Self‐Powered,Flexible, and Solution‐Processable Perovskite Photodetector Based on Low‐Cost Carbon Cloth

Flexible perovskite photodetectors are usually constructed on indium‐tin‐oxide‐coated polymer substrates, which are expensive, fragile, and not resistant to high temperature. Herein, for the first time, a high‐performance flexible perovskite photodetector is fabricated based on low‐cost carbon cloth via a facile solution processable strategy. In this device, perovskite microcrystal and Spiro‐OMeTAD (hole transporting material) blended film act as active materials for light detection, and carbon cloth serves as both a flexible substrate and a conductive electrode. The as‐fabricated photodetector shows a broad spectrum response from ultraviolet to near‐infrared light, high responsivity, fast response speed, long‐term stability, and self‐powered capability. Flexible devices show negligible degradation after several tens of bending cycles and at the extremely bending angle of 180°. This work promises a new technique to construct flexible, high‐performance photodetectors with low cost and self‐powered capability.     

Design of active and stable oxygen reduction reaction catalysts by embedding Co<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> nanoparticles into nitrogen-doped carbon

The oxygen reduction reaction (ORR) is essential in research pertaining to life science and energy. In applications, platinum-based catalysts give ideal reactivity, but, in practice, are often subject to high costs and poor stability. Some cost-efficient transition metal oxides have exhibited excellent ORR reactivity, but the stability and durability of such alternative catalyst materials pose serious challenges. Here, we present a facile method to fabricate uniform Co _x O _y nanoparticles and embed them into N-doped carbon, which results in a composite of extraordinary stability and durability, while maintaining its high reactivity. The half-wave potential shows a negative shift of only 21 mV after 10,000 cycles, only one third of that observed for Pt/C (63 mV). Furthermore, after 100,000 s testing at a constant potential, the current decreases by only 17%, significantly less than for Pt/C (35%). The exceptional stability and durability results from the system architecture, which comprises a thin carbon shell that prevents agglomeration of the Co _x O _y nanoparticles and their detaching from the substrate.

Open image in new window

     

Freestanding hierarchical porous carbon film derived from hybrid nanocellulose for high-power supercapacitors

Nanocellulose is a sustainable and eco-friendly nanomaterial derived from renewable biomass.In this study,we utilized the structural advantages of two types of nanocellulose and fabricated freestanding carbonized hybrid nanocellulose films as electrode materials for supercapacitors.The long cellulose nanofibrils (CNFs) formed a macroporous framework,and the short cellulose nanocrystals were assembled around the CNF framework and generated micro/mesopores.This two-level hierarchical porous structure was successfully preserved during carbonization because of a thin atomic layer deposited (ALD) Al2O3 conformal coating,which effectively prevented the aggregation of nanocellulose.These carbonized,partially graphitized nanocellulose fibers were interconnected,forming an integrated and highly conductive network with a large specific surface area of 1,244 m2·g-1.The two-level hierarchical porous structure facilitated fast ion transport in the film.When tested as an electrode material with a high mass loading of 4 mg·cm-2 for supercapacitors,the hierarchical porous carbon film derived from hybrid nanocellulose exhibited a specific capacitance of 170 F.g-1and extraordinary performance at high current densities.Even at a very high current of 50 A·g-1,it retained 65％ of its original specific capacitance,which makes it a promising electrode material for high-power applications.     

Synthesis of large-scale atomic-layer SnS<Subscript>2</Subscript> through chemical vapor deposition

Two-dimensional layers of metal dichalcogenides have attracted much attention because of their ultrathin thickness and potential applications in electronics and optoelectronics.Monolayer SnS2,with a band gap of ～2.6 eV,has an octahedral lattice made of two atomic layers of sulfur and one atomic layer of tin.Till date,there have been limited reports on the growth of large-scale and high quality SnS2 atomic layers and the investigation of their properties as a semiconductor.Here,we report the chemical vapor deposition (CVD) growth of atomic-layer SnS2 with a large crystal size and uniformity.In addition,the number of layers can be changed from a monolayer to few layers and to bulk by changing the growth time.Scanning transmission electron microscopy was used to analyze the atomic structure and demonstrate the 2H stacking poly-type of different layers.The resultant SnS2 crystals is used as a photodetector with external quantum efficiency as high as 150％,suggesting promise for optoelectronic applications.     

A computational framework for scale‐bridging in multi‐scale simulations

A computational framework for scale‐bridging in multi‐scale simulations is presented. The framework enables seamless combination of at‐scale models into highly dynamic hierarchies to build a multi‐scale model. Its centerpiece is formulated as a standalone module capable of fully asynchronous operation. We assess its feasibility and performance for a two‐scale model applied to two challenging test problems from impact physics. We find that the computational cost associated with using the framework may, as expected, become substantial. However, the framework has the ability of effortlessly combining at‐scale models to render complex multi‐scale models. The main source of the computational inefficiency of the framework is related to poor load balancing of the lower‐scale model evaluation We demonstrate that the load balancing can be efficiently addressed by recourse to conventional load‐balancing strategies. Copyright © 2016 John Wiley & Sons, Ltd.     

