石油化工生产火灾危险性分析

针对石油化工生产的特点,从物料特性、上艺装置、工艺控制参数、防火防爆安全装置、作业性质和消防安全设施等几方面综合分析其火灾危险性,并提出相应的防范措施,为消防安全评价提供依据。     

多带抗噪声语音识别算法研究

根据Flether等人的研究,基于感知独立性假设的子带识别方法被用于抗噪声鲁棒语音识别。本文拓展子带方法,采用基于噪声污染假定的多带框架来减少噪声影响。论文不仅从理论上分析了噪声污染假定多带框架在识别性能上的潜在优势,而且提出了多带环境下的鲁棒语音识别算法。研究表明：多带框架不仅回避了独立感知假设要求,而且与子带方法相比,多带方法能更好的减少噪声影响,提高系统识别性能。     

On the effects of the packet size distribution on the packet loss process

Real-time multimedia applications have to use forward error correction (FEC) anderror concealment techniques to cope with losses in today’s best-effort Internet. The efficiency of these solutions is known however to depend on the correlation between losses in the media stream. In this paper we investigate how the packet size distribution affects the packet loss process, that is, the distribution of the number of lost packets in a block, the related FEC performance and the average loss run length. We present mathematical models for the loss process of the MMPP+M/D/1/K and the MMPP+M/M/1/K queues; we validate the models via simulations, and compare the results to simulation results with an MPEG-4 coded video trace. We conclude that the deterministic packet size distribution (PSD) not only results in lower stationary loss probability than the exponential one, but also gives a less correlated loss process, both at a particular average link load and at a particular stationary loss probability as seen by the media stream.Our results show that for applications that can only measure the packet loss probability, the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior. Our results show that the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior and thus can improve the queuing performance by decreasing the variance of its PSD.     

多业务移动通信系统中的呼叫接入控制

在多业务无线移动通信系统的呼叫接入控制中,不仅要考虑业务之间的优先级,同时也必须考虑切换呼叫的优先级。本文结合可移动边界算法和保护信道策略,提出了一种有效的多业务呼叫接入控制算法。为了方便地分析方案的性能,设计了一个二维的Markov链对方案的性能进行理论上的分析。通过数值分析结果表明,提出的算法同时保证了两种优先级,并提高了系统的性能。1     

Quantitative pharmacophore models with inductive logic programming

Three-dimensional models, or pharmacophores, describing Euclidean constraints on the location on small molecules of functional groups (like hydrophobic groups, hydrogen acceptors and donors, etc.), are often used in drug design to describe the medicinal activity of potential drugs (or ‘ligands’). This medicinal activity is produced by interaction of the functional groups on the ligand with a binding site on a target protein. In identifying structure-activity relations of this kind there are three principal issues: (1) It is often difficult to “align” the ligands in order to identify common structural properties that may be responsible for activity; (2) Ligands in solution can adopt different shapes (or `conformations’) arising from torsional rotations about bonds. The 3-D molecular substructure is typically sought on one or more low-energy conformers; and (3) Pharmacophore models must, ideally, predict medicinal activity on some quantitative scale. It has been shown that the logical representation adopted by Inductive Logic Programming (ILP) naturally resolves many of the difficulties associated with the alignment and multi-conformation issues. However, the predictions of models constructed by ILP have hitherto only been nominal, predicting medicinal activity to be present or absent. In this paper, we investigate the construction of two kinds of quantitative pharmacophoric models with ILP: (a) Models that predict the probability that a ligand is “active”; and (b) Models that predict the actual medicinal activity of a ligand. Quantitative predictions are obtained by the utilising the following statistical procedures as background knowledge: logistic regression and naive Bayes, for probability prediction; linear and kernel regression, for activity prediction. The multi-conformation issue and, more generally, the relational representation used by ILP results in some special difficulties in the use of any statistical procedure. We present the principal issues and some solutions. Specifically, using data on the inhibition of the protease Thermolysin, we demonstrate that it is possible for an ILP program to construct good quantitative structure-activity models. We also comment on the relationship of this work to other recent developments in statistical relational learning. Editors: Tamás Horváth and Akihiro Yamamoto     

The Influence and Interpretation of Surface Parameters for Wetting Transitions in Ternary Mixtures

Starting from a microscopic Hamiltonian defined on a semi-infinite cubic lattice, and employing a mean-field approximation, the surface parameters relevant for wetting in confined ternary mixtures are derived. These are found in terms of the microscopic coupling constants, and yield a physical interpretation of their origins. In comparison with the standard expression for the surface free-energy density, several new terms arising from the derivation are identified. The influence of the surface parameters on a predicted unbinding transition in a mixture of oil, water, and amphiphile demonstrate that existing results are robust to the addition of the extra surface terms.     

River Bifurcation Analysis by Physical and Numerical Modeling

In the framework of a river regulation design of the Po River Delta (Northern Italy), a study on a large physical model of the bifurcation Po di Goro-Po di Venezia was conducted with the main objective of determining the discharge subdivision rate at the river node, in order to assess the inflow conditions in the Po di Goro River for flood risk analysis. In this context, a two-dimensional depth averaged numerical model was tested against measured values, with reference to the prototype. In this paper a comprehensive analysis and discussion of the results is reported in order to highlight the applicability of numerical models in comparison with physical ones in river engineering applications.     

Quality Control for Scalable Media Processing Applications

Many media processing applications create a load that varies significantly over time. Hence, if such an application is assigned a lower processing-time budget than needed in its worst-case load situation, deadline misses are likely to occur. This problem can be dealt with by designing media processing applications in a scalable fashion. A scalable media processing application can run in multiple qualities, leading to correspondingly different resource demands. The problem we consider is to find an accompanying quality control strategy, which minimizes both the number of deadline misses and the number of quality changes, while maximizing the quality of processing. We present an initial approach to the above problem by modeling it as a Markov decision process (MDP). Our model is based on measuring relative progress at milestones. Solving the MDP results in a quality control strategy that can be applied during runtime with only little overhead. We evaluate our approach by means of a practical example, which concerns a scalable MPEG-2 decoder.     

一个新颖的轮廓线跟踪算法

提出了一个新颖的基于隐马尔科夫模型与光流的轮廓线跟踪算法。曲线描绘由B样条形状空间向量来表达,能够捕捉全局和局部变形。提出应用沿曲线的光流计算来预测曲线在下一帧的位置,在预测曲线的基础上,提出应用隐马尔科夫模型来准确定位曲线的位置。隐马尔科夫模型提供了一种有效的概率手段来融合多种量测特征比如边缘,曲线平滑性,区域灰度或颜色统计信息等等,能够更准确的定位曲线位置。基于仿射形状空间的实验了表明本文所提出算法的有效性。     

抗洪抢险措施及效果

结合“９８”抗洪抢险实例，对多种险情作了具体分析，通过汛后调查，对抗洪抢险消险措施和效果进行了总结，为今后进一步做好防洪消险工作提供了经验。