtaining high-quality LB films.     

Use of pyrogenic silicas for petroleum oil polar fraction characterisation. Fourier transform infrared spectroscopy and microelectrophoresis studies

In the power transformer, the presence of polar or charged species in the insulating oil can cause failure and electric discharges. Solid substrates such as silica can be used to extract the polar species and to refine the oil in order to prevent future failure in the power transformer. However, the use of silica for petroleum oil separation and refining will depend on the silica characteristics such as surface charge, surface composition, specific surface area and particle size.Various pyrogenic silicas having various specific surface areas (49-200 m² g⁻¹) and particle sizes (207-500 nm) were used to extract the polar fractions from the neat transformer insulating oils (a new, NO, and used, UO2, oils). The oil covered silica samples were investigated by diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy in the range 4000-600 cm⁻¹. The bare silica surfaces present two main hydroxyl components, a sharper peak at 3745 cm⁻¹, I₃₇₄₅, due to isolated silanols and a second broad, which spreads over 3745-3000 cm⁻¹, I_3745-3000, due to H-bonded silanols. The relative intensities of the two components, I₃₇₄₅/I_3745-3000, varied for the bare and the oil covered silicas depending on the solid surface characteristics. The adsorption of the NO polar fraction onto silica leads to strong reduction in intensity of the sharper peak in favour of the broad one. However, the adsorption of the UO2 polar fraction onto silica leads in all cases to the decrease in the intensity of the both silica OH components. Further, the UO2 adsorption on the silica leads to the apparition of a broad peak at low frequency in the region 3250-3300 cm⁻¹ which, is due to the associated phenolic groups of UO2 oil polar fraction. The analysis of the DRIFT spectra for various samples indicates that the oil polar fraction resembles to asphaltenes compounds.The microelectrophoresis method used to investigate the surface charge at the water/oil polar fraction covered silica interface, indicates negatively charged particles. Further, the negative charge increased with the pH, as resulting from the increase of the ionisation and/or the amount of the oil polar carboxylic and phenolic groups. The oil polar fraction, i.e. the asphaltene components, in contact with both the silica surface and water at high pH values rearrange, due to their amphiphilic character.Finally, the use of the silica substrates seems to be suited to extract and analyse polar species present in petroleum oil. A correlation is found between the nature of the oil, its functionalities, and the magnitude of its zeta potential value at the water/oil covered silica interface.     

Instability of zeolite Y supported cobalt sulfide hydrotreating catalysts in the absence of H2S

Ion exchanged CoNaY was sulfided at 473 and 673 K and subsequently heated in He at 673 and 773 K. The resulting samples were characterized by means of overall sulfur analysis, temperature programmed Ar treatment and Fourier transform infrared spectroscopy. It was shown that during He flushing at sufficiently high temperature a protolysis reaction occurs resulting in the decomposition of Co sulfide into Co²⁺ ions and H₂S.     

Modified Imidazoles: Degradation Inhibitors and Adhesion Promoters for Polyimide Films on Copper Substrates

Polyimide films on copper substrates that are exposed to elevated temperatures and an oxidizing environment will be subject to degradation. In order to halt this degradation without changing the properties of the system, a polymeric agent could be placed between the polyimide and the copper. This paper will investigate three such materials that will not only slow down the degradation of the polyimide and the oxidation of the copper, but will also improve adhesion within the system. Fourier transform infrared reflection-absorption spectroscopy (FTIR-RAS) will be used to investigate the polyimide/polymeric agent/copper system.     

TiO_2载体表面酸性的研究

利用NH_3吸附和吡啶吸附红外技术研究TiO_2的制备条件对其表面酸性的影响。结果表明,用NH_3水中和TiCl_4溶液方法制备的TiO_2(A)表面有较强的L酸中心,中和条件对表面酸性中心数目和强度有显著影响。由TiOSO_4水解方法制备的TiO_2(B)表面具有较强的L酸中心和较弱的B酸中心,引入不同添加剂可有效地调变TiO_2载体表面的酸性。     

高灵敏度热释电摄象管红外电视系统

针对热释电摄象管(PEV)在传统的对称斩波模式下存在的各种问题,设计了一种新的非对称斩波模式PEV红外电视系统.通过提高PEV摄象机的温度响应率R_i和采用高去噪声信号处理系统,大大改善了PEV红外成象系统的性能.     

Modeling and simulation of the drying of thin sheets in a continuous infrared dryer

The model gives the temperature and moisture distributions of the air, and of the moist sheet, as a function of time and distance in the dryer. The influence of the sheet's velocity and that of the radiant energy on the dryer performance as well as the effect of the moisture content of the entering sheet have been studied. A set of 27 experiments was carried out using the infrared dryer in order to calibrate the model. In these, the following three variables each had three operational levels: web velocity, initial web moisture and heating power. The model predictions agreed very well with the experimental data. Model predictions using arithmetic averages for the parameters, and parameters correlated with operational variables, are also presented and discussed.     

近红外仿灸仪的研制与临床应用

近红外仿灸仪,也称为经络灸疗仪,是采用我国传统医学与现代科学技术相结合而研制成的一种新型中医治疗、保健仪器,可以用于治疗多种疾病。本仪器根据艾灸燃烧时所辐射的光谱,运用仿真技术进行模拟,根除了传统灸法燃烧缓慢、效率不高、烟雾较大、刺鼻熏眼、易于灼伤、操作不便等缺点,充分发挥了我国传统灸法的温经通络、补气活血、化瘀消肿,祛湿止痛的功效。     

IR Radiometry Optical System View Factor and Its Application to Emissivity Investigations of Solid and Liquid Phases

An optical system for fast IR radiometry designed for investigations of thin film thermal properties and pulsed laser melting was analyzed in this work. A methodology for determination of the view factor from calibration measurements was developed. The view factor (0.0255) of the optical system containing two paraboloid mirrors was determined experimentally from calibration measurements on pure metals and metallic alloys. The knowledge of the view factor was then applied to normal emissivity investigations at IR wavelengths. The emissivity of tungsten films prepared by magnetron sputtering was determined for different deposition conditions, varying between 0.036 and 0.071. Liquid phase emissivities of Cu, Mo, Ni, Si, Sn, Ti, and steel were also determined and were found to be higher than solid-state emissivities as predicted from the literature. A knowledge of the liquid-state emissivity of silicon enabled recalculation of the IR signal evolution to the temperature evolution, during and after a nanosecond laser pulse. This was not possible by use of the usual calibration because of silicon’s semi-transparent behavior in the IR range (1–10 μm) in the solid-state phase.