Composition Range of Amorphous Mg-Ni-Y Alloys

Based on the thermodynamic point of view, a method for predication of the composition range of amorphous ter-nary alloys was proposed. The composition range of amorphous ternary alloys is determined by the comparison of the excess free energy of the amorphous alloy and the free energy of competing crystalline states. The free energy is extrapolated from the data of three binary alloys by using Toop‘s model. The method was applied to predict the composition range of amor-phous Mg-Ni-Y alloys. The theoretical results are in good agreement with the available experimental results. It indicates that the present method can be used to predict the composition range for amorphous ternary alloys.     

Effect of RE－Al－N on Structures and Properties of M2 Cast High Speed Steel

M 2highspeedsteel (M 2steel)isamaterialwidelyusedintoolsanddies[1,2 ] .M 2steelischarac terizedbyalongsolidificationrangeandcomplexeu tecticreactions ,whichresultsinsegregationofalloy ingelementsandformationofseveraldifferenttypesofcarbidesduringsolidification[3,4 ] .Forconventionallyprocessedhigh speedsteels ,itisinevitablethatacoarsecarbidenetworkwillbeformedduringsolidifi cation .Coarseprimarycarbidestendtoresultinun evencarbidebandsdistributionafterasubstantialamountofhotprocessing[5] .Ma…     

W-Ni-Cu高比重合金注射成形烧结收缩及性能的研究

研究了W-Ni-Cu高比重合金注射成形工艺过程收缩率和性能。比较了模具尺寸、注射坯尺寸、烧结坯尺寸，及烧结阶段各方向收缩率的关系，发现实际收缩与理论预测收缩率较为一致，但在厚度方向存在与其他方向收缩不一致的情形，这与由重力作用产生的塑料流动有关；还探讨了烧结坯密度与烧结条件的关系，测定了烧结坯的力学性能及断口形貌、金相组织，烧结坯在1400℃，90min烧结达到了99％的相对密度，断裂强度600MPa以上。     

Metal sorption by biomass of melanin‐producing fungi grown in clay‐containing medium

The sorption of toxic metals by fungal mycelia grown in clay‐containing medium is reported in this work. Biomass of melanin‐producing microfungi of the genus Cladosporium (C cladosporioides, C resinae and C herbarum) and Aureobasidium pullulans, clay minerals and fungal mycelia grown in clay‐containing medium were compared for their equilibrium Cu and Cd uptake from pH‐buffered solutions using experimental sorption isotherms. Bentonite (Cherkassy) in the natural form was shown to be the best Cu sorbent compared with the other clays and clay minerals tested. Cu sorption isotherms fitted the Langmuir sorption model for all cases. Comparison of Cu and Cd uptake for biomass and bentonite showed a lower biomass uptake capacity but a considerably higher affinity of the biosorbent for the solute. The presence of kaolinite and palygorskite in the medium generally reduced both Cu and Cd sorption capacity and the metal‐binding ability of the fungal–clay mixtures. In contrast, addition of bentonite into the medium did not appreciably alter the Cd sorption ability but increased the sorption of Cu by A pullulans and C cladosporioides grown in this medium. A common feature for all fungi grown in the presence of bentonite was an increase in the Cu sorption capacity (Q_max) of the biomineral sorbents and a reduction in their affinity (Langmuir parameter b) compared with control biomass. A difference between predicted and experimental data obtained for biomass grown on bentonite medium was also observed. The connection between the sorption capacity of biomass grown in clay‐containing medium, mycelial morphology and the structure of fungal pellets is discussed and a mechanism for the changed sorption capacity of the combined biomineral sorbents is proposed which involves blocking or modification of binding sites on biotic and abiotic components of the ‘biomineral’ association. © 2002 Society of Chemical Industry     

有限元数值试井解释技术在复杂断块油气藏评价中的应用

有限元数值模拟试井技术,可通过描述不同网格的瞬变压力对测试范围内各个小单元进行精细描述.综合运用解析试井、数值试井联带分析方法,将测试动态成果与地质静态成果有机结合、相互补充,可实现对复杂断块油气藏的精细描述,达到一口井搞清一个小型复杂断块油气藏的目的.     

Rational Synthesis of Metal Nanotubes and Nanowires from Lamellar Structures

A generic method has been developed for the synthesis of crystalline metal nanowires or nanotubes (such as bismuth nanotubes, tungsten nanowires) from lamellar structures. In a typical process, lamellar surfactant/inorganic composite precursors are first prepared by reacting cationic or anionic surfactants with inorganic species under appropriate conditions. After treating these precursors by hydrothermal pyrolysis, or other processes, crystalline metallic nanotubes or nanowires are obtained.     

An investigation of the unstable region for dense phase conveying in sliding bed flow

For fine powdered materials, capable of being conveyed in dense phase, a conveying region exists in which instability in flow and pipeline blockage can occur if the pressure gradient available is insufficient to maintain a minimum value of solids loading ratio. A reduction in material flow rate can also lead to pipeline blockage in this region. Conveying trials under-taken with cement are used to illustrate the nature of the problem.     

浅谈水闸安全检测

通过对华东沿海地区80年代以前修建的一些在役水闸工程的系统安全检测和分析,发现了水闸工程存在的安全隐患,同时也了解水闸工程尚有的潜在能力。提醒水闸管理部门,在役水闸满足目前社会发展需要的同时,还必须高度重视水闸的安全生产运行和管理。水闸安全检测就是利用先进的检测手段,为业主及时、高效、经济和高质量地解决水闸工程存在的实际问题。     

Influence of the Temperature of a Body on Its Weight

The physical preconditions are considered for the temperature of a body to influence the force of gravity experienced by it. The results are given of experiments on weighing metal rods heated by ultrasound which confirm a dependence of the weight of the rods on their temperature.     

Hydrogen Absorption and Release Behavior in Hydrogen Decrepitation Process of Nd-Fe-B Alloys

The behavior of hydrogen absorption and release in hydrogen decrepitation (HD) process of Nd-Fe-B alloys were investigated. The results reveal that the reactivity and the amount of hydrogen absorption in HD process are related to the surface activity of the alloy so that the fresh and active surface has a higher efficiency. The presence of Nd-rich phase at the grain boundary is an essential factor of the HD activity of the alloy at room temperature. On degassing, hydrogen is released from the HD powder continuously with increasing temperature. And the residual hydrogen is as low as 0.0015% at 1073K, which shows that the hydrogen is almost exhaused. It is feasible to remove the hydrogen from the HD powder by heating treatment at the temperature of 523-723K for 1h prior to the magnetic field forming in order to decrease the harmful effect of hydrogen on the easy axis alignment of HD magnet.