水热合成六方柱状氧化锌及其光催化性能研究

以二水醋酸锌和六次甲基四胺为原料,采用温和水热法制备了六方柱状ZnO。采用X射线衍射(XRD)、扫描电镜(SEM)和紫外可见光谱对其物相、形貌和光催化性能进行了分析,着重研究了不同的反应条件对ZnO形貌的影响,探讨了六方柱状ZnO的形成机理。结果表明:溶液浓度、pH值、反应温度和反应时间对生成晶体的形貌和晶体质量都会产生影响。制备结晶良好的ZnO的最佳反应条件为:反应液浓度为0.57mol/L,pH值为6.0,反应温度为97℃,反应时间为16h。六方柱状ZnO晶体的形成机理是在一定的水热条件下,醋酸锌与六次甲基四胺水解后形成晶核,由于(0001)晶面的生长速率大于其它晶面,以及(0001)晶面易俘获原子,使得成核后的ZnO沿(0001)面定向生长,最终形成六方柱状结构。     

MnZn铁氧体磁心烧结裂纹成因浅探

MnZn铁氧体磁心生产过程较复杂,裂纹是导致质量问题的重要因素。笔者针对导致烧结裂纹的各种原因进行了分析,并根据生产实践经验提出了一些解决办法。     

水热法合成锰锌铁氧体纳米球包覆的碳纳米管磁性材料的研究

用水热法分别在160℃和220℃下反应5 h制备了锰锌铁氧体纳米球包覆的碳纳米管复合材料。用X射线衍射分析样品的物相,用高分辨透射电镜和电子衍射分析样品的形貌和结构,用振动样品磁强计表征磁性能。结果表明：锰锌铁氧体为球形,粒径约为13 nm。磁滞回线结果表明：复合材料粒子的饱和磁化强度为10.92 em u/g,剩磁为4.25 em u/g,矫顽力为381.43O e。     

Synthesis and characterization of magnetic nanocomposites of fullerene‐containing polyurethane films for microwave applications

Novel nanocomposites of barium hexaferrite‐ and fullerene‐containing polyurethane were synthesized and characterized by scanning electron microscopy, transmission electron microscopy, X‐ray diffractometry, and energy‐dispersive X‐ray diffraction. The nanoparticles showed good dispersion in the polyurethane matrix. Their thermal, mechanical, and electromagnetic absorbance properties were studied. The complex permeability and permittivity were measured in the frequency range of 8.2–12.4 GHz. The maximum reflection loss of the nanocomposites was found to increase with increasing the ferrite content from 1% to 5%, with maximum value of −7.5 dB at only 5% composition. The incorporation of nanofiller not only imparts mechanical strength to the nanocomposite but also shows good radar‐absorbing properties at only 5% filler concentration. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and magnetic properties of nano-sized Cu0.5Ni0.5Fe2O4 via citrate and aloe vera: A comparative study

In this report, Cu_0.5Ni_0.5Fe₂O₄ nanoparticles were synthesized by solgel using eco-friendly aloe vera extract and citric acid separately and their properties were discussed. Structural, Functional, morphological, magnetic properties of the samples were characterized using X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Transmission electron microscopy (TEM), Vibrating sample magnetometer (VSM). XRD exhibited the samples have single phase cubic spinel with average size of 46.4?nm and 35.45?nm. Two characteristics bands of ferrite were confirmed by FTIR. TEM indicated different morphology of the samples with some regularity. VSM data showed that higher coercivity for the sample prepared by aloe vera extract.     

