PP/PVC/PP-g-(St-co-MMA)的形态结构

以苯乙烯一甲基丙烯酸甲酯共聚物接枝聚丙烯[PP—g-（St—co—MMA）]为相容剂，利用扫描电子显微镜（SEM）和x射线能谱仪（EDS）对PP／PVC／PP—g-（St—co-MMA）的形态结构进行了研究。由x射线能谱微区分析得到了共混物中氯元素面分布图，对氯元素面分布进行了粒径统计。结果表明，在PP／PVC中加入PP-g-（St—co—MMA）相容剂，共混物亚微观相形态结构发生了变化。PP—g-（St—co—MMA）能够明显降低PP／PVC共混物中PVC分散相的分散尺寸，提高共混物两相之间的相容性。改变相容剂的用量和共混物的组成，都对体系的形态结构产生影响。     

改性淀粉与丙烯酸接枝共聚物的合成及应用性能

研究经过热处理的改性淀粉与丙烯酸的接枝共聚反应。接枝共聚产物在 790cm-1、85 0cm-1(物理改性淀粉的特征吸收峰 )和 172 0cm-1(聚丙烯酸的特征吸收峰 )处的红外光谱验证了接枝共聚反应的发生。探讨了引发剂过硫酸铵浓度、丙烯酸浓度、反应温度和反应时间等因素对接枝率和接枝效率的影响。当 ρ(淀粉 ) =70 g/L、t =6 0℃、反应时间为 3h、c〔(NH4) 2 S2 O8〕 =3 0× 10 -3 mol/L、c(丙烯酸 ) =0 4 2mol/L时 ,合成胶粘剂的初粘力为 10 0 % ,吸水率为 15 0 14 % ,吸油率为 2 0 6 % ,其压制的纸板冲击强度为 3 2 5kN/m ,拉伸强度为 3 75MPa ,与纯淀粉粘接剂相比较 ,所压制纸板的应用性能得到较大的改善。     

聚烯烃接枝马来酸酐接枝率的测定—聚乙烯接枝

以非均相化学接枝法和红外光谱法相结合的方法绘制了定量校正曲线,可用于红外光谱法测定聚乙烯接枝马来酸酐的接枝率。该方法简便快速,准确可靠,重复性好。     

高分子多孔膜的表面改性与抗污染研究

采用羟基化预处理、铈盐引发和碱化预处理、Fe2 /H2O2引发两种引发体系,对聚砜(PS)膜和聚丙烯腈(PAN)膜进行表面接枝丙烯酰胺的改性,研究预处理和表面接枝改性对膜污染的影响。采用红外光谱和X光电子能谱对羟基化和接枝改性的膜表面进行表征。研究表明,表面预处理和接枝后,PS膜和PAN膜的水通量均有所下降,但提高了抗牛血清蛋白膜污染能力。     

GMA接枝SEBS及其对PA 6的改性及增容

用双螺杆反应挤出法将甲基丙烯酸缩水甘油酯(GMA)接枝到氢化苯乙烯-丁二烯-苯乙烯嵌段共聚物(SEBS)上(即SEBS-g-GMA)，研究引发剂过氧化二异丙苯用量、活性单体GMA用量对接枝率的影响；通过双螺杆挤出、共混，制备聚酰胺(PA)6／SEBS-g-GMA、PA 6／SEBS-g-GMA／SEBS合金，研究SEBS-g-GMA对合金体系的相容性影响及增韧作用，探讨了合金体系的形态结构和力学性能。     

