NdBO_3和 Nd(BO_2)_3的标准生成自由能

用 CaF_2单晶和 ZrO_2(+MgO)为固体电解质分别构成原电池:■和 Pt,B_((s)),NdBO_(3(s)),Nd(BO_2)_(3(s))|ZrO_2|Cr_2O_(3(s)),Cr_((s)),Pt联合测了 NdBO_3和 Nd(BO_2)_3的标准生成自由能:ΔG~0_(NdBO_3)=-1757+3.8×10~(-1)TΔG~0_(Nd)(BO_2)_3=-3435+8.8×10~(-1)T由此求出由氧化物生成 NdBO_3及 Nd((BO_2)_3)的反应的标准生成自由能变化:1/2Nd_2O_(3(s))+1/2B_2O_(3■)=NdBO_(3(s))ΔG~0_(NdBO_3)=-242+1.4×10~(-1)T和 1/2Nd_2O_(3(s))+3/2B_2O_(3(s))=Nd(BO_2)_(3■)ΔG~0′_(NdBO_2)3=-693+4.6×10~(-1)T     

通过直接栅电流测量研究PMOSFET's热载流子损伤

通过直接栅电流测量方法研究了热载流子退化和高栅压退火过程中PMOSFET's热载流子损伤的生长规律.由此,给出了热载流子引起PMOSFET's器件参数退化的准确物理解释.并证明了直接栅电流测量是一种很好的研究器件损伤生长和器件参数退化的实验方法.     

Implicit integration and consistent tangent modulus of a time‐dependent non‐unified constitutive model

This paper describes the implicit integration and consistent tangent modulus of an inelastic constitutive model with transient and steady strain rates, both of which are time‐ and temperature‐dependent; the transient rate is influenced by the evolution of back stress decomposed into parts, while the steady rate depends only on applied stress and temperature. Such a non‐unified model is useful for high‐temperature structural analysis and is practical owing to the ease in determining material constants. The implicit integration is shown to result in two scalar‐valued coupled equations, and the consistent tangent modulus is derived in a quite versatile form by introducing a set of fourth‐rank constitutive parameters into the discretized evolution rule of back stress. The constitutive model is, then, implemented in a finite element program and applied to a lead‐free solder joint analysis. It is demonstrated that the implicit integration is very accurate if the multilinear kinematic hardening model of Ohno and Wang is employed, and that the consistent tangent modulus certainly affords quadratic convergence to the Newton–Raphson iteration in solving nodal force equilibrium equations. Copyright © 2003 John Wiley & Sons, Ltd.     

NdCl_3·nTBP/MgCl_2-AlR_3催化体系合成丁二烯橡胶

探讨了以NdCl_3的磷酸三丁酯(TBP)溶液为主催化剂、烷基铝为助催化剂、MgCl_2为载体组成的Ziegler-Natta型催化体系引发丁二烯(Bd)聚合的某些规律。用AlEt_3作助催化剂,聚合物的顺1,4-结构含量仅为57％,反1,4-结构含量为42％;而以Al(i-Bu)_3作助催化剂,聚合物的顺1,4-结构含量为88％,反1,4-结构含量为11％。各种陈化体系中,以NdCl_3·nTBP/MgCl_2-Al(i-Bu)_3-Ip三元体系的催化活性最高,当Nd/Bd(摩尔比)为7×10~(-5)时,单体转化率达80％。低温聚合可获得高顺式、高分子量聚合物。     

Extraction of penicillin G from simulated media by an emulsion liquid membrane process

The extraction of penicillin G from simulated media was performed by water/oil/water (w/o/w) emulsion liquid membranes (ELMs) and studied under various operational conditions in a batch system. The degree of extraction achieved was between 80% and 95% under specific conditions. A concentration of greater than nine times the initial concentration of penicillin G in the external phase was obtained in the internal phase. The pH of the internal aqueous solution, containing a basic salt, was theoretically calculated on the basis of the amount of penicillin G transported into the internal phase. The calculated results agreed with the experimental data well and were used to select a suitable type and concentration of a basic salt in the internal phase to give a pH within the range 5 to 8 where penicillin G was stable after the termination of extraction. The extraction of penicillin G was successfully performed by the ELM process with sodium carbonate in the internal phase.     

喇曼自由电子激光器辐射谱的测量

本文报道了利用微波栅摄谱仪测量在超辐射工作条件下的喇曼自由电子激光器辐射谱的初步结果。观察到了毫米波自由电子激光器的调谐特性。实验结果表明,辐射谱的中心频率随波荡场强度的增加而减小,这与考虑波导模影响的集体制式自由电子激光的有关理论预言相符。     

射频放大器互调失真检测和载波抵消的研究

采用高功率射频信号内部互调失真的包络特性检测与比较技术,对射频功率带外信号进行检测和估计。设计用于高功率射频放大器前馈技术线性化的一个带外信号检测器。探讨如何进行射频载波抵消以及检测放大器互调失真信号。     

低压电力线扩频载波远程抄表系统的研究

介绍一种利用现有的普遍存在的低压电力网和公共电话网作为数据采集与传输通道 ,并应用扩频技术的低压电力线载波远程抄表系统的结构、工作原理、设计方案和实现方法等。该系统具有实施简单、使用面广等显著的特点 ,适合我国当前的国情 ,具有较高的实用价值和良好的应用前景。     

自由锻锤上冷冲厚板新工艺

介绍了自由锻锤上冷冲厚板工艺的特点和模具主要结构。以及如何解决凸凹模间隙、选用小间隙冲孔时刃口磨损加剧的问题。研制出了降低磨损。提高模具寿命的润滑剂配方。设计了适合自由锻锤上厚板冲孔的模具，对在自由锻锤上厚板冲孔进行了有益的尝试。扩大了自由锻设备的加工范围。解决了不具备大型压力机情形下的生产难题。     

PCC载体氧化剂的制备及应用研究

制备得到各种有代表性的氯铬酸吡啶(PCC)无机载体氧化试剂,以苯甲醇选择性氧化成苯甲醛为探针反应,考察了载体、反应条件对氧化反应效率的影响,控制各载体氧化剂中PCC的负载量均为1.8 mmol/g。室温下反应,搅拌时间为30 m in,苯甲醇的氧化反应产率为:分子筛65.8%,活性炭75.4%,氧化铝94.6%,硅胶96.9%,相同条件下PCC的产率为65.8%。硅胶是制备负载PCC的优良载体,在载体氧化剂对苯甲醇的氧化反应中,一定范围内增加反应时间和载体加入量都可以提高氧化产率。