Kinetic analysis of the crystallization of poly(p-phenylene sulphide)

Growth rates of spherulites were measured in poly(p-phenylene sulphide) crystallized from the melt and the quenched glass over the temperature range 100°C–280°C, possibly the most extensive overall range yet reported for any polymer and, as such, most propitious for study of régime III crystallization. For a medium M.wt. polymer, a régime II → III transition was obtained at 208°C using values of transport parameters common to many polymers ($\text{U1 = 1400}\text{cal mol}{}^{\mathrm{?1}}$, T_∞ ? T_g = 30°C) together with experimentally determined values of T⁰_m(315°C) and T_g(92°C). Under these conditions, the régime III/II slope ratio was found to be 2.07 (i.e. only 3.5% higher than predicted by régime theory), and reasonable estimates of surface free energies and of the work of chain folding were obtained. Other choices of the transport terms, including WLF and zero values, did not allow successful kinetic analyses. Although a régime I → II transition is predicted to occur at the high-temperature end of our growth-rate data, we found no experimental evidence for it. For a low M.wt. polymer, our analysis showed that régime III kinetics is obeyed at low temperatures, while at higher ones there is a continuous departure from that behaviour without, however, full attainment of régime II kinetics.     

Dielectric, Ferroelectric and Piezoelectric Studies of PMN Modified PLZT Ceramics

Dielectric, ferroelectric and piezoelectric properties of xPb(Mg_1/3Nb_2/3)O₃-(1-x)(Pb_0.988 La_0.012)(Zr_0.535Ti_0.465)O₃ ceramic system synthesized through columbite precursor method are investigated. X-ray diffraction patterns of ceramics indicated pseudocubic phase formation with pyrochlore phase. Grain growth (4.47 μ m) and apparent density (7.68 gm/cm³) enhanced remarkably in 0.8PMN-0.2PLZT composition, respectively. Increasing PMN content remarkably increased both room temperature dielectric permittivity (ε_RT = 2316) and dielectric maximum (ε_Tc = 24747) in 0.6PMN-0.4PLZT composition, respectively. PMN substitution in PLZT system enhanced the ferroelectric remanent (P_r = 28.4 μ C/cm²) and spontaneous (P_s = 31.2 μ C/cm²) polarization while coercive field (E_c) continuously decreased in xPMN-(1-x)PLZT system. PMN modification in PLZT system influenced piezoelectric properties (d₃₃, k_p and k_t) throughout the PMN-PLZT system.     

微型构造表征技术在八面河油田的应用

通过对八面河油田井网密集区及井网稀疏的欠开发区的微构造研究,探讨了微构造表征技术。首先在储层多层次逐级对比的基础上,建立主力油层对比关系;密集井网条件下,则利用钻井资料编制油层顶底微型构造图;对于欠开发地区,通过人机联作自动追踪成图技术,输出2m等值线间隔构造图,建立微构造模型。以微构造模型为基础进行潜力评价,部署关键井寻找优质储量或进行开发动态调整。应用该项技术在八面河油田滚动发现了角15块等断鼻翼部局部高点,增加石油地质储量488×10~4t。     

基于高抗热震性能的陶瓷刀具材料的微观结构设计

本文以现有的抗热震断裂和抗热震损伤的评价理论为基础，通过对材料中微裂纹的长度进行预测，从而实现了对陶瓷刀具材料的抗热震性能的微观结构设计。根据此理论对现有材料的抗热震性能的进行预测，预测结果与实际的测量结果相符，验证了该理论的正确性。     

Industrialization of High Performance Sintered NdFeB Magnets

Sintered Nd-Fe-B magnet was manufactured by advanced equipment via a SC (Strip casting) technology.It has integrative performance.     

油库防爆电气设备运行安全管理注意事项

分析了油库防爆电气设备运行中安全管理应注意的几个事项。     

溶胶-凝胶生物玻璃多孔材料显微结构和生物活性的扫描电镜及红外光谱分析

本文利用溶胶．凝胶法制备了CaO-P2O5-SiO，系统生物活性玻璃，并以其为原料制备了用于骨修复及骨组织工程支架的块状生物活性材料。利用体外实验方法(invitro)结合x射线衍射(XRD)、扫描电子显微镜(SEM)和傅立叶变换红外光谱分析(FTIR)技术对不同烧结工艺制备的材料结构、晶相和生物活性的影响进行了分析研究。研究表明，经800℃和1100℃烧结5min的两种材料均有硅磷酸钙Ca5(PO4)2SjO4微晶相析出。烧结温度越高，析出微晶相的体积比例越大，材料的生物活性则越低。在模拟生理溶液中碳酸羟基磷灰石(HCA)只在烧结体中的玻璃颗粒表面形成，而在其硅磷酸钙Ca5(PO4)2SiO4微晶相表面未发现HCA形成。     

动态陶瓷微滤膜净化沐浴污水实用研究

利用自制的动态陶瓷微滤膜对沐浴污水进行了处理,根据处理水质指标及膜操作参数的比较,发现在0.15MPa以下时,膜通量随压力的升高明显增加,大于0.15MPa时,压力对膜通量的影响不明显。合适的操作压力是0.1～0.15MPa,稳定通量为90～110L/m2·h。不同压力出水CODCr去除率达87%～98%、浊度从120°降到3°以下,处理后颜色为无色。并根据实验结果进行了工程化工艺初步设计和经济分析。     

对ADSL接入方式铜缆可用线对率的分析

指出了为发展ADSL而提高市话音频铜线电缆的传输质量和维护水平的必要性,分析了铜线电缆线对有关指标参数低劣的原因和对传输ADSL的影响,并提出了一些改进的意见。     

GS-08乙苯脱氢催化剂在广石化的应用

乙苯脱氢催化剂GS-08催化剂在广州石化总研制的首次应用。