PVC薄膜—尼龙织物复合用胶粘剂的研制

介绍 PVC 薄膜—尼龙织物复合用胶粘剂试制的情况。主要包含胶粘剂主体聚合物、增粘组分、增塑剂、反应促进剂及其它助剂的选择。并阐述了胶粘剂的放大试验情况及应用工艺条件。     

化学镀Ni-P-PTFE复合镀层的性能

本文对化学镀ＮｉＰＰＴＦＥ复合镀层的性能作了测定和评价。实验表明，用优化的镀液配方和工艺可获得含ＰＴＦＥ粒子２５～３０％ｖｏｌ的ＮｉＰＰＴＦＥ复合镀层。这种镀层具有优良的结合力和良好的耐蚀性，其硬度随ＰＴＦＥ含量增加而降低，其特别突出的性能是优异的减摩性和耐磨性，是一种具有自润滑功能的表面复合材料。     

Advanced Coatings on Furnace Wall Tubes

Nickel-based self-fluxing alloy coating extends the service life of furnace wall tubes at waste incineration plants due to its excellent corrosion resistance and heat resistance. Fusing of such coatings by induction heating offers improved efficiency and reliability of products. Compared with conventional plasma, flame, and high-velocity oxy-fuel spraying thermal-sprayed coatings, induction-fused coatings provide a far stronger metallurgical bond at the interface, while minimizing the inclusion of pores. In addition, the tubes are less costly than those with welded coatings, and the process reduces the distortion of the products, facilitating easier final assembly. A successful experimental application of 11 units in a waste incinerator revealed virtually no corrosion on the exposed surfaces, and showed an improved water heating efficiency over that of the original tubes. Such units are now being employed in four incinerators in Taiwan, and continuing tests are showing great promise.     

Evaluation of different coating systems by electrochemical methods

Corrosion protection of organic coated steel is determined by free corrosion potential measurements and impedance spectroscopy. The results are classified by means of very basic considerations and evaluation figures are developed. These electrochemical data are correlated with the extent of the corrosion for each coating system. The evaluation figures are used for ranking coating systems and this ranking is correlated with the ranking with reference to the results of standardized and exposure tests.     

Anaerobic digestion of alkaline black liquor using an up-flow anaerobic sludge blanket reactor

The anaerobic digestion of alkaline black liquor from a cereal straw pulping mill was studied in batch (serum bottles) and continuous systems (up-flow anaerobic sludge blanket reactor—UASB). The batch digestion studies confirmed that lignin and related compounds (LRC) in the alkaline black liquor were the main inhibitory substances and could not be decomposed by anaerobic bacteria. At organic loading rates of 5–10 kg COD m^?3 day^?1, the UASB reactor achieved 50–60% COD removal efficiencies. Gas production was 2–3 dm³ per dm³ of alkaline black liquor. Two different sludge types were examined in the reactor: granular and cluster-like sludges. Sludge in a cluster, which involved many small granules and flocs, tended to form larger aggregates and possessed good settling ability.     

多用户MIMO系统低复杂度收发联合波束成形方案

基于多用户多输入多输出(MIMO)有限反馈系统提出了一种收发联合波束成形方法。该方法在发送端采用每个用户酉速率控制(PU2RC)波束成形技术,在接收端采用基于信干噪比(SINR)最大化的天线合并算法。天线合并算法利用用户SINR的广义Rayleigh熵特性寻找最佳的天线合并矢量。仿真结果表明,该方法能充分利用信道信息,不仅改善了传统PU2RC系统的和速率性能,相对于已有的迫零(ZF)联合波束成形方法,对信道状态信息的量化误差的敏感性更低,用户选择算法的复杂度更低,且低速率反馈条件下和速率性能更优。     

Preparation of micro-arc oxidation coatings on magnesium alloy and its thermal shock resistance property

1. Introduction Due to their high specific strength, good electro-magnetic shielding characteristics, high damping characteristics, good cast ability, and excellent pol-ishing capability, magnesium alloys are extensively used in aeronautical, automobile, and electro- communication industries [1-3]. But magnesium has some disadvantages, such as low chemical stability, high negative electric potential, and low hardness, so it is necessary to use surface disposal to accommo-date the demand for re…     

用微量元素涂料改善球铁件热节组织的试验研究

对RE、Tc、Bi、Sb等微量元素以涂料形式对球铁件厚大热节部位进行微合金化,以改善其组织的可能性进行了试验研究,结果表明:多元微量元素涂料可有效地消除碎块状石墨,提高球化率,改善球铁组织,涂料层厚度影响微合金化程度而应严格控制,该工艺具有简便。无炉料污染、可代替冷铁以确保复杂铸件组织均一等优点。     

电流密度对声电沉积生物活性透钙磷石涂层结构和形貌的影响

通过声电沉积工艺在碳／碳复合材料表面制备了生物活性透钙磷石涂层，采用SEM、FFIR、XRD研究了超声场中电流密度对涂层组成结构和形貌的影响。发现在一定工艺条件下，随电流密度增加，涂层的平均晶粒尺寸减小，致密度增加；当电流密度小于l0mA／cm^2时涂层形貌为片状，l0mA／cm^2-26mA／cm^2时为粒状，32mA／cm^2时为花菜心状。且涂层中透钙磷石晶体的择优取向也发生变化，择优晶面依次为(021)、(111)、(220)。同时还讨论了涂层微观结构变化机理。