基于CF的全集成MOSFET—C六阶低通滤波器的仿真分析

本文提出了以电流跟随器ＣＦ为基本电路元件的全集成ＭＯＳＦＥＴ－Ｃ精确连续时间六阶低通滤波器电路，并应用ＰＳＰＩＣＥ－Ⅱ通用模拟电路程序，对其幅频特性和相频特性进行了计算机仿真分析，得出了实用的结论。     

混合综采工作面覆岩运移规律及空间结构特征分析

基于平煤十二矿深部开采面临的排矸量大、辅助运输困难、矿区环境污染以及常规充填面产能不足工程背景,创新了矸石充填与垮落法混合综采技术并阐述了其技术内涵。采用理论分析、物理相似模拟和现场实测方法系统地研究了混合综采工作面覆岩运移规律和空间结构特征。通过理论分析得到了不同充实率状态下混合综采工作面覆岩空间结构特征;物理相似模拟结果表明,混合综采工作面充填段基本顶仅发生弯曲下沉,而垮落段直接顶垮落、基本顶断裂,垮落段基本顶平均下沉量是充填段的4.2倍,覆岩空间结构表现出明显的非对称特征。矿压实测数据显示,充填段采场无明显的来压现象,垮落段来压现象显著,初次来压步距约30 m,周期来压步距约22 m,动载系数达1.7左右;岩层钻孔窥视结果观察到充填段顶板完整,覆岩空间结构呈现“两带”发育特征;垮落段覆岩结构呈“三带”发育特征,混合综采工作面覆岩非对称性空间结构特征显著。     

一种具有片上译码/放大功能的微阵列电路及其与生物纳米系统的集成

提出了一种用SMIC 0.18μm CMOS混合信号工艺实现的全集成CMOS微阵列生物芯片,并成功地实现了其与一种新的生物纳米系统的集成. 该电路实现了19μm×19μm电极的4×4 (16单元）阵列,反相电极,电流模式放大器,译码电路,以及逻辑控制电路的单片集成,并能够提供-1.6~1.6V的组装电压,8bit的电位分辨率及39.8dB的电流增益,电源电压为1.8V,而失调和噪声电流分别为5.9nA和25.3pArms. 在实验中,利用该电路实现了对30nm聚乙烯醇包裹的磁性粒子的片上选择性组装,并对实验结果进行了讨论,从而验证了该电路的正确性和该集成方法的可行性.     

薄膜全耗尽SOICMOS器件和电路

对全耗尽 SOI(FD SOI) CMOS器件和电路进行了研究 ,硅膜厚度为 70 nm.器件采用双多晶硅栅结构 ,即NMOS器件采用 P+多晶硅栅 ,PMOS器件采用 N+多晶硅栅 ,在轻沟道掺杂条件下 ,得到器件的阈值电压接近0 .7V.为了减小源漏电阻以及防止在沟道边缘出现空洞 (V oids) ,采用了注 Ge硅化物工艺 ,源漏方块电阻约为5 .2Ω /□ .经过工艺流片 ,获得了性能良好的器件和电路 .其中当工作电压为 5 V时 ,0 .8μm 10 1级环振单级延迟为 45 ps     

Design of Fully Balanced Analog Systems Based on Ordinary and/or Modified Single-Ended Opamps

The system architectures, which allow a high performance fully balanced (FB) system based on ordinary/modified single-ended opamps to be implemented, are investigated and the basic and general requirements are formulated. Two new methods of an FB analog system design, which contribute towards achieving both a high performance IC system implementation and a great reduction of the design time are presented. It is shown that a single-ended system based on any type of opamp (rail-to-rail, constant g _m , etc.), realized in any technology (CMOS, bipolar, BiCMOS, GaAs), can be easily and effectively converted to its FB counterpart in a very practical way. Using the proposed rules, any FB system implementation with opamps (data converter, modulator, filter, etc.) requires only a single-ended system version design and the drawbacks related to a conventional FB system design are avoided. The principles of the design are pointed out and they are verified by experimental results.     

CMOS current controlled fully balanced current conveyor

mW. Comparisons between measured and HSpice simulation results are also given.     

SML：BCF丝的革新性纺丝设备

奥地利ＳＭＬ公司的纺丝生产线可以生产各种各样的长丝。在巴黎ＩＴＭＡ’９９上,ＳＭＬ公司展出了第一台用复丝来生产ＢＣＦ丝的设备－Ａｕｓｔｒｏｆｉｌ,这套设备会给生产商带来极大的便利。     

深圳机场软基处理方案比较

 以深圳机场软基处理为例， 在众多的软基处理设计方案中， 选取了排水固结法中传统的全堆载预压和新型的真空联合堆载进行对比和探讨， 阐述了各方案的优缺点， 并从中推荐了最佳设计方案。     

High-Efficiency Organic Solar Cells Based on a Low-Cost Fully Non-Fused Electron Acceptor

A series of tetrathiophene-based fully non-fused ring acceptors (4T-1, 4T-2, 4T-3, and 4T-4), which can be paired with the star donor polymer PBDB-T to fabricate highly efficient organic solar cells are developed. Tailoring the size of lateral chains can tune the solubility and packing mode of acceptor molecules in neat and blend films. It is found that the incorporation of 2-ethylhexyl chains can effectively change the compatibility with the donor polymer PBDB-T, and an encouraging power conversion efficiency of 10.15% is accomplished by 4T-3-based organic solar cells. It also presents good compatibility with the other polymer donor and an even higher power conversion efficiency (PCE) of 12.04% is achieved based on D18:4T-3 blend, which is the champion PCE for the fully non-fused acceptors. Importantly, these inexpensive tetrathiophene fully non-fused ring acceptors provide cost-effective photovoltaic performance. The results demonstrate a high photovoltaic performance from synthetically inexpensive materials could be achieved by the rational design of non-fused ring acceptor molecules.     

Acid and Alkali-Resistant Textile Triboelectric Nanogenerator as a Smart Protective Suit for Liquid Energy Harvesting and Self-Powered Monitoring in High-Risk Environments

Industrialization and anthropogenic activities are expected and unavoidable to consummate the current resources of humankind, which also lead to accidents in the laboratory, chemical plants, or other high risk areas that cause severe burns, or even casualties. Increased casualties in such accidents are due to inappropriate safety measures and prevention. Here, a smart anti-chemical protective suit with a bio-motion energy harvesting and self-powered safety monitoring system is demonstrated, which can protect the body from chemical harm, detect sudden chemical spills, monitor human real-time living signals, and trigger alarms in an emergency. Particularly, a fabric triboelectric nanogenerator (F-TENG), which is fabricated by the all-fiber single-electrode triboelectric nanogenerator yarn (SETY), works as the basic elements of the intelligent suit. The SETY with core-shell structured design shows a high sensitivity to the corrosive liquids including acids and alkalis. Furthermore, the working principle of the yarn based nanogenerator that is powered by contacting with acid liquid droplets is demonstrated for the first time. In addition, discretionary thickness, permeability, and any other functionalities are also achieved by taking advantage of the fabric structure. This self-powered smart anti-chemical protective suit equipped with a real time monitoring system will benefit the wearer who works in a very high-risk environment.