八羰基二钴的合成

本文考察了反应起始原料、催化剂及其加入量、溶剂和压力对八羰基二钴合成的影响，得出了最佳的合成条件．     

PET短纤维后纺上油衡算方程及上油形式的评价

建立了合成纤维湿热和高温上油模型及其衡算方程。该方程可用于设计参考和指导工业生产。评价了合成纤维常规上油形式的技术性和经济性,指出选择合理的上油形式,可降低油剂消耗,提高装置的经济效益。     

阻燃聚酯纤维生产技术

主要介绍了聚酯用阻燃剂的种类、特点 ,阻燃聚酯纤维的生产方法 ,并归纳了国内外主要生产厂家 (公司 )的阻燃聚酯纤维生产工艺特点。概述了目前我国及西欧地区的阻燃法规和标准 ,并对我国阻燃聚酯纤维的发展提出了建议。     

美国卓尔泰克(ZOLTEK)公司炭纤维的发展

介绍美国卓尔泰克公司炭纤维的现状与进展，包括卓尔泰克公司的发展战略、新产品的PANEX 35炭纤维系列和大丝束炭纤维的优点与应用领域等。     

窑尾废气处理系统"双风机"与"三风机"技术方案的浅析

摘要：理系统主要分为双风机系统与三风机系统。以5000t／d熟料生产线为例，详细介绍了双风机系统和三风机系统的工艺流程、风机配置；分别介绍了系统的风机配置情况：从工艺布置、生产操作、设备运行、投资大小及运行电耗等多角度，重点进行二种系统的对比分析。在此介绍-分析-对比的基础，作者对原料粉磨和废气处理系统提出了几点看法。     

Aqueous heterophase polymerization of styrene—a study by means of multi-angle laser light scattering

An online multi-angle laser light scattering study of ab initio surfactant-free styrene emulsion polymerization reveals unexpected results regarding the development of the dispersity during the whole reaction starting from mixing styrene and water at reaction temperature. The experimentally observed change in the dispersity, which is an indirect measure of the average characteristic size of the colloidal objects, allows the identification of three characteristic intervals. During interval A the equilibration of styrene in water is characterized by the formation of styrene domains, which increase in number and size until an equilibrium state is reached. This means that there is virtually no homogeneous/molecular styrene in water solution but rather nanodroplets of about 200 nm in diameter (assuming spherical shape) are formed. During interval B, after initiation of the polymerization and particle formation, the dispersity increases again as the average size decreases and the number of scattering objects increases. The polymer particles suck up the monomer from the monomer nanodroplets, which leads to the disappearance of the nanodroplets and to a decrease in the average size. During interval C the average size increases again due to the predominantly growth of the polystyrene particles.     

UHMWPE纤维/LDPE复合材料防弹性能及机理研究

本文探讨了用超高分子量聚乙烯（UHMWPE）纤维增强低密度聚乙烯（LDPE）复合材料的防弹性能，研究了不同基体含量对复合材料防弹性能的影响。实验证明，UHMWPE纤维／LDPE复合材料具有较好的防弹性能，其最佳的基体含量在26％左右。同时，本文还通过分析防弹片材的断裂区域及复合材料的防弹机理确定了弹丸的变形情况和靶片“背凸”在防弹作用中的贡献。     

电除尘器绝缘子的设计与选择

根据电除尘器绝缘子的功能及工况条件，介绍了材质和结构形式的选择。对于电除尘器绝缘子材质的选择，首先要考虑承受运行电压的能力，其次是耐温性能和机械强度。对于结构形式的选择，应考虑有足够的厚度以耐电力冲击、足够大的爬电距离以防漏电或对地闪络、足够大的空间以防出现电晕或空间闪络。另外，介绍了高铝瓷绝缘子的成功应用及其优点。     

磁性塑料卷材的研制与应用

磁性塑料卷材由ＣＰＥ树脂、助剂以及磁粉、经塑炼、压延成型的一种柔性薄 强磁性材料。为使大量磁粉（约９０Ｗｔ％－９２Ｗｔ％）能均匀分散在少量树脂（约６Ｗｔ％－７Ｗｔ％）中，必须对磁粉的分散性及其颗粒形状等方面进行研究。     

Thermal strain of high strength polyethylene fiber in low temperature

High strength polyethylene fiber (Toyobo, Dyneema® fiber: hereinafter abbreviated to DF) has a negative thermal expansion coefficient. Relation between fiber structure and thermal strain of DF used as reinforcement of DF reinforced plastic (DFRP) for cryogenic use was investigated. The crystallinities and orientation angles of several kinds of polyethylene fibers having different modulus from 15 to 134Gpa (herein after abbreviated to DFs) were measured by NMR and X‐ray. We obtained the parameters of the mechanical series‐parallel model composed of crystal and amorphous by crystallinity and modulus. Thermal expansion coefficients of DFs were estimated by mechanical series‐parallel model. All DFs having different modulus showed negative thermal expansion coefficients in the temperature range from 180 to 300K, and absolute values of those markedly increased by increasing tensile modulus of DF. The estimated thermal expansion coefficients showed negative values, and thermal strains showed a similar curve to observed ones mostly. Average thermal expansion coefficients in the temperature range from 180 to 300K estimated by mechanical model agreed with the observed ones. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2918–2925, 2004