Structural,magnetic and magnetostrictive properties of Co1-xLixFe2O4 synthesized by cathode materials of spent Li-ion batteries

In this study, we investigated the effects of substituting Li⁺ for Co²⁺ at the B sites of the spinel lattice on the structural, magnetic and magnetostrictive properties of cobalt ferrites. The Li⁺ substituted cobalt ferrites, Co_1-xLi_xFe₂O₄, with x varying from 0 to 0.7 in 0.1 increments, were synthesized with a sol-gel auto-combustion method using the cathode materials of spent Li-ion batteries. X-ray diffraction analysis revealed that all the Co_1-xLi_xFe₂O₄ nanopowders had a single-phase spinel structure and the lattice parameters decreased with increasing Li⁺ content, which can be proved by slight shifts towards higher diffraction angle values of the (311) peak. Field emission scanning electron microscopy was used to observe the fractured inner surface of the sintered cylindrical rods and the increased porosity resulted in a decreased magnetostriction. The oxidation states of Co and Fe in the cobalt ferrite samples were examined by X-ray photoelectron spectroscopy. High resolution transmission electron microscopy micrographs showed that most particles were roughly spherical and with sizes of 25–35?nm. Li⁺ substitution had a strong effect on the saturation magnetization and coercivity, which were characterized with a vibrating sample magnetometer. The Curie temperature was reduced due to the decrease in magnetic cations and the weakening of the exchange interactions. The magnetostrictive properties were influenced by the incorporation of Li⁺ at the B sites of the spinel structure and correlated with the changes in porosity, magnetocrystalline anisotropy and the cation distribution.     

超重力液相沉淀法制备纳米铁酸钴

针对磁力搅拌器制备纳米材料时存在粒径分布宽、分散不均匀的问题,采用撞击流-旋转填料床结合化学共沉淀法,以Fe（NO₃）₃·9H₂O、Co（NO₃）₂·6H₂O、NaOH为原料制备CoFe₂O₄纳米颗粒。研究了转速、液体流量、NaOH浓度以及晶化时间对CoFe₂O₄纳米颗粒粒径的影响;并与磁力搅拌器制备的CoFe₂O₄纳米颗粒在磁性能方面进行了对比。采用X射线衍射仪（XRD）、傅里叶红外光谱仪（FTIR）、透射电镜（TEM）、纳米粒度仪及振动样品磁强计（VSM）对产物的粒径形貌及磁性能进行表征。结果表明：CoFe₂O₄纳米颗粒的粒径随转速、液体流量和NaOH浓度的增加而减小,但随晶化时间的增加而增大。最佳工艺条件为：转速900r/min,液体流量60L/h,NaOH浓度3mol/L,晶化时间6h。此条件下制备的CoFe₂O₄纳米颗粒的粒径约为20nm,饱和磁化强度为75.43emu/g,较磁力搅拌器提高40%。     

纳米Mn-Zn铁氧体电磁吸波水泥基材料的制备与性能

利用化学共沉淀法制备纳米Mn-Zn铁氧体磁流体,再以一定比例将其掺入水泥浆体制备吸波层,以膨胀珍珠岩作为匹配层,制备双层水泥基吸波材料,研究了不同纳米组分掺入量对该种水泥基材料吸波性能的影响.结果表明:纳米Mn-Zn铁氧体吸波砂浆在厚度(20+10)mm、掺量7%时,在8~18 GHz频段内反射率都小于-10 dB,最小反射率为18 GHz处的-15.1 dB.     

Synthesis and characterization of CePO4 nanorods via solvothermal process

One-dimensional cerium phosphate(CePO4) nanorods were successfully synthesized by a facile and simple solvothermal method at 150 ℃ for 12 h, using Ce(NO3)3·6H2O and NaH2PO4·2H2O as the starting materials. Phase and morphologie of the as-synthesized CePO4 products, characterized by XRD, FESEM, and TEM, were proved to be perfect and uniform hexagonal CePO4 nanorods with aspect ratio of more than 100. The photoluminescence(PL) spectrometer was used to investigate the optical properties of the assynthesized hexagonal CePO4 nanorods.     

拉弧焊接的组织结构与性能分析

栓钉拉弧焊机是一套大功率的直流电焊机,它可以焊接直径为Φ20-10mm的栓钉。该焊机焊接的焊件抗拉强度较高,并且焊缝致密,焊脚完整,已在工程建筑上得到应用。