Investigating the influence of tool shape during FSW of aluminum alloy via CFD analysis

This paper describes the application of the CFD code, Comsol Multiphysics, to modeling the 3-D metal flow in friction stir welding of AA 2024-T3 aluminum alloy in order to investigate the influence of tool shape over the metal flow. Heat transfer and non-Newtonian flow equations were solved simultaneously. The results from the benchmark experiments found in the literature were used for validation purposes. Scrolled shoulders and threaded pins were given as kinematic boundary conditions. This made the computational problem an easy one. A welding engineer can predict the metal flow around the tool with different scrolls and threads under any welding conditions without making expensive experiments. Investigation of the velocity field before actual welding can save a lot of engineering hours.     

开缝翅片管换热器表面积尘与压降特性的实验研究

翅片管换热器表面沉积的粉尘会导致换热器压降增加。本文搭建了换热器积灰可视化实验台,选取开缝翅片管换热器为测试样件,在风速范围为1.0~2.3 m/s,喷粉浓度范围为2.1~10.8 g/m~3的条件下进行实验,研究了换热器表面的粉尘沉积特性及空气侧压降变化。结果表明:粉尘主要沉积在翅片迎风面的前缘开缝处以及换热管的迎风面上;高风速有利于粉尘沉积并增大积灰前后压降增幅,在风速变化范围内,粉尘沉积量最多增加98.4%,积灰前后压降增幅最多增加93.8%;提高喷粉浓度有利于粉尘沉积并增大积灰前后的压降增幅;在喷粉浓度变化范围内,粉尘沉积量最多增加22.8%,积灰前后压降增幅最多增加28.6%;在积灰过程中,空气侧压降比粉尘沉积量更快达到稳定状态。     

High throughput research and evaporation rate modeling for solvent screening for ethylcellulose barrier membranes in pharmaceutical applications

Context: Ethylcellulose is commonly dissolved in a solvent or formed into an aqueous dispersion and sprayed onto various dosage forms to form a barrier membrane to provide controlled release in pharmaceutical formulations. Due to the variety of solvents utilized in the pharmaceutical industry and the importance solvent can play on film formation and film strength it is critical to understand how solvent can influence these parameters.

Objective: To systematically study a variety of solvent blends and how these solvent blends influence ethylcellulose film formation, physical and mechanical film properties and solution properties such as clarity and viscosity.

Materials and methods: Using high throughput capabilities and evaporation rate modeling, thirty-one different solvent blends composed of ethanol, isopropanol, acetone, methanol, and/or water were formulated, analyzed for viscosity and clarity, and narrowed down to four solvent blends. Brookfield viscosity, film casting, mechanical film testing and water permeation were also completed.

Results and discussion: High throughput analysis identified isopropanol/water, ethanol, ethanol/water and methanol/acetone/water as solvent blends with unique clarity and viscosity values. Evaporation rate modeling further rank ordered these candidates from excellent to poor interaction with ethylcellulose. Isopropanol/water was identified as the most suitable solvent blend for ethylcellulose due to azeotrope formation during evaporation, which resulted in a solvent-rich phase allowing the ethylcellulose polymer chains to remain maximally extended during film formation. Consequently, the highest clarity and most ductile films were formed.

Conclusion: Employing high throughput capabilities paired with evaporation rate modeling allowed strong predictions between solvent interaction with ethylcellulose and mechanical film properties.     

A size effect law for notched tensile strength of woven carbon/epoxy laminates

Specimen-size effect and notch-size effect on the tensile strength of woven fabric carbon/epoxy laminates are evaluated and modeled. For two different layups of [(0/90)₁₂] and [(±45)₂/(0/90)₅]_S, respectively, static tension tests were performed on two-dimensional geometrically similar unnotched and double-edge notched specimens scaled to three different sizes. Experimental results demonstrate that the notched strength of the woven CFRP laminates depend on the size of specimen as well as the size of notch. The ratio of notched strength to unnotched strength decreases as the length of notch increases, regardless of the size of specimen. For a given size of notch, the notch strength ratio becomes larger with decreasing size of specimen. A notch-size effect law is derived by means of the Neuber interpolation method. A specimen-size effect is embedded into the notch sensitivity parameter involved by the notch-size effect law to establish a size effect law that can cope with these two kinds of size effect. The engineering size effect law proposed can adequately describe the specimen-size effect as well as notch-size effect on the tensile strength of the woven CFRP laminates. It is also demonstrated that the size effect law allows determining the size independent fracture toughness on the basis of notched strengths of small specimens that fail in a quasi-brittle manner.