Interaction between erosion and high-temperature corrosion of metals: The erosion-affected oxidation regime

The combined erosion-oxidation of nickel, cobalt, and the oxides of these metals have been studied at 780°C in air to examine two regimes of interactionnamely, a regime of erosion-enhanced oxidation during which an oxide scale of constant thickness covers metal specimens, and a regime of oxidation-affected erosion that is characterized by a composite surface layer of metal, oxide, and erodent. In the case of cobalt, these two regimes have been documented and the transition from one regime to another described. For the range of conditions examined, only the oxidation-affected erosion regime was observed for nickel due to its lower oxidation rate compared to cobalt.     

ZrB2-SiC基超高温陶瓷（UHTCs）的反应烧结及SHS粉体制备

用普通反应热压方法（RHP）和反应放电等离子体方法（R-SPS）原位反应制备了ZrB2-SiC，ZrB2-SiC—ZrC，ZrB2-SiC-ZrN，以及ZrB2-SiC-AIN4种复合材料。从密度，物相以及显微结构等方面比较了两种烧结方式之间的差别，对于升温速度较慢的普通热压方法，反应分步进行，显微结构不均匀；对于升温速度快的放电等离子体烧结，原料间的自蔓延反应被点着，反应速度快，显微结构均匀。同时以红外灯的热量为点火源，引发了Zr，Si及B4C间在空气气氛下的自蔓延反应，制备了较纯及粒径约为1μm的活性粉体。     

金属间化合物TiAl(W,Si,B)合金的组织稳定性及其蠕变性能

Ti-45Al-2W-0.5Si-0.5B(ABB-23)铸造合金在800和900℃长期时效过程中发生组织失稳，包括α2板条断裂和合并，α2相转变为B2相，针状B2相球化和长大，γ等轴晶的生成以及片层间距的增加。ABB－23合金的热稳定性优于无B的ABB－2合金，表明添加B有利于提高合金的热稳定性。ABB－23合金在700－800℃范围内的抗蠕变能力超过同比密度的抗热腐蚀高温合金IN738LC，具有优异的高温蠕变性能。此外，还对比了ABB－23合金与其他几种TiAl基合金的高温蠕变性能。     

B113－2型低汽／气比CO高温变换催化剂的研制

介绍了Ｂ１１３－２Ｍ低汽／气比ＣＯ高温变换催化剂的研制方法及其特点．实验室测试表明，Ｂ１１３－２型催化剂具有堆密度低、运行强度高、选择性好、抗沸水性能优、本体含硫低及低温活性好等优点．     

TiC－Al_2O_3复合材料的自蔓延高温合成和致密化

以ＴｉＯ＿２，Ａｌ和Ｃ三种粉末为原料，采用自蔓延高温合成和加压的方法制备了ＴｉＣ－Ａｌ＿２Ｏ＿３复合材料。在１ＧＰａ压力下，可使样品达到理论密度的９５％。对未反应样品燃烧前在真空状态下预热脱气，则密度可达９８％。为避免样品开裂，必须控制冷却速度。对合成产品进行了Ｘ射线分析，表明从ＴｉＯ＿２，Ａｌ，和Ｃ三种粉末原料制备密实的ＴｉＣ－Ａｌ＿２Ｏ＿３复合材料是可能的。     

TiB2的SHS合成过程理论分析

在ＴｉＢ２陶瓷材料的自蔓延高温合成（简称ＳＨＳ）过程中，通过改变原料的起始温度，稀释剂的含量和原始颗粒的尺寸等都可以调节合成过程的绝热温度，产物中熔融相的含量，以及燃烧波蔓延的速度，人而最终影响合成产物的结构和性质。本文对上述各种关系进行了理论计算和分析，其结果对实际合成与制备过程将有着重要的指导作用。     

Reaction products of ammonium nitrate phosphate fertilizers of varying water-soluble phosphorus content in different Indian soils

Studies were undertaken on the isolation and identification of reaction products of ammonium nitrate phosphate (ANP) fertilizers containing 30, 50 and 70 per cent water-soluble phosphorus (WSP) of total phosphorus in representative soils of the vertisol, oxisol, alfisol, entisol, mollisol and aridisol groups of India. ANP fertilizers were applied in solid form to soil, and reaction products formed at and around the site of ANP fertilizer placement were identified after six weeks incubation in moist soils by X-ray diffraction technique. DCPD (dicalcium phosphate dihydrate- CaHPO₄ · 2H₂O) was the major reaction product of ANP fertilizers containing 30 and 50 per cent WSP in vertisol, entisol, aridisol, mollisol, oxisol and alfisol, and of ANP containing 70 per cent WSP in vertisol, entisol, alfisol, aridisol and mollisol. DCP (dicalcium phosphate-CaHPO₄) was detected with ANP of 30 and 50 per cent WSP in the vertisol, alfisol, entisol, mollisol and aridisol groups of soils. In addition to DCPD, FePO₄ · 2H₂O (metastrengite) and AlPO₄ · 2H₂ O-monoclinic (metavariscite) were formed in alfisol and oxisol soils with ANP of 30 and 50 per cent WSP. FePO₄ · 2H₂O and AlPO₄ · 2H₂O (metavariscite) were identified in alfisol and oxisol soils while AlPO₄ · 2H₂O-orthorhombic (variscite) was formed in alfisol soils with ANP of 70 per cent WSP.     

PAA·2HC1—RH体系引发DMDAAC—AM共聚合的动力学研究

合成了二甲基二烯丙基氯化铵—丙烯酰胺共聚物 ,测定了水溶性偶氮化合物 -RH引发体系 (PAA·2HCl-RH)和过硫酸钾 -RH引发体系 (KPS -RH)引发共聚反应时单体DM和AM的竞聚率 ,以及PAA·2HCl-RH体系用于DM -AM共聚时的活化能。结果表明 :PAA·2HCl-RH引发DM -AM共聚时 ,DM和AM的竞聚率分别为 0 .174和 6 .8,活化能为 33.2 5kJ/mol;而KPS -RH引发DM -AM共聚时 ,DM和AM的竞聚率分别为 0 .0 76和 7.1。     

B113-2型低汽气比CO高温变换催化剂的研制

介绍了B113-2型低汽气比CO高温变换催化剂的研制方法及其特点。实验室测试表明,B113-2型催化剂具有堆密度低、运行强度高、选择性好、抗沸水性能优、本体含硫低及低温活性好等优点。     

水基含铝耐高温防腐蚀涂料

以水溶性的磷酸盐为主要成膜物质,铬酸(盐、酐等)为调节剂,球形铝粉为颜料合成了水基含铝耐高温防腐蚀涂料,该涂料具有优异的耐热、耐湿、耐盐雾、耐高低温冲击等性能。