重钢高线轧机生产工艺设计

在原有国产高线轧机基础上,经改进,如采用新型闭口式轧机,超高速机架,顶交无扭精轧机组等。为重钢高线车间进行了设计,终轧保证速度达到８０ｍ／ｓ,使我国高线轧机国产化达到了新阶段。     

宝钢高速线材轧机的产品现状及展望

介绍了具有当前国际线材生产先进水平的宝钢高速线材轧机的产品特点，及该轧机自投产至今的产品开发情况，并对今后新产品开发工作进行了展望。     

电磁成形中的测量

本文简要介绍了电磁成形中放电电流、管坯与线圈间隙中的磁场测量 ,以及管坯动态变形过程测量的各种方法。通过各种方法的比较分析 ,得出分流器法测放电电流、探测线圈法测感生磁场是切实可行的方法。金属坯料在电磁力作用下的变形过程可用撞针法和高速摄影的办法进行测量 ,每种方法各有其优势和适用范围 ,测量时 ,根据实际情况进行选用。     

高速混合法在共混地膜生产中的应用

介绍了在原有吹制LDPE地膜设备上(挤出机长径比为20:1)吹制LDPE、LLDPE和HDPE共混微膜和超薄微膜,采用高速混合法的混料工艺达到了良好的预热效果,弥补了挤出机长径比小的不足。     

Dynamic compensation by fusing a high-speed actuator and high-speed visual feedback with its application to fast peg-and-hole alignment

This paper presents a dynamic compensation concept to grapple with the dynamic defects of a traditional robot arm, especially while performing high-speed endpoint regulations. The proposed high-speed dynamic compensation concept offers a new point of view for cooperating with a traditional manipulator to realize highly dexterous performance of manipulations. The concept is realized through adoption of a high-speed light-weight actuator as well as endpoint closed loop configured high-speed cameras. The dynamic compensation is analyzed experimentally with 1000 Hz visual feedback and a high-speed finger for a robot arm in the case of one degree of freedom. The advantage of the proposed approach is that the modeling for the robot system’s dynamics is not needed, whereas it is necessary and trivial in order to realize high-speed regulations by traditional approaches. Thus, the control issue becomes easier with the proposed approach. As an application for this concept, fast peg-and-hole alignment with large position and attitude uncertainty is studied. The alignment algorithm is based on a visual compliance strategy. Alignment experiments show that with the proposed concept of dynamic compensation as well as visual compliant motion control, robust and fast convergence was realized for most cases.     

高速以太网中实时相似性匹配算法的研究

在高速以太网中, 针对用户行为的特殊性及数据流五元组的特点, 提出了一种自适应相似性匹配算法(ASMA-HN)。该算法充分考虑了数据流五元组的随机性分布特点, 通过一种改进的XOR-SHIFT算法将数据流分类索引, 并提出了同类数据库(SD)及异类数据库(HD)的概念, 基于距离测度分别设计了加权相似性比较函数, 使得特征值能更精准地匹配到符合要求的数据文件, 提高了整体的匹配效率。通过对校园网实际流量的现场测试, 证明该算法具有较高的精准性及可适用性, 且匹配时间较低, 能很好地满足高速网络中相似性匹配业务的需求。     

HiSLIP协议的研究与应用

为解决无LAN口仪器仪表网络接入问题,仪器的网络代理应运而生。当前网络代理的仪器控制机制主要基于TCP/UDP协议,仪器控制及网络传输数据效率较低,为此,IVI联盟制定了标准的仪器控制协议HiSLIP。通过对该协议的功能和交互过程的详细分析,根据协议规范实现协议的运行代码,并基于此协议设计出仪器网络代理,可以实现对支持VXI仪器的便捷网络接入和高效控制,降低通信时延和网络带宽对仪器测量的影响,满足网络化测控系统中对仪器实时性的要求。     

不同制备方法所得PEN纤维的结构性能比较

利用高速纺丝法与纺丝拉伸一步法两种不同的方法制备聚萘二甲酸乙二酯 ( PEN)纤维 ,以DSC、X射线衍射、声速、力学测试等手段分析其结构、热学及力学性能并进行比较。结果表明 :以上两种纺丝法所制备 PEN纤维的晶型、晶粒尺寸不同 ;在所采用的高速纺丝速度范围内 ,分别以 6,7,8km/m in的速度纺制的试样结构性能基本相同 ;而纺丝拉伸一步法中不同的拉伸倍数对纤维的取向度影响较大 ,进而使杨氏模量、断裂强度和断裂伸长率变化较大     

基于STeC的高速列车运行模型与算法

为了使高速列车正点运行到达目的车站,提出了基于STeC(时空一致性)语言的高速列车运行模型与算法。该模型具有位置触发自动调整高速列车运行的特点,实现动态确定高速列车制动点并保证列车正点到达目的车站,从而满足了高速列车运行实时系统对时间和空间的一致性要求。通过Matlab/Simulink的仿真测试,证明了该模型的正确性和有效性。     

Accurate High-speed Assembly of Optical Components in Optical Scanning Systems using UV-curing Adhesives: A Positional and Stability Study

In the miniaturized designs of optical scanning systems, UV-curing adhesives have been substituted for screws and bolts. The assembly of delicate optical components enforces stringent requirements on positional accuracy and stability after temperature and humidity cycle testing. The influence of the UV-curing adhesive is mainly determined by its polymerization shrinkage (typically more than 6%). With low amounts of Aerosil® fillers (5% by weight), shrinkage values of 3% can be attained. Optimized adhesive constructions lead to close positional tolerances (0.5 μm) and angular displacements (0.1 mrad).