基于RHT模型双孔同时爆破均质岩体损伤的数值模拟

为探究双孔爆破时炮孔间距和额外自由面对爆破过程中爆破损伤的影响,基于RHT（Riedel-Hiermaier-Thoma）损伤本构建立了多组三维数值模型,利用模型损伤云图研究不同爆破条件下的岩石爆破过程,通过自定义变量—有效损伤率的变化探究炮孔周围岩石损伤的时空演化过程。结果表明：随着炮孔间距的增加,岩石有效损伤率逐渐递减,相同截面处的有效损伤率在炮孔间距最小的方案中最大,相邻炮孔间的爆破能量叠加作用随炮孔间距的增大而减弱,合适的炮孔间距可以获得更加理想的爆破效果;岩石有效损伤率随着自由面到炮孔中心处距离的增大而逐渐减小,爆破能量倾向于向自由面方向传播,额外自由面对爆破能量分布的影响随自由面与炮孔间距的增大而减弱。数值模拟结果对研究双孔爆破能量的传递法则具有一定的借鉴意义。     

黄铜中纳米级微裂纹的形核与钝化

黄铜薄膜试样在透射电镜中原位拉伸观察表明，在平衡条件下加载裂发出的位错纯化成无位错区，它是一个应变很高的异常弹性区。当缺口足够锐，外加载荷足够大时，这个非线弹性区中的应力有可能达到原子键合力，从而使纳米级微裂纹在无位错区中不连续形核，或从钝化的原裂纹顶端形核。这个微裂纹一昊形核，即使保持恒位移，也将钝化成空洞或缺口。     

锂离子电池正极材料第一原理计算研究

利用第一原理计算方法可分析和预测锂-金属氧化物电池正极材料在Li离子嵌入脱出过程中的电势和稳定性等性能。本文详细介绍了第一原理计算方法的理论背景以及目前LiCoO2正极材料计算研究的现状。利用此方法对LiNiO2及多组分材料掺杂进行研究是今后工作的重点。     

Sensing, modeling and control for laser-based additive manufacturing

Laser-Based Additive Manufacturing (LBAM) is a promising manufacturing technology that can be widely applied to part preparation, surface modification, and Solid Freeform Fabrication (SFF). A large number of parameters govern the LBAM process. These parameters are sensitive to the environmental variations, and they also influence each other. This paper introduces the research work in RCAM on improving the performance of the LBAM process. Metal powder delivery real-time sensing and control is studied to achieve a controllable powder delivery for fabrication of functionally graded material. A closed-loop control system based on infrared image sensing is built for control of the heat input and size of the molten pool in the LBAM process. The closed-loop control results show a great improvement in the geometrical accuracy of the built features. A three-dimensional finite element model is also established to explore the thermal behavior of the molten pool in the closed-loop controlled LBAM process.     

多元酚——甲醛树脂中游离酚,游离醛含量的测定

多元酚－－甲醛树脂是本院开发的热固粘接剂新产品，本文给出了这一产品技术指标中游离酚、游离醛含量的测定方法，并对方法进行了讨论。     

无垫片焊接密封法兰计算方法的讨论

应用华脱尔斯法建立了内、外焊唇焊接法兰结构的力学模型,在相同设计条件和材料状况下,进行了内、外焊唇结构法兰的受力分析、设计计算和结构尺寸对比。笔者认为:如果设计计算成立且焊接条件允许,内焊唇结构的法兰比外焊唇结构的法兰螺栓载荷减小,截面积减少,法兰直径和厚度也相应大幅降低。     

DZG-10焦化汽油加氢精制催化剂的开发和工业应用

介绍了DZG-10焦化汽油加氢精制催化剂的开发过程和工业应用。通过对载体的改性，提高了大孔所占比例,将催化剂外形改为齿球形，增大了催化剂的外表面积，提高了催化剂的活性和机械强度。从连续平稳运转26个月情况来看，催化剂床层压差较低，说明催化剂床层结垢、结焦和催化剂破损情况不明显。开发的DZG-10催化剂是一种优良的纯焦化汽油加氢精制催化剂，具有较好的应用前景。     

Effect of surface free energy on the adhesion of biofouling and crystalline fouling

Pipelines and heat exchangers using seawater as coolant suffer from biofouling. Biofouling not only reduces heat transfer performance significantly, but also causes considerable pressure drop, calling for higher pumping requirements. It would be much more desirable if surfaces with an inherently lower stickability for biofouling could be developed. In this paper, a cost-effective autocatalytic graded Ni-Cu-P-PTFE composite coating with corrosion-resistant properties was applied to reduce biofouling formation. The experimental results showed that the surface free energy of the Ni-Cu-P-PTFE coatings, which were altered by changing the PTFE content in the coatings, had a significant influence on the adhesion of microbial and mineral deposits. The Ni-Cu-P-PTFE coatings with defined surface free energy reduced the adhesion of these deposits significantly. The anti-bacterial mechanism of the composite coatings was explained with the extended DLVO theory.     

绿色节能脲醛树脂粘合剂的生产新方法

介绍了低游离甲醛含量的低醛/尿摩尔比脲醛树脂木材粘合剂的生产新方法。利用控制不同反应阶段不同工艺条件,使整个生产周期缩短20%,并充分利用反应热,使能耗降低。