Hydrolysis-resistant polyurethane elastomers synthesized from hydrophobic bio-based polyfarnesene diol

Hydrolytic stability is an essential requirement for polyurethanes (PUs) that are used in highly humid and aqueous environments. In this study, hydrolysis-resistant PU elastomers (PUEs) are synthesized based on hydrophobic bio-based polyfarnesene diol (PFD), which contains unique “bottle brushes” structure (with long branched hydrocarbon side chains). The effect of hard segment (HS) content, ranging from 30 to 50%, on the morphology and properties of PUEs is investigated by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, tensile, water absorption, and contact angle measurements. The results show that there are prominent phase separations in the synthesized PUEs. The PUEs show a three-stage degradation process and two T_g, one is at about −66 °C and the other 61 °C, which are related to the soft segment and HS, respectively. Water contact angles of PUEs increase from 98.6 to 105.2° with the increasing of PFD structural unit fraction. After being immersed in deionized water for 30 days, PUEs show no significant degradation of both tensile strength and elongation at break, and mass changes of all samples are less than 0.5%. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47673.     

Joining of dense Si3N4 ceramics with tape cast Lu-Al-Si-O-N interlayer

Lu-Al-Si-O-N tapes with different thickness were used to join gas pressure sintered Si₃N₄ ceramics. The microstructure of the joints and the influences of the joint thickness and joining temperature on the bonding strength of the as-joined Si₃N₄ ceramics have been investigated. The highest bonding strength about ~ 300 MPa of the joined specimens was achieved by using 450 µm interlayer at 1450 °C. The existence of Si₃N₄ nanowires was beneficial for the improvement of the bonding strength by interweaving the oxynitride glass matrix in the joint region.     

微波场中加热高钛高炉渣的数值模拟

利用微波加热技术在高钛高炉渣内引发裂纹的实验过程中发现炉渣局部区域发生热失控现象.为探寻高钛高炉渣在微波场中产生热失控的原因,使用 FEMAP 和 wave-jω 软件计算了在多模式微波炉中高钛高炉渣及其周围空间内微波场和热三维分布情况,并对比研究了钙钛矿相和普通高炉渣吸收微波的能力.通过计算结果可知几乎所有的微波能都集中在被加热的高钛高炉渣试样中,即微波具有加热高钛渣自身而非周围环境的特点.另外,高钛高炉渣试样中微波场分布不均匀,且分散在炉渣中的钙钛矿相比其他矿物相更易被微波加热.以上 2 因素作用下微波加热高钛高炉渣时局部区域发生热失控现象.     

台车式热处理炉控制系统的升级改造

针对中冶陕压重工设备有限公司热处理车间台车热处理炉改造自控系统方面的存在问题,对原有旧炉控制系统进行改造,改造后热处理炉设备升级、技术改进、效果显著,提高了热处理炉的性能。     

Combined sodium and fluorine promote diopside continuous growth to achieve one-step crystallization in CaO-Al2O3-SiO2-Fe2O3 glass-ceramics

In CaO-Al₂O₃-SiO₂-Fe₂O₃ (CASF) glass-ceramics, a dense silicon and aluminum tetrahedral network barrier layer is formed around the diopside nucleus, which hinders the continuous growth of the crystal. In this work, the continuous growth of the diopside crystals was achieved by introducing sodium and fluorine. A combination of FTIR, XRD, SEM and EDS were used to analyze the evolution mechanism of the precursor glass network structure and the growth process of the diopside. The modification mechanism of sodium and fluorine action on the glassy structure was revealed by ²⁹Si NMR. The results showed that sodium and fluorine can selectively destroy the [SiO₄]/[AlO₄] network structure. The Ca²⁺ diffusion channels formed around diopside, which facilitated the continuous growth of the crystals. The diopside crystals can grow to an expected size, approximately 1 μm, when the value of NBO/T reaches 1.44.     

Ag–Sr doped mesoporous bioactive glass nanoparticles loaded chitosan/gelatin coating for orthopedic implants

In this study, we investigated surface and biological properties of Ag–Sr-doped mesoporous bioactive glass nanoparticle (Ag–Sr MBGN) loaded chitosan/gelatin coatings deposited by electrophoretic deposition (EPD) on 316L stainless steel. The EPD parameters, that is, deposition time, applied voltage, and distance between the electrodes was optimized by the Taguchi design of experiment (DoE) approach. Scanning electron microscopy (SEM) images illustrated the spherical morphology of the synthesized Ag–Sr MBGNs with the mean particle size of 160 ± 20 nm. Energy-dispersive X-ray (EDX) spectroscopy results confirmed the presence of Ag and Sr in the synthesized MBGNs. Optimum EPD parameters determined by DoE approach were 5 g/L of Ag–Sr MBGNs, deposition time of 5 min, and applied voltage of 30 V. SEM images confirmed that the coatings were fairly homogenous. Fourier-transform infrared spectroscopy and EDX results confirmed the presence of chitosan, gelatin, and Ag–Sr MBGNs in the coatings. Chitosan/gelatin/Ag–Sr MBGN composite coatings exhibited suitable wettability for the protein attachment and proliferation of osteoblast cells. The composite coatings exhibited suitable adhesion strength with the substrate. The coatings developed HA crystals upon immersion in simulated body fluid. The results of the turbidity test confirmed that the coatings are antibacterial to the Escherichia coli cells.     

有机硅交联聚合物的分子模拟

由正硅酸乙酯(TEOS)和甲基三乙氧基硅烷(MTEOS)出发,先构建了聚合物的单体模型,再构建单链,最后通过手动建立化学键的方法构建了有机硅树脂交联体系的网络模型,并且验证了该模型的有效性.通过比较选择了适合有机硅交联体系的非键作用力和聚合度,再通过模拟有机硅交联体系的密度与温度的关系图、比体积与温度的关系图预测了有机硅树脂交联体系的玻璃化转变温度(Tg).     

锻钢公司蓄热式加热炉的优化改造

对北满特钢锻钢公司快锻4样台车加热炉在生产中出现的问题进行了分析，并对设备缺陷进行了相应的优化改造，改造后的加热炉达到了满意的效果，提高了生产效率。     

Post‐protection effect of heat‐resistant insulations on timber‐frame members exposed to fire

In lightweight walls and floors, the load‐bearing timber members are protected by cladding on the sides to form a divider between two fire compartments or to provide appropriate fire protection to the load‐bearing members. The spaces between the timber members can be void or filled with insulation materials. Although a huge number of different insulation materials exist, the most commonly used material is mineral wool insulation. The existing design model for glass wool‐insulated timber‐frame constructions, given in European standard 1995‐1‐2, assumes collapse of the glass wool after failure of the cladding. However, a new form of glass wool insulation, suitable for use at high maximum service temperatures, is now available in the market. The charring phase after the cladding's failure is known as the post‐protection phase. The behaviour of the new heat‐resistant glass wool in the post‐protection phase is similar to that of stone wool and considerably better than that of traditional glass wool. The protective properties of stone wool have changed over the last decades. Charring is one of the main parameters needed to calculate the resistance of a structure to fire. Based on experimental investigations, this paper describes the analysis of the effect of the insulation with regard to its ability to protect timber members against charring during the post‐protection phase. Copyright © 2011 John Wiley & Sons, Ltd.     

西钢复吹转炉提高底吹寿命生产实践

西林钢铁公司炼钢总厂通过对底吹工艺制度优化，提高底吹寿命达到13000炉以上，保证复吹转炉的冶金效果，降低生产成本，稳定产品质量。