多弧离子镀与磁控溅射共沉积TiN/TiCN多层膜的高温抗氧化性能

TiN/TiCN多层膜的高温抗氧化性研究对于扩大其应用领域具有重要作用,但目前鲜见相关报道。采用多弧离子镀与磁控溅射技术以不同调制周期在304不锈钢表面共沉积TiN/TiCN多层膜。采用XRD、XPS、倒置显微镜及高温氧化试验研究了多层膜的高温抗氧化行为。结果表明:TiN/TiCN多层膜表面光滑平整、均匀致密,薄膜主要为具有Ti-(C,N)键的fcc-TiN结构;随着调制周期的减小,TiN/TiCN多层膜生长取向发生转变,且具有(111)晶面生长织构;随着氧化温度的升高,多层膜的显微硬度逐渐降低,氧化增重速率不断增大,且在700℃之后变化速率较快,薄膜的开始氧化温度约为750℃;随着调制周期的减小,多层膜TiN与TiCN界面层数量增多,促使晶粒细化,提高了其致密性,还隔断了缺陷贯穿薄膜的连续性,显著降低了薄膜的孔隙率,致使O原子扩散困难,增强了薄膜的高温抗氧化性能。     

西南桦木包装材料在热处理后的润湿性能研究

通过动态接触角测量、红外光谱分析、表面粗糙度测量、扫描电镜观察和偏相关分析,研究了西南桦木的润湿性能。结果表明,木材经180℃热处理4 h后,润湿性能下降:接触角由40°增至121°,羟基和羰基数量减少,粗糙度降低;处理时间与接触角显著相关;西南桦木用作包装材料,若采用热处理,可去除有害生物,还具备疏水功能。     

Scattering of phonons by vacancies

The scattering of phonons by vacancies is estimated by a perturbation technique in terms of the missing mass and the missing linkages. An argument is given why distortion effects can be disregarded. The resonance frequency of the defect is sufficiently high so that resonance effects can be disregarded for phonons in the important frequency range for thermal conduction. The theory is applied to the thermal resistance by vacancies in cases where the vacancy concentration is known: potassium chloride with divalent cations, nonstoichiometric zirconium carbide, and tin telluride.     

多菌灵抗性基因在球毛壳中的转化

利用PEG方法将多菌灵抗性基因通过质粒pRB129转化到球毛壳原生质体，并在含0.5μg/ml多菌灵浓度下筛选转化子，转化率可达6－7个转化子／μgDNA。转化子可在1000μg/ml多菌灵处理条件下正常生长。将转化子在非选择压力下连续培养10代，其抗性稳定不变。     

Characteristics of electrocodeposited Ni-Co-SiC composite coating

Electrodeposited composites are gaining importance for their advantages including low cost, ease and simplicity of operation to tailor made coatings for tribological applications. Generally, composites containing carbides (like SiC) are preferred for high wear resistance along with increased hardness, improved corrosion resistance, and high temperature oxidation resistance as compared to alloy and pure metal electroplating. In the present work, electrolytic codeposition technique was adopted in the deposition of Ni-Co-SiC composite coating on mild steel substrate, using nickel alloyed with cobalt as the binder phase with SiC as dispersed particles. To improve the properties of coating further, Cr plating was also performed. Since the particle size and volume percent variation of dispersoid have great importance in codeposition, so the effect of these two variables on the process of codeposition and properties was observed. Morphological studies of Ni-Co-SiC coating were carried out with scanning electron microscopy and X-ray diffraction analysis to correlate the mechanical and corrosion behaviour of the coating.     

Optical, electrical and structural characteristics of Al:ZnO thin films with various thicknesses deposited by DC sputtering at room temperature and annealed in air or vacuum

Transparent and conductive Al-doped ZnO (AZO) films have been grown with various thicknesses between 0.3 and 1.1 μm by magnetron sputtering at room temperature onto soda lime glass substrates. After deposition, the samples have been annealed at temperatures ranging from 150 to 450 °C in air or vacuum. The optical, electrical, and structural characteristics of the AZO coatings have been analyzed as a function of the film thickness and the annealing parameters by spectrophotometry, Hall effect measurements, and X-ray diffraction. As-grown layers are found polycrystalline, with hexagonal structure that shows some elongation of the unit cells along the c-axis, having visible transmittance ∼85-90% and resistivity ∼1.6-2.0 mΩ cm, both parameters slightly decreasing when the film thickness increases. Heating in air or vacuum produces further elongation of the crystalline lattice together with some increase of the visible transmittance and a decrease of the electrical resistance that depends on the heating temperature and atmosphere. The best characteristics have been obtained after treatment in vacuum at 350 °C, where the highest carrier concentrations are achieved, giving visible transmittance ∼90-95% and resistivity ∼0.8-0.9 mΩ cm for the AZO layers with various thicknesses. Some relationships between the analyzed properties have been established, showing the dependence of the lattice distortion, the band gap energy and the mobility on the carrier concentration.     

New Beta-lactamases in Candidate Phyla Radiation: Owning Pleiotropic Enzymes Is a Smart Paradigm for Microorganisms with a Reduced Genome

The increased exploitation of microbial sequencing methods has shed light on the high diversity of new microorganisms named Candidate Phyla Radiation (CPR). CPR are mainly detected via 16S rRNA/metabarcoding analyses or metagenomics and are found to be abundant in all environments and present in different human microbiomes. These microbes, characterized by their symbiotic/epiparasitic lifestyle with bacteria, are directly exposed to competition with other microorganisms sharing the same ecological niche. Recently, a rich repertoire of enzymes with antibiotic resistance activity has been found in CPR genomes by using an in silico adapted screening strategy. This reservoir has shown a high prevalence of putative beta-lactamase-encoding genes. We expressed and purified five putative beta-lactamase sequences having the essential domains and functional motifs from class A and class B beta-lactamase. Their enzymatic activities were tested against various beta-lactam substrates using liquid chromatography-mass spectrometry (LC-MS) and showed some beta-lactamase activity even in the presence of a beta-lactamase inhibitor. In addition, ribonuclease activity was demonstrated against RNA that was not inhibited by sulbactam and EDTA. None of these proteins could degrade single- and double-stranded-DNA. This study is the first to express and test putative CPR beta-lactamase protein sequences in vitro. Our findings highlight that the reduced genomes of CPR members harbor sequences encoding for beta-lactamases known to be multifunction hydrolase enzymes.     

单片机控制的托辊阻力参数及加载测试仪硬软件系统研发

论述了托辊阻力参数硬件测试系统的组成及工作过程,进行了系统硬件的电气原理电路的设计和测试软件系统及数据处理应用程序的设计。