Cure monitoring of thermoset coatings

The combination of favorable features of tensile mode dynamic mechanical analysis and torsional braid analysis leads to a useful method for cure monitoring of thermoset coatings. This sensitive technique allows the observation of cure reactions over a wide time and temperature range, thus including gelation and long-term curing in one measurement. Isothermal baking can be simulated realistically, since evaporation of volatile compounds like solvents or blocking agents is not hindered and the sample film is in direct contact with the heating atmosphere. Examples are given showing the cure behavior of automotive clear coats and electro coats depending on parameters like crosslinker type and catalytic agents.     

Application of the dynamical flexural resonance technique to industrial materials characterisation

The determination of the Young’s modulus and damping coefficient Q⁻¹ by means of non-destructive vibrating techniques has been applied to bulk and coated industrial materials. Extensions of a previous analytic model of composite beam allow to determine accurately the macroscopic modulus of each component of multilayered structural materials as coated superalloys or nitride-hardened steels. Furthermore, the study of glasses and polymers has been investigated. An attempt of normalisation of the modulus versus temperature curves allows to establish master curves depending on the specific structure, from metallic glasses to polymeric glasses. Finally a comparison of dynamical modulus and Q⁻¹ values measured between resonant (>1 kHz) and subresonant techniques (10⁻³ to 10 Hz) in relation to the loading frequencies applied in real conditions has been under folder. For metallic materials such as forged or rolled titanium alloys, the brittle-to-fragile transition occurs abruptly or smoothly with a shift of 300 K following the range of excitation frequencies.     

Synthesis of diamond crystals and films using an oxygen-acetylene flame under atmosheric pressure

Diamond growth with rates up to 100 to 140 μm/hr was achieved using an oxygen-acetylene combustion spraying technique in an atmospheric environment. Investigations on the processing indicated that the gas flow ratio, substrate position, substrate temperature, temperature distribution, and substrate pretreatment were the most important factors affecting the growth of diamond crystals. Evaluation by means of X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and electron probe microanalysis showed that the synthesized diamond was nearly perfect in morphology, structure, and purity.     

Procedures for analysis of strain transfer in the acetabular region in vitro

The failure of acetabular cups via loosening, migration or fracture is partially related to the stress distribution existing in the acetabular region. The complexity of the investigation of these stresses demands the application of a variety of model testing techniques involving combined embedded strain gauging, finite element analysis, transmission and reflective photoelasticity and crack propagation studies. The application of these procedures are described and the difficulties of obtaining representative loadings and restraints are commented upon.     

从数字看发展片式电容器面临的机遇与挑战

采用海关进、出口统计和行业生产统计资料,通过计算、分析,用数字来说明国内发展片式多层陶瓷电容器、片式钽电解电容器、片式铝电解电容器、片式有机薄膜电容器所面临的机遇与挑战,并对其国内市场需求总量、额,国产品在国内市场占有率等做出评估,为有关单位了解片式电容器的发展提供参考,为国产产品更有效地进入国内市场、促进其发展提供依据。     

Surface chemistry of tribochemical reactions explored in ultrahigh vacuum conditions

The thermal decomposition of model extreme-pressure lubricant additives on clean iron was studied in ultrahigh vacuum conditions using molecular beam strategies. Methylene chloride and chloroform react to deposit a solid film consisting of FeCl₂ and carbon, and evolve only hydrogen into the gas phase. No gas-phase products and less carbon on the surface are detected in the case of carbon tetrachloride. Dimethyl and diethyl disulfide react on clean iron to deposit a saturated sulfur plus carbon layer at low temperatures (∼600 K) and an iron sulfide film onto a Fe + C underlayer at higher temperatures (∼950 K). Methane is the only gas-phase product when dimethyl disulfide reacts with iron. Ethylene and hydrogen are detected when diethyl disulfide is used.     

建筑涂料电脑调色系统的建立

分别从市场及技术方面讨论了建立电脑调色系统的主要程序、方法和技术要求等,讨论了建立调色系统所需的主要设备和仪器。     

瓦斯尾巷在高档普采工作面的应用

介绍了高档普采工作面利用掘送瓦斯尾巷等措施形成回风空间 ,从根本上解决高档普采工作面的瓦斯超限问题 ,其工艺有利于在其它采煤工作面内应用     

DCA-112催化裂化抑焦剂的工业应用

针对改善催化裂化反应微环境研制开发的DCA - 112催化裂化抑焦剂 ,具有抑制生焦、改善产品分布、应用流程简单、加注方便等特点 ,经中石化长炼分公司 1Mt/a重油催化装置工业应用表明 ,在相近的工艺条件下 ,掺渣比提高 4 13个质量百分点 ,总液收提高 1 0 2个质量百分点。