火焰原子吸收光谱法测定苋菜中8种矿物元素

用空气-乙炔火焰原子吸收光谱法对苋菜中钾、钙、镁、铁、锌、铜、锰、铅8种矿物元素进行了测定,对样品前处理方法、酸度、共存元素干扰及元素线性范围进行了实验。在选定的实验条件下,可以用火焰原子吸收光谱法对苋菜中8种元素进行分别测定,互不干扰。方法的相对标准偏差为0.08%~3.17%(n=5),加标回收率为91.5%~102%。     

膨胀型防火涂料的研究

介绍了膨胀型防火涂料的防火机理、组成、特点以及发展趋势。     

110 dtex/36f抗菌POY纺丝工艺研究

讨论了干燥温度、纺丝温度、冷却成形条件等对纺丝的影响。指出预结晶温度为160℃,干燥温度为145℃时,干燥效果较好。螺杆各区温度比常规纺丝时低10℃,纺丝顺利。侧吹风速0.37m/s,风温25℃,风湿75%,丝条稳定;上油率达0.9%时,集束性较好。此抗菌纤维抑菌率达99.99%以上。     

Different effects of tri(acryloyloxyethyl) phosphate on the thermal degradation of photopolymerized epoxy acrylate and polyurethane acrylate films

Tri(acryloyloxyethyl) phosphate (TAEP) was blended in different ratios with epoxy acrylate EB600 and polyurethane acrylate EB270 to obtain a series of UV curable flame retardant resins. The thermal degradation mechanisms of their cured films in air were studied by thermogravimetric analysis, in situ Fourier‐transform infrared spectroscopy, and direct pyrolysis/mass spectrometry measurements. The results showed that the phosphate group in TAEP first degraded to form poly(phosphoric acid) before the degradation of EB600. Then, the formed poly(phosphoric acid) effectively promoted the conversion of EB600 to form char, which prevented the sample from further burning. However, urethane group in EB270 degraded simultaneously with phosphate group in TAEP, leading to not effectively increase the conversion of EB270 to char during the thermal degradation. It was thus found that the addition of TAEP more effectively improved the thermal stability, flame retardance, and the char yield during combustion of EB600 than those of EB270. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3130–3137, 2006     

防火涂料的防火性能及其测量

本文依据有关国家标准对饰面型防火涂料和钢结构防火涂料的防火性能及其检测方法作了简要介绍。     

Thermal degradation behaviors of polypropylene with novel silicon‐containing intumescent flame retardant

The N‐[3‐(dimethoxy‐methyl‐silanyl)‐propyl]‐N′‐ (9‐methyl‐3,9‐dioxo‐2,4,8,10‐tetraoxa‐3,9‐diphospha‐spiro[5.5]undec‐3‐yl)‐ethane‐1,2‐diamine/dimethoxy dimethyl silane copolymer (PSiN II), which simultaneously contains silicon, phosphorus, and nitrogen, is synthesized and incorporated into polypropylene (PP). The flame retardancy is evaluated by the limiting oxygen index value, which is enhanced to 29.5 from 17.4 with 20% total loading of PSiN II. The thermal degradation behavior of PP/PSiN II is investigated by thermogravimetric analysis under N₂ and air. The PP/PSiN II sample degrades at 400°C for different amounts of time, and the process of degradation is studied by Fourier transform IR. The morphology of the char formed at 400°C for 10 min is investigated by scanning electron microscopy. The swollen inner structure, close, and smooth outer surface provide a much better barrier for the transfer of heat and mass during fire and good flame retardancy. The thermal stability of PP is improved by incorporation of PSiN II. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2487–2492, 2005     

阻燃硅橡胶的研制

通过测定硅橡胶试片的离火熄灭时间及燃烧速率来判定热硫化硅橡胶的阻燃性。结果表明，氢氧化铝对热硫化硅橡胶具有良好的阻燃效果；随着氢氧化铝用量的增加，硅橡胶的物理机械性能下降。通过对氢氧化铝进行表面处理，并与氯铂酸等阻燃剂配合，可制得符合美国UL-94V-0阻燃标准的硅橡胶制品。在本实验条件下的最佳配比为：100份混炼硅橡胶，45份氢氧化铝，50份氯铂酸(以铂质量计／10^-6)，2份乙炔炭黑及铁锡复合氧化物，制品拉伸强度大于5MPa。     

聚酰胺66的复配阻燃研究

采用35％磷-溴-锑复配阻燃体系对聚酰胺66进行阻燃，极限氧指数可提高到33．6％，达到UL94-V0级(1．6mm)，且无熔融滴落。阻燃体系的添加会导致聚酰胺66力学性能的下降，但与无机阻燃体系相比较，磷-溴-锑复配阻燃体系对聚酰胺66的力学性能影响较小。采用扫描电镜观察阻燃剂在聚酰胺66中的分散效果，发现分散均匀的体系，在水中或者在110℃的析出实验条件下，阻燃剂的析出量很小，可以维持较长时间的阻燃效果。     

全自动机器人在涤纶长丝生产中的应用

"机器换人"是荣盛石化股份有限公司在化纤生产中的一次设备革新,也是将传统生产逐步过渡到智能化生产的一次大胆尝试。介绍了从德国引进的高端工业自动化落丝包装一体化设备,通过全自动机器人的运用,实现从落丝—输送—检测—中间立体仓储—包装等全自动一体化功能,帮助企业提高了自动化程度,节省了人工成本,提高了生产效益。     

Conductive Papers Containing Metallized Polyester Fibers for Electromagnetic Interference Shielding

Conductive papers were developed for preventing or reducing electromagnetic interference (EMI), and their shielding efficiency was evaluated. This type of conductive paper consists of wood pulp, synthetic pulp and metallized polyester fibers (0.5–2.0 mm long and 14 m in diameter) whose surfaces are coated with nickel alone (Ni-PET) or copper and nickel double layers (Ni-Cu-PET) by electroless plating. In this report, the effect of the characteristics of these metallized fibers, such as their conductivity, geometry and the concentration of fibers in paper, which lead to high efficiency for shielding effectiveness is discussed. For instance, one of the conductive papers (80 g/m2) which was prepared by mixing 40% Ni-Cu-PET and 60% synthetic polyethylene pulp showed over 40 dB shielding effectiveness between 10 MHz and 1 GHz.