膨胀石墨对各种油类的吸附动力学

通过对吸附率(有效吸附系数)Ks和饱和吸附量msat的测量,描述了粘度为0.001 Pa·s～0.850 Pa·s的各种油类在膨胀石墨柱中的吸附动力学,发现吸附率Ks对油类粘度有很强的相关性.吸入膨胀石墨柱中的饱和吸附量msat几乎恒定在50kg/kg,该值略低于由膨胀石墨块直接浸渍在油中测得的吸附容量,这是由于所吸附的油沿膨胀石墨柱高度存在重力梯度.     

多量程数据采集记录装置的设计

通常的数据采集与记录装置不易实现多量程测量。通过对标度方程进行分析得知,要改变量程只须改变两个参数——标度因子和量程下限。我们设计了一个使用单片机的多量程数据采集和记录装置,能处理多达256种量程。本文叙述了算法分析、硬件和软件的设计以及该装置的性能指标。     

Tearing, folding and deformation of a carbon-carbon sp-bonded network

A monolayer and a few layers of carbon sp²-bonded networks were torn and folded by the tip of an atomic force microscope at the steps on newly cleaved highly oriented pyrolytic graphite. It was found that the preferential breaking directions and folding axes are along the symmetry directions of the graphite hexagonal structure. Depending on the force exerted by the tip, breaking may occur along other directions. The torn part of the graphene sheet can even be stretched and deformed, and does not resume its original shape after release from the tip.     

石墨电极高温抗氧化技术研究现状

概述石墨电极抗氧化技术的研究现状，重点介绍选择抗氧化涂层体系的要求及涂层制备方法，包括包埋浸渗法、化学气相沉积法、等离子喷涂法及溶胶--凝胶法．展望了石墨电极材料高温抗氧化涂层研究的方向．     

伪倾斜柔性掩护支架采煤工作面管理信息系统分析

应用管理信息系统的有关理论，对某急倾斜煤层矿井的141301工作面的生产情况进行了全面分析，并提出了改善工作面管理和提高效率的方向。     

A Simple Quasi-2D Numerical Model of a Thermogage Furnace

A simple quasi-2D model for the temperature distribution in a graphite tube furnace is presented. The model is used to estimate the temperature gradients in the furnace at temperatures above which contact sensors can be used, and to assist in the redesign of the furnace heater element to improve the temperature gradients. The Thermogage graphite tube furnace is commonly used in many NMIs as a blackbody source for radiation thermometer calibration and as a spectral irradiance standard. Although the design is robust, easy to operate and can change temperature rapidly, it is limited by its effective emissivity of typically 99.5–99.8%. At NMIA, the temperature gradient along the tube is assessed using thermocouples up to about 1,500°C, and the blackbody emissivity is calculated from this. However, at higher operating temperatures (up to 2,900°C), it is impractical to measure the gradient, and we propose to numerically model the temperature distributions used to calculate emissivity. In another paper at this conference, the model is used to design an optimized heater tube with improved temperature gradients. In the model presented here, the 2-D temperature distribution is simplified to separate the axial and radial temperature distributions within the heater tube and the surrounding insulation. Literature data for the temperature dependence of the electrical and thermal conductivities of the graphite tube were coupled to models for the thermal conductivity of the felt insulation, particularly including the effects of allowing for a gas mixture in the insulation. Experimental measurements of the temperature profile up to 1,500°C and radial heat fluxes up to 2,200°C were compared to the theoretical predictions of the model and good agreement was obtained.     

桥梁板式橡胶支座局部脱空设计成因分析

经过对支座转角组合进行的分析,在研究柔性高墩墩顶转角位移计算方法的基础上,提出了更加严密的支座转角验算修正公式,得出修正后的转角验算公式易于应用的结论,对于保证板式橡胶支座在使用过程中不脱空有重要的意义。     

空间柔性机械臂三维动力学数值仿真

本文应用ｄ＇Ａｌｅｍｂｅｒｔ－Ｌａｇｒａｎｇｅ原理，对由基座、（ｎ－１）个柔性连杆及端部负载组成，相互用柱铰连接的柔性链式多体系统进行建模；对在空间技术中，具有一刚杆，两柔杆加上刚性负载所组成的三维机械臂系统，采用Ｇｅａｒ算法进行数值仿真。仿真结果比较符合实际，从而在柔性多体系统的数学模型为刚性常微分方程的情况下，为解决其数值仿真问题，特别是三维问题的数值仿真取得了进展。     

柔性机械手系统的动力学方程

本文应用动力学普遍方程,导出了单链柔性机械手系统的动力学方程;并以递推形式分析该方程的求解过程,递推的每一步只须解低维的方程组,因而便于计算.还讨论了多链柔性树状系统动力学方程的求解方案,它与单链柔性机械手系统具有相似性,便于编制程序.     

埕岛油田卫星平台金属软管漏蚀问题的分析和对策

对埕岛油田卫星平台多年来一直存在的金属软管漏蚀问题进行分析,找出了导致金属软管漏蚀的主要原因,提出了相应的防治措施,主要有:在金属软管外部裹附橡胶垫,采用带弯头的减振金属软管,安装时金属软管的曲率半径要大于其最小弯曲半径等。通过采取一系列措施,解决了金属软管的漏蚀问题,达到了预期的效果。