聚对亚苯基苯并二(噁)唑合成新路线及其制备新技术

为进一步提升聚对亚苯基苯并二噁唑（PBO）材料的性价比并促进其工业化,研究了以4,6-二硝基间苯二酚为原料,先选择还原制得4-氨基-6-硝基间苯二酚盐酸盐,进而与对甲氧羰基苯甲酰氯进行缩环合获得苯并噁唑化合物,再催化加氢合成AB型PBO新单体2-(对甲氧羰基苯基)-5-氨基-6-羟基苯并噁唑（MAB）,最后自缩聚反应制备PBO的新路线和新方法.结果表明：该方法具有原料易得、反应条件缓和、中间体稳定等新技术优势.合成的PBO树脂总收率达64%、特性黏数η>10 dl&#8226;g^-1,新单体MAB的纯度>98%,具有稳定性优异和缩聚基团完全等当比等性质,以及均缩聚时间<20 h和过程易操作等技术特点,均为4,6-二氨基间苯二酚（DAR）共缩聚路线所难以比拟的.其综合经济性优于三氯化苯经DAR共缩聚的工业化路线,有望发展成易于实施PBO产业化的一项新技术.     

含氟乳液纸张表面施胶剂的制备及应用研究

以全氟烷基乙基丙烯酸酯(FEA)、苯乙烯(St)、丙烯酸丁酯(BA)、甲基丙烯酰氧乙基三甲基氯化铵(DAC)为共聚单体,异丙醇为溶剂,偶氮二异丁脒盐酸盐(AIBA)为水溶性引发剂,采用半连续无皂乳液聚合法制备含氟丙烯酸酯无皂乳液。系统研究了该含氟乳液作为表面施胶剂对纸张性能的影响,并通过红外光谱进行了表征,通过接触角和扫描电子显微镜进行了性能测试。结果表明,当m(St)∶m(BA)∶m(FEA)∶m(DAC)=3∶3∶2∶1.2,乳液含氟量达到20%时,纸张的防水防油性较佳,抗张强度提高22.3%,耐折度提高38.2%。     

几种低表面能含硅(氟)涂料的性能

本文制备了几种新型的含硅或氟低表面能防污涂料包括溶剂型有机硅渗透反应型涂料、有机硅改性丙烯酸酯共聚物涂料和含氟共聚物低表面能涂料,从低表面能防污涂料的原理出发探讨了建材经含有机硅、氟溶剂型有机涂料的防水抗沾污能力的影响要素,研究了有机硅氟本身结构、含量、催化交联剂等对各种涂料的水接触角、吸水率、耐污染性等表面性能特别是后两者成膜共聚物的影响。结果表明,同时含有硅氟元素的共聚物由于有机硅基团中含可交联反应的基团和有机氟基团的更低的表面能而具有较高力学强度如铅笔硬度、粘接力、耐磨性和耐洗刷性及良好的防水抗污能力。     

单体浇铸尼龙的增韧改性研究

以氢氧化钠为催化剂,N-乙酰基己内酰胺为活化剂,在绝热条件下用己内酰胺与十二内酰胺活化阴离子共聚制得改性单体浇铸尼龙共聚体。偏光显微镜观察发现：共聚导致制品无定形区域增多,限制了球晶的生长。测试表明：制品的机械性能与十二内酰胺单体的用量有关,随着十二内酰胺含量的增加制品的缺口冲击强度增强,韧性也得到显著改善。     

一种油溶性稠油降粘剂的室内研制

以丙烯酸十八酯、苯乙烯、醋酸乙烯酯、丙烯酰胺、马来酸酐为单体,通过调节单体比,合成了几种油溶性多元聚合物。对河南油田的稠油油样的降粘效果进行对比,确定了以丙烯酸十八酯、苯乙烯、醋酸乙烯酯、丙烯酰胺、马来酸酐的单体比分别为4：1：3：0：0和8：8：0：3：0,合成的共聚物对河南油田稠油有很好的降粘效果,同时测定了加量、增加温度、脱水方式对降粘效果的影响,得到了一种对河南油田经过不同脱水方式的油样均有很好降粘效果的降粘剂。     

