An efficient heuristic for scheduling batches of parts in a flexible flow system

Flexible manufacturing systems (FMSs) are a class of automated systems that can be used to improve productivity in batch manufacturing. Four stages of decision making have been defined for an FMS—the design, planning, scheduling, and control stages. This research focuses on the planning stage, and specifically in the area of scheduling batches of parts through the system.The literature to date on the FMS planning stage has mostly focused on the machine grouping, tool loading, and parttype selection problems. Our research carries the literature a step further by addressing the problem of scheduling batches of parts. Due to the use of serial-access material-handling systems in many FMSs, the batch-scheduling problem is modeled for a flexible flow system (FFS). This model explicitly accounts for setup times between batches that are dependent on their processing sequence.A heuristic procedure is developed for this batch-scheduling problem—the Maximum Savings (MS) heuristic. The MS heuristic is based upon the savings in time associated with a particular sequence and selecting the one with the maximum savings. It uses a two-phase method, with the savings being calculated in phase I, while a branch-and-bound procedure is employed to seek the best heuristic solution in phase II. Extensive computational results are provided for a wide variety of problems. The results show that the MS heuristic provides good-quality solutions.     

柳海矿运输大巷返修工程深部软岩支护设计研究

通过现场调查、室内试验以及理论分析,柳海矿运输大巷支护现状进行分析研究,总结破坏原因。根据现场工程地质条件、岩石特性和破坏特点,确定软岩变形力学机制为高应力膨胀性软岩,并提出采用预留刚隙柔层支护技术进行支护。     

河道漫滩及湿地上淹没柔性植物水流的紊流特性

植物在河流生态的修复中起重要作用,因此对含植物明渠水流的紊流机理的研究显得非常重要。将河漫滩及湿地中含淹没柔性植物的水流视为充分发展了的紊流,在实验室中用特定材料模拟柔性植物,通过水槽试验用三维ADV对淹没柔性植物段紊流特性进行了测量研究,对试验结果计算分析表明含淹没柔性植物的垂向流速分布不再符合指数分布;其紊流具有明显的各向异性特性;植物冠层交界处,水流紊动交换强烈,该处紊流强度及雷诺应力出现最大值。     

软启动器在深井泵电动机上的应用

论述了几种三相交流异步电动机的起动方式及其优缺点 ,介绍了新型的电子软启动方式在我厂深井泵电动机上的应用及取得的运行效果 ,为电动机软启动方式在工矿企业中的应用提供了应用经验。     

Evaluating the design of flexible manufacturing systems

Evaluating the design of flexible manufacturing systems is complex. Developing a measure of performance useful for evaluating alternate designs continues to be interesting. Here, total productivity of the system is proposed as an appropriate measure. Specification of parameters based upon strategic considerations for this measure are discussed. Finally, the usefulness of the measure is demonstrated through an example.     

70m3聚合釜粘釜的原因与对策

分析了70m^3聚合釜粘釜的原因，并提出了相应的解决措施：(1)调整水与单体的入料总量，适当提高水油比；(2)根据季节的变化，合理使用不同品种与数量的引发剂；(3)提高去离子水初始温度，缩短升温时间；(4)采用防粘釜性能好的涂布剂“欧洲黄”，加强清釜后的底涂操作。     

Real-world extensions to scheduling algorithms based on lagrangian relaxation

Recently, efficient scheduling algorithms based on Lagrangian relaxation have been proposed for scheduling parallel machine systems and job shops. In this article, we develop real-world extensions to these scheduling methods. In the first part of the paper, we consider the problem of scheduling single operation jobs on parallel identical machines and extend the methodology to handle multiple classes of jobs, taking into account setup times and setup costs. The proposed methodology uses Lagrangian relaxation and simulated annealing in a hybrid framework. In the second part of the paper, we consider a Lagrangian relaxation based method for scheduling job shops and extend it to obtain a scheduling methodology for a real-world flexible manufacturing system with centralized material handling. This research was supported in part by the Office of Naval Research and the Department of Science and Technology grant N00014-93-1017.     

Morphological and kinetics study of PEO/PVC blends

The kinetics of spherulite radial growth and the morphology of the compatible system PEO/PVC have been studied by optical microscopy. The usual spherulite radial growth behaviour has been found for compatible blends with PEO content higher than 70%. For lower composition, distortion of the usual spherulite morphology has been observed; the anomalies have been attributed to partial miscibility of the components.     

挠性抗回旋PDC钻头的有限元分析

回旋是导致PDC钻头早期失效的主要原因，介绍了一种基于挠性钻头的构想设计的抗回旋PDC钻头，阐述了其结构和抗回旋原理。对挠性钻头的公、母接头进行了有限元应力分析，说明了模型建立、网格划分以及约束和载荷施加过程中所采用的方法和关键技术。有限元分析结果表明挠性钻头的强度满足要求。     

柔性植物阻流特性研究

河流中的植物不仅影响河流的泄洪能力而且在生态的修复中起重要作用,因此对含植物明渠水流的阻力特性及紊流特性的研究显得非常重要。将河道中含柔性植物的水流视为充分发展了的紊流,在实验室中用特定材料模拟柔性植物,通过水槽试验用三维ADV对淹没柔性植物段紊流特性进行了测量研究,分析了含淹没柔性植物明渠水流的水力学特性及阻力特性并得出其曼宁糙率n的变化规律。对试验结果分析表明,含淹没柔性植物的垂向流速分布不再符合指数分布;其紊流具有明显的各向异性特性;植物冠层交界处,水流紊动交换强烈,该处紊流强度及雷诺应力出现最大值。