退火炉保护气氛的安全控制

钟罩室退火护采用微压氢气作为保护气体，炉内压力的监控是保证安全生产不可忽视的必要手段，该文针对该公司选用的国产钟罩式退火护作了简要介绍，对国产钟罩式退火炉压力监控系统作了分析，指出了存在的缺陷，提出了改进措施。     

Heavy arsenic doping of silicon grown by atmospheric pressure selective epitaxial chemical vapor deposition

Selective epitaxial Si with a high arsenic concentration of 2.2×10¹⁹ atoms/cm³ was deposited at a high growth rate of 3.3 nm/min under atmospheric pressure. It was confirmed that this method had excellent selectivity and produced films having good crystalline quality, abrupt dopant profiles at the interfaces, and smooth surfaces. The growth mechanism is discussed in terms of the relationship between the effects of arsenic surface segregation and etching by hydrogen chloride.     

WDB620高强钢应用于大型蜗壳的焊接制造工艺研究

2005年初,水电十四局承担了漫湾二期水电站和小湾水电站蜗壳的制造任务。蜗壳钢材选用国产600 MPa级别高强钢,为了全面综合地考核该级别钢种的材料强度和安全裕度,检验模拟大型蜗壳焊接制造工艺的可靠性。对国产的WDB620高强钢进行了可焊性和制造工艺性试验研究,并在国内首次设计、制造模拟压力容器并对其进行水压试验和爆破试验。研究成果通过中国水电集团公司鉴定,结论为该课题研究成果达到国内选进水平。     

排气管偏置对PV型旋风分离器性能影响的研究

以Ф300mm、标准PV型旋风分离器为基准模型进行冷态对比实验，研究了排气管与筒体轴线偏心布置对PV型旋风分离器分离性能的影响。结果表明，排气管偏置是进一步提高PV型旋风分离器性能的有效措施之一。在适当的偏心矩和偏置方位下，不仅能降低压降，还可以显著提高分离效率。     

Effects of Economic Pressure on Marital Conflict in Romania.

This study examined the interrelationships among economic pressure, maternal depression, social support, and marital conflict in a sample of 239 mothers in Romania. Data were collected through a school-based survey. Findings indicated that higher levels of economic pressure were associated with higher levels of marital conflict. Economic pressure was also associated with higher marital conflict indirectly through increased maternal depression and lowered social support. The present results were similar to those obtained in studies conducted among U.S. samples. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Lifetime and ageing management of nuclear power plants: A brief overview of some light water reactor component ageing degradation problems and ways of mitigation

The susceptibility and tendency for nuclear power plant (NPP) components to undergo changes in their mechanical and physical properties in the course of the NPP lifetime is generally termed as “ageing”. The light water reactor (LWR) nuclear environment is not a begnign one; it is characterized not only by fast neutrons, which can degrade metallic structures, but also relatively high temperatures of coolant water (around 300°C) which may contain impurities (e.g. sulphate, chloride, peroxides) which can cause corrosion. The hydrodynamical conditions of the coolant in steam generators, for example, can cause thermal fatigue, erosion and corrosion; suspended particulate matter can accelerate erosion processes which can lead to wall thinning and lowering of safety margins. Ageing is, therefore, a very complex mixture of factors concerned with materials, temperatures, times of exposure to environments which vary with time and with respect to chemical composition and flow charactertistics.

The paper describes a few ageing phenomena which can be considered important due to their impact on nuclear safety issues; their influence on economic aspects (availability) of NPP is outlined. Mitigation measures for NPP component ageing problems are given together with recommendations for addressing such issues in NPP now and in the future.     

高温超高压处理HDPE的WAXD及FT－IR研究

用ＷＡＸＤ和ＦＴ－ＩＲ对高温超高压处理前后的ＨＤＰＥ进行了研究。发现经５．０ＧＰａ的高压处理或２００℃下４．０ＧＰａ的高压同时处理后的ＨＤＰＥ分子链的化学结构未发生变化。ＨＤＰＥ晶体中（２００）面与（１１０）面衍射峰的峰高比（γ）随着压力的升高而增大，表明ＨＤＰＥ分子链在超高压作用下发生了取向排列，且升高温度更有利于这种取向排列，但当压力增大至５．０ＧＰａ及温度升高至２００℃时，γ反而大幅度下降。     

Density of 1,1-dichloro-1-fluoroethane (HCFC 141b) as a function of temperature and pressure

The density of HCFC 141b has been measured at several temperatures between 260 and 320 K, Mid pressures up to 20 MPa, with a mechanical oscillator densimeter. The densimeter was calibrated with 2,2,4-trimethylpentane, whose density was obtained from a correlating cyuation with 0.3% uncertainty. The density data obtained for HCFC 14H) hits a reproducibility of 0.05% and an uncertainty of 0.3%. The data obtained were fitted to a Tait-type equation. which reproduced the experimental densities within 0.11 % and were compared with the data obtained in other works.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

平均声压级近似计算误差分析

本文用凸集理论分析了平均声压级近似计算的误差,导出了最大误差计算公式,指出了测量数据在何种状态下误差达到最大值。     

氢对2.25Cr-1Mo压力容器用钢力学性能影响

基于试样高温高压釜充氢方法 ,研究了氢对 2 2 5Cr 1Mo压力容器用钢力学性能的影响。对充氢前后的试样进行了拉伸和CVN冲击试验 ,结果表明 ,氢对 2 2 5Cr 1Mo钢的拉伸力学性能和冲击韧性影响不显著。