钠冷快堆中喷雾钠火的计算分析

根据钠冷快堆中喷雾钠火的特点建立了理论模型，编制了SSPRAY程序。该程序模拟钠喷雾燃料过程中钠滴的运动、钠和氧气的燃烧反应、热量传递和质量传递等瞬态过程。用该程序计算了气体和墙壁温度、气体压力、氧气摩尔份额、喷雾流燃烧速率和热量热递速率等主要参数。利用AI实验数据和美国SPRAY－3A的计算结果对程序进行了验证，结果符合较好。     

气体绝缘封闭电器的高速瞬变过程和现场试验

随着ＧＩＳ的工作电压不断提高和发展，一系列新的现象和问题也同时出现。从国外一些科研，设计，制造部门所研究发表的内容看，大致有隔离开关操作和高速瞬变过程，粒子影响和对干扰定位的技术，元件的监督，现场试验等课题，本文对以上问题加以综合介绍。     

碳纳米管及其批量制备研究进展

从碳纳米管的优异性能和应用出发,综述了碳纳米管的制备方法以及我国目前在碳纳米管研究中面临的问题;分析了碳纳米管产业化对的我国纳米技术产业化发展的积极意义,特别介绍了清华-南风纳米粉体产业化工程中心开发的、具有我国自主知识产权的纳米聚团流态化技术。     

龙滩碾压混凝土重力坝快速施工技术

连续、高强度、快速施工既是碾压混凝土坝的施工特点,也是层间结合质量的根本保证。龙滩水电站碾压混凝土浇筑采用了合理的入仓手段和机械设备配置,通过配套的碾压混凝土施工技术的应用和健全的管理体系,有效地提高了碾压混凝土施工强度,保证了施工进度和施工质量。     

Coexisting static and flowing regions in a centrifuging granular heap

We report an unexpectedly rich variety of new flow patterns on a granular heap that is centrifuged so as to simulate a reduction in gravity. These surface patterns exhibit coexisting static and flowing regions that depend strongly on centrifugal stress, but surprisingly not on mass flow rate. A discrete cellular automata model reproduces some of the patterning features and indicates that subsurface jamming may precipitate the formation of localized frozen patterns on the surface. This model provides insights into the mechanics of granular flows under controlled stress environment and jammed-to-flowing transitions in granular media.     

江苏省县级电力信息网的3种组网方案

对江苏省县级电力信息网工程采用的利用ATM设备、SDH设备和WDM设备的3种组网方案进行了阐述，并分析了各种方案的优缺点。     

脉冲波形对流化床性能的影响

本文从理论上分析了矩形波和正弦脉波气流对流化床操作性能的影响，发现矩形波在一定条件下优于正弦波的规律，并用实际进行了验证。     

Oxygen-enrichment of YBa2Cu3 YBa2Cu3O7-δ using the fluidization techniqueusing the fluidization technique

The oxygen-deficient phase of the highT _c superconductor, YBa₂Cu₃O₇, was oxygen-enriched using the fluidization technique to give good superconducting properties. The normal method of oxygen treatment at 900°C for 24 h and at 600°C for 24 h has been reduced to just one treatment at 600°C for 12 h by the fluidization technique to achieve almost the same strength of superconducting signal for the YBa₂Cu₃O₇ powder, which establishes the attractiveness of the latter route for the large-scale preparation of superconducting material. The particle sizes were in the range 0–90, 90–180 and 180–420 μm. The fluidized particles were crystalline with orthorhombic distortion.T _c ^onset , estimated using the a.c. magnetic susceptibility method, was 91·3 K. The volume fraction of superconducting material in the product was 83·7–85·3%, one of the highest values reported so far for YBa₂Cu₃O₇.     

非平稳信号的快速傅里叶变换与小波分析的比较

在对通信系统信号进行分析时,非平稳信号是经常遇到的。采用快速傅里叶变换和小波变换对通信系统信号进行分析,比较了分析结果,证明小波分析更适合于突发信号的分析。最后给出了Matlab实验结果。     

轴快流CO2激光器气体压力控制

激光切割对激光功率模式、功率密度和功率稳定性要求很高,采用轴快流CO2激光器时,控制工作气体压力工作在最佳状态并保持其恒定是激光器输出连续、稳定功率的必要条件和关键技术之一。在深入研究激光器工作原理和影响激光输出功率因素的基础上,采用带积分分离的智能PID控制算法对工作气体压力进行调节。该过程控制算法简单实用,可以有效地提高气体压力控制精度,改善功率控制精度和稳定性,并用实验加以验证。