高性能有机氟材料制备科学及应用进展

有机氟材料具有优异的热氧稳定性、耐化学腐蚀性、耐老化性、不黏性、电绝缘性以及极小的摩擦系数等特性,因此作为一种不可替代的材料广泛应用于高新技术产业。近年来高新技术产业发展对高性能有机氟材料的需求引发了学术界和工业界对氟材料的研究兴趣。依据本文作者的研究经历及有机氟材料的发展方向,本文介绍了氟树脂（新型含氟聚合物、电活性含氟聚合物、新型全氟磺酸聚合物、聚四氟乙烯3D打印）及氟橡胶（过氧化物硫化氟橡胶、耐低温氟醚橡胶、耐高温全氟醚橡胶、全氟聚醚基类玻璃橡胶）的制备科学及应用进展,特别阐述为了满足航空航天、能源、信息等高新技术产业需求发展的新一代高性能有机氟材料。本文也介绍了近期出现的聚四氟乙烯新成型技术及类玻璃氟橡胶。文章指出发展绿色环保和高效的高性能有机氟材料制备及成型加工方法是今后的发展方向。     

自交联水性聚氨酯-含氟丙烯酸酯乳液的制备及研究

以异佛尔酮二异氰酸酯(IPDI)、聚碳酸酯二醇(PCDL)、二羟甲基丁酸(DMBA)、1,4-丁二醇(BDO)、甲基丙烯酸羟乙酯(HEMA)为原料合成了双键封端的聚氨酯预聚体;以N-羟乙基丙烯酰胺(HEAA)作交联剂,配合甲基丙烯酸六氟丁酯(HFBMA)等单体进行乳液共聚,制备了自交联水性聚氨酯-含氟丙烯酸酯(FPUA)乳液。研究了HFBMA和HEAA用量对膜耐水性、热性能以及力学性能的影响。结果表明:PUA乳液的耐水性和疏水性随HFBMA用量的增加而增加;随着HEAA用量增加,胶膜的热稳定性增加,拉伸强度增加,伸长率下降;当胶膜中HFBMA质量分数为12%,且HEAA质量分数为2.6%时,乳液的粒径为128 nm,乳液的稳定性较好;胶膜的水接触角为107.6°,吸水率为4.5%,拉伸强度为25.6 MPa,断裂伸长率为268%,10%热失重温度299.6℃。     

Cross‐Linked Fluorinated Poly(Aryl Ether) (C‐FPAE) Films: Preparation Strategy,Performance Study,and Low Dielectric Applications

The production of low dielectric materials that can be used in high temperature environments is the primary aim of this work. A cross‐linked structure is introduced into fluorinated poly(aryl ether) (named as FPAE) with high molecular weight (M_w, 140 000 g mol^?1) and linear molecular structure using nucleophilic substitution reaction at the ortho‐position of decafluorobiphenyl monomer units in the FPAE molecular chain. The curing temperature and curing time are optimized and the final conditions for the cross‐linking reaction in this study are determined to be 300 °C for 1 h. Moreover, the dielectric constant and dielectric loss of the C‐FPAE film respectively are 2.67 and 0.006 at 1000 Hz when 1 wt% of crosslinking agent is added, and the cross‐linked fluorinated poly(aryl ether) film shows excellent thermal stability (T_d(5%), 495 °C), dimensional stability, hydrophobic properties, and high storage modulus in high temperature environments. Such novel low dielectric material with excellent performances has important application value in the aerospace and the integrated electronics field.     

Mechanical property and morphology comparison between the two blends poly(propylene)/ethylene‐propylene‐diene monomer elastomer and poly(propylene)/maleic anhydride‐g‐ethylene‐propylene‐diene monomer

The comparison of the mechanical properties between poly(propylene)/ethylene‐propylene‐diene monomer elastomer (PP/EPDM) and poly(propylene)/maleic anhydride‐g‐ethylene‐propylene‐diene monomer [PP/MEPDM (MAH‐g‐EPDM)] showed that the latter blend has noticeably higher Izod impact strength but lower Young's modulus than the former one. Phase morphology of the two blends was examined by dynamic mechanical thermal analysis, indicating that the miscibility of PP/MEPDM was inferior to PP/EPDM. The poor miscibility of PP/MEPDM degrades the nucleation effectiveness of the elastomer on PP. The observations of the impact fracture mode of the two blends and the dispersion state of the elastomers, determined by scanning electron microscopy, showed that PP/EPDM fractured in a brittle mode, whereas PP/MEPDM in a ductile one, and that a finer dispersion of MEPDM was found in the blend PP/MEPDM. These observations indicate that the difference in the dispersion state of elastomer between PP/EPDM and PP/MEPDM results in different fracture modes, and thereby affects the toughness of the two blends. The finer dispersion of MEPDM in the blend of PP/MEPDM was attributed to the part cross‐linking of MEPDM resulting from the grafting reaction of EPDM with maleic anhydride (MAH) in the presence of dicumyl peroxide (DCP). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2486–2491, 2002     

Nylon—6含油废水除油并回收单体的实验研究

本文介绍了Ｎｙｌｏｎ－６含油乳化废水破乳除油并回收单体的方法。