Influence of the Temperature of a Body on Its Weight

The physical preconditions are considered for the temperature of a body to influence the force of gravity experienced by it. The results are given of experiments on weighing metal rods heated by ultrasound which confirm a dependence of the weight of the rods on their temperature.     

硫酸铵-氯化亚锡-孔雀绿体系浮选分离铂

研究了在盐酸介质中硫酸铵存在下氯化亚锡—孔雀绿—水体系浮选分离铂的方法。在最佳实验条件下，铂的浮选率可达100．0％，并与常见贱金属完全分离。     

Gloss Properties and Surface Morphology Relationships of Fruits

Eggplants exhibited a higher average gloss reading (15.3 Gloss Units (GU)) than mature green tomatoes (12.0 GU) and apples (8.2 GU) using a flat surface glossmeter. The same trend was observed using a novel curved surface glossmeter. Scanning electron micrographs revealed that epicuticular wax covering eggplants had a smoother structure than that of tomatoes and apples, providing a more effective light scattering surface. Wax removal resulted in decreases in gloss, with average readings of 9.5, 7.4 and 6.3 GU for eggplants, tomatoes and apples, respectively. These results indicate the extent to which wax may influence shininess, although roughness measurements of flattened peel after wax removal suggest that surface topography also influences gloss.     

涂层材料的断裂分析(英文)

和基体厚度相比,涂层很薄,因此细观力学模型可把基体作为半无限弹性体。由于涂层和基体材料的膨胀系数及弹性系数不匹配,涂层材料中残余热应力的解析解为 E_c/(1-γ_c)·(α_s-α_c)△T。用有限元法校核,该应力和解析解吻合得好。通过对涂层产生裂纹驱动力和断裂韧性的讨论,提出了抗裂涂层厚度公式。     

新型蓝绿发光材料ZnSe／BeTe超晶格的能带剪裁

由于器件的快速退化，101.5小时似乎成了Znse基蓝绿色半导体激光器难于逾越的寿命极限。分析退化机制，发现在强电流注入的半导体激光器中，热退化具有重要影响。研究表明，用作载流子限制层的宽带Ⅱ-Ⅵ族四元合金（如ZnMgSSe）只能对ZnSe中的电子有效地限制，无法对空穴很好地限制;而对BeTe，却只能对空穴进行有效的限制，无法对电子很好地限制。这导致ZnSe（或BeTe）活性层空穴（或电子）漏电发热，引起退化。本文提出以ZnSe／BeTe超晶格为蓝绿发光层，并用包络函数理论具体计算了阱宽、垒宽对载流子能级的不同影响，考察了ZnSe、BeTe厚度比和超晶格周期对带隙、载流子限制能力的调节。为研制新型长寿命蓝绿色半导体激光器提供了一条新的途径。     

Effect of Forming Pressure on the Internal Structure of Alumina Green Bodies Examined with Immersion Liquid Technique

Green bodies prepared by compaction of alumina granules were made transparent by an immersion liquid technique, and the internal structure was characterized with an optical microscope to study the effect of forming pressure on the internal structure. Clear images obtained by the technique provide more detailed information than other existing methods for structures ranging from one to tens of micrometers. Intergranular pores were present between unfractured granules. Their sizes and concentration tended to decrease with increasing forming pressure. However, pores were clearly present even in the green body prepared at 600 MPa. A rod- and needlelike feature was also found and was concluded to correspond to a high-density region. The significance of large pores and high-density regions on processing as well as the details of the technique is discussed.     

变异函数在进间砂体预测中的应用

应用变异函数探讨了砂体的定量预测问题。通过对北二东密井网试验区不同类型砂体，不同井网密和岩厚度的预测，检验了此方法的精度（为70％左右），在原方法的基础上，通过对预报精度的分析并结合精度地质研究进一步完善了该方法，提出二次建模法并应用于北二东西块聚驱井的砂岩厚度预测中，预测精度可提高5％以上，从而说明应用变异函数研究砂体的定量预测问题具有可借鉴性，可以为今后新井调整厚度的预测及砂体描述提供依据。     

求解复杂形状旋转体拉延毛坯直径的新方法--计算机作图查询法

提出了基于AutoCAD软件的确定复杂形状旋转体拉延毛坯直径的方法－计算机作图查询法，这种方法操作严谨，结果准确，比原有的3种方法简捷、快速，是一种值得推广的好方法。     

软体排在长江江新洲堤岸加固工程中的应用

介绍了长江江新洲堤段应用软体排护岸新型技术的情况，结合长江江新洲护岸工程对软体排施工、工艺、设备作简要叙述。     

二极管泵浦内腔倍频激光技术研究进展

评述了二极管泵浦内腔倍频激光技术的发展现状，对解决中小功率下‘绿光问题’的理论及实验方案进行了比较分析，对高功率内腔倍频系统亦进行了初步探讨。