数据包络分析模型及其应用研究

通过对传统的C^2R模型进行研究并加以改进，建立了C2RHZ模型,利用有色金属矿采选业1993-2001年科技创新的相关数据进行了计算分析。说明了C^2RHZ模型的应用价值．     

In situ formation of multi scale reinforcing phases to improve performance of Al2O3-SiC C castables

In order to improve the physical properties and slag corrosion resistance of refractory materials for hot metal pretreatment, different contents of composite metal powders (CMP) were introduced into Al2O3-SiC-C refractory castables. The effect of CMP on the microstructure, physical properties and slag corrosion resistance of Al2O3-SiC-C refractory castables were studied. The results show that the multi scale reinforcing phases including flake crystals, rod shaped fibers, filamentous fibers and whiskers are in situ formed in the samples with addition of CMP, which result to the improvement of the cold modulus of rupture and cold crushing strength. When the addition of CMP is 6 wt.%, the high temperature modulus of rupture increases by 231%, the thermal shock resistance increases by 77% after thermal shock by water cooling 5 times and the percentage of the slag resistant area reduces by 37.2%.     

Learning to Predict Non-Deterministically Generated Strings

In this article we present an algorithm that learns to predict non-deterministically generated strings. The problem of learning to predict non-deterministically generated strings was raised by Dietterich and Michalski (1986). While their objective was to give heuristic techniques that could be used to rapidly and effectively learn to predict a somewhat limited class of strings, our objective is to give an algorithm which, though impractical, is capable of learning to predict a very general class. Our algorithm is meant to provide a general framework within which heuristic techniques can be effectively employed.     

新疆油田微生物开采稠油技术研究及矿场试验

通过室内筛选复壮,选育出对克拉玛依稠油具有显著降粘作用的微生物菌种.室内降粘实验结果表明,菌种对稠油的降粘率可达70%,同时菌种可以改善稠油的流体性质.原油族组分分析结果表明,菌种能够降解稠油中的非烃和长链饱和烃.首次在克拉玛依油田进行了6口井的微生物吞吐开采稠油矿场试验,累计增油865t.     

注射成形Fe-50%Ni软磁合金的研究

Fe-50 %Ni合金是一种典型的高磁导率和低矫顽力的软磁材料,有着广阔的应用前景.本次实验采用注射成形方法制取Fe-50 %Ni,研究了在注射成形工艺中烧结工艺对最终产品性能及微观组织的影响,并分析了影响产品磁性能的一些主要因素.实验表明,烧结温度的提高和烧结时间的延长能够较好改善产品的力学性能;密度是影响产品磁性能的主要因素,杂质(主要指(C、O、N)的含量和晶粒尺寸对剩磁、磁导率和矫顽力也有较大的影响;通过注射成形方法制取的Fe-50 %Ni,其性能要优于采用传统粉末冶金方法制造的Fe-50 %Ni.     

Co- and Ni-exchanged ferrierite: The contribution of synchrotron X-ray diffraction data to siting of TMIs

High-silica zeolites exchanged with transition metal ions (TMIs) are the subject of great interest for their unusual catalytic activity and selectivity. Structural information like coordination and accessibility of TMIs in zeolites are important factors for understanding their catalytic activity. Siting of TMIs in zeolites is typically obtained by spectroscopic (EXAFS, EPR, UV–vis and IR) and computational methods, as in the case of Co-ferrierite. However, some controversy exists in the literature concerning the model for incorporation of bare Co ions in ferrierite. We show here that the results of our synchrotron X-ray powder diffraction studies on Co- and Ni-exchanged ferrierite (Si/Al = 8.5) are in a good agreement with the model of Co siting based on an indirect spectroscopic approach and help to validate this model. By direct structural evidences, a possible explanation for the larger catalytic activity of Co sites in the main channels of ferrierite can be inferred. A combination of data from in situ XRD continuous monitoring of the Co ion migration during calcination and crystal-chemical considerations allows to device a strategy for the design of optimised co-cations containing Co-ferrierite catalysts.     

Formation and electronic structure of interface

In the present work the formation of the interface between polycrystalline silver and thin films of titanium oxide was studied with photoelectron spectroscopy (XPS, UPS) and time-of-flight secondary ion mass spectrometry (TOF-SIMS). Titanium oxide was deposited stepwise on 100 nm thick silver films by reactive magnetron sputtering allowing to study the evolution of the interface formation process. The process involves two steps: formation of thin layer of silver oxide and subsequent growth of the TiO₂ film. For better understanding of the silver oxidation process, pure silver films were exposed to a low temperature Ar/O plasma for different time intervals providing a possibility to investigate early stages of the oxide film growth.     

浅谈工程设计阶段的造价控制

文章主要介绍针对工程设计现状,分析工程造价失控原因,提出控制造价要点及方法,为有效控制工程造价提供探讨。     

微量元素对管道焊缝性能的改善

在焊条中添加微量元素Ce、Y、Ca、Ba和Zr，有利于改善石油天然气管道焊缝的金属性能，俄罗斯专家对此做了一系列实验和研究。结果表明添加微量元素有利于提高焊缝金属平面应变断裂韧性KIC，提高裂纹张开位移δc，减小裂纹扩展速率dα／dN改善焊缝金属的组织结构。通过大量的试验和研究，俄罗斯焊接学者确定了焊缝中微量元素的最佳含量，并建立了相关参数的数学模型。     

直流法测量钯氢化物电极电阻时的阻值偏移

讨论了直流法在线测量钯氢化物电极电阻时的电化学效应，计算了电解液的共导、测量电流与电解电流引起的浓差电池效应以及电极作为集流体引起的电阻贡献。结果表明：当电极具有高的长度与半径比值、粗糙的表面、高的溶液电导以及大的电解电流时容易引起显著的附加电阻。