聚甲基丙烯酸甲酯／纳米SiO2复合粒子的制备与表征

采用甲基丙烯酸-3-甲氧基硅丙酯（MPs）对分散于甲基丙烯酸甲酯（MMA）中的纳米SiO2粒子进行偶联改性，得到了表面改性的纳米SiO2单体分散液，用原位悬浮聚合方法制备了不同SiO2含量的PMMA／纳米SiO2复合粒子。通过红外光谱、透射电镜、差示扫描量热分析和热重分析等方法对制备的纳米复合粒子进行了表征，结果表明，纳米SiO2粒子在PMMA中分散良好；MMA可通过与MPS的共聚而有效地接枝到SiO2粒子表面，当SiO2含量为6．6％（质量分数，下同）、MPS用量为0．06g／gSiO2时，其接枝率可达73．8％；同时，纳米SiO2的引入可提高PMMA的耐热性能，当Si02含量为14.7％时，其玻璃化转变温度和最大热分解速率时的温度分别提高了11．8℃和18．8℃。     

Immobilization of a cyclodextrin glucanotransferase (CGTase) onto polyethylene film with a carboxylic acid group and production of cyclodextrins from corn starch using CGTase‐immobilized PE film

Carboxylic acid groups were introduced onto polyethylene (PE) film by radiation‐induced graft copolymerization. Subsequently, the clodextrin glucanotransferase (CGTase) was immobilized on the PE film with a carboxylic acid group. The activity of the immobilized CGTase on PE film was in the range of 0.40–1.04 U/cm² per min. The production of cyclodextrins (CDs) from corn starch was examined using the CGTase‐immobilized PE film. The production ratios of CDs using CGTase‐immobilized PE film was in the following order: α–CD > β–CD > γ–CD. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2451–2457, 2002     

Synthesis and characterization of modified chitosan microspheres: Effect of the grafting ratio on the controlled release of nifedipine through microspheres

The grafting of acrylamide onto a chitosan backbone was carried out at three acrylamide concentrations (polymer/monomer ratio = 1:1, 1:2, and 1:3). The synthesis of the grafted polymer was achieved by K₂S₂O₈‐induced free‐radical polymerization. Microspheres of polyacrylamide‐g‐chitosan crosslinked with glutaraldehyde were prepared to encapsulate nifedipine (NFD), a calcium channel blocker and an antihypertensive drug. The microspheres of polyacrylamide‐g‐chitosan were produced by a water‐in‐oil emulsion technique with three different concentrations of glutaraldehyde as the crosslinking agent. Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC) were used to characterize the grafted copolymers, and the microspheres were prepared from them. FTIR and DSC were also used to analyze the extent of crosslinking. The microspheres were characterized by the particle size; the water transport into these microspheres, as well as the equilibrium water uptake, were studied. Scanning electron microscopy confirmed the spherical nature of the particles, which had a mean particle size of 450 μm. Individual particle dynamic swelling experiments suggested that with an increase in crosslinking, the transport became case II. The release of NFD depended on the crosslinking of the network and on the amount of drug loading. Calculating the drug diffusion coefficients with the initial time and later time approximation method further supported this. The drug release in all 27 formulations followed case II transport, and this suggested that the time dependence of the NFD release followed zero‐order kinetics. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2940–2949, 2003     

不变黄HDI-PU/P(MMA-HEMA)互穿网络胶粘剂形态与性能的研究翁祥

制备了HDI(1,6-己二异氰酸酯)型聚酯聚氨酯/聚(甲基丙烯酸甲酯-甲基丙烯酸-β羟乙酯)(HDI-PU/P(MMA-HEMA))互穿网络胶粘剂,研究了接枝剂甲基丙烯酸-β羟乙酯(HEMA)用量对其形态、性能与分子结构的影响。结果表明,接枝剂HEMA可使分散相接枝到连续相中形成复合网络,从而改善其界面的相容性,提高其胶液粘度和初粘力,并可广泛作为制鞋工业用胶。     

新型聚丙烯接枝物的制备及应用

为制备强韧的共混材料,利用熔融接枝法研制了含有两种接技单体的新型聚丙烯接枝物,讨论了第二单体在接枝过程中的作用,并将其应用于尼龙6/聚丙烯(PA6/PP)共混体系,获得了使分散相粒径更细小、界面更模糊的增容效果。