我公司进行热电联产的可行性分析

大压差减温减压是能的严重贬值。根据公司供热现状，分析了热电联产的可行性，利用蒸汽余压发电后，再供生产系统各热用户，这样既节约了能源又缓解了集团公司用电紧张的局面，而且有相当可观的经济效益。     

Synthesis, isolation, spectroscopic and electrochemical characterization of some calcium-containing metallofullerenes

A few Ca-containing mono-metallofullerenes, i.e. Ca@C₇₆, Ca@C₈₈, Ca@C₉₀ (I, II), were synthesized by an improved DC arc discharge method and isolated by a multi-stage HPLC method for the first time. These isomer-separated metallofullerenes were characterized by LD-TOF MS and UV-vis-NIR spectrometry. Their HOMO-LUMO band gaps and possible molecular geometries are discussed according to the absorption spectra in this report. In addition, the cyclic and differential pulse voltammetry of Ca@C₇₆ was conducted in MeCN/C₆H₅CH₃ (1:4 v/v). The voltammograms of Ca@C₈₂ (II, III) and Ca@C₈₄ (II) were also recorded. Their electrochemical behaviors are discussed compared with those of corresponding ytterbium metallofullerenes. The features of the Ca metallofullerenes’ electronic structures are also discussed.     

悬浮液进样-火焰原子吸收光谱法测定茶叶中的微量铬

将茶叶悬浮于琼脂胶体中制成悬浮液 ,直接喷入空气 -乙炔火焰 ,用火焰原子吸收光谱法测定茶叶中的微量铬 ,方法简便、快速、灵敏度和精密度高、测定结果与用灰化法处理样品一致 ,检验表明 ,两种样品前处理方法之间无显著性差异。相对标准偏差为 3.4 %～ 6 .1% ,加标回收率为 95 .7%～ 10 3.8 %。     

基于红外原理的微型多气体检测系统的设计

为了解决目前煤矿瓦斯事故以及大量使用天然气的家庭安全、环境污染等问题,设计并开发了一种具有集成化、微型化的红外多气体检测系统,通过实验数据的测试对比和数据分析,这种系统达到了微功耗、微体积、宽量程、高分辨率等技术要求,且能集成多气体检测的微型检测系统.重点介绍了红外检测的光学原理,以及从单气体检测引入到集成多气体检测的设计思想和方法,并介绍了有关CAN总线的数据传输方式和无线数据通信方式在系统中的应用.     

Simulation and optimization of SOFC-BCHP system

As the prime motor of dispersed energy system, the high-temperature solid oxide fuel cells (SOFC) are high efficient with large heat recovery. This study presents a simulation of SOFC building-based cooling, heat and power (BCHP) system, which can meet basic requirements in power and heating (cooling) of the designated customers. The peak power load can be met by power grid, while the peak heating (cooling) load requirement can be met by backup equipments. In order to solve the economic dispatch problem of the energy system, a restricted nonlinear optimization model has been developed. The production costs can be minimized via both the equality constraints of customer’s heat and power demands, and other inequality constrains of equipments’ capacities. The sequential quadratic programming method has been used to search the solution. The study indicates that the model can be used to optimize the system’s capacities and run strategy. An office building case has been computed, and it is indicated that the model can be served in design and optimization of SOFC-BCHP system.     

膨胀石墨的饱和吸附量与微观结构的关系

采用不同的方法测定膨胀石墨对不同油质的饱和吸附量,来探讨膨胀石墨的结构与饱和吸附量的关系.由扫描电镜可知,膨胀石墨具有较大的比表面积,其孔结构是以中、大孔为主;蠕虫石墨的表面结构与其内部结构不同,其内部为典型的片层结构.通过观察石墨内部孔结构特征变化,可以分析膨胀石墨对油的去除效率以及影响因素.     

铝合金中锌、铁的快速测定--原子吸收分光光度法

样品以盐酸溶解，加入过氧化氢助溶，蒸至近干．加入1 1盐酸提取，移入100mL容量瓶中，分取部分溶液于50mL容量瓶中，调整盐酸酸度为5％，用水稀至刻度，摇匀后，以空气-乙炔火焰水相直接测定锌和铁。为了消除大量基体元素的影响，在标准系列中加入相当量的铝。此方法快捷、简便，亦可用于锰、镁、铜、铅、镍的测定。     

红外吸收法测硅铁中的超低硫

应用高频红外碳硫仪,建立了硅铁合金中超低硫测定方法,对选择适当的测定条件如助熔剂、分析时间等进行了探讨,最佳测定条件:最大工作电流为400～480 mA;载气纯度为99.99%;陶瓷坩埚需经1 100℃灼烧2 h后,可使空白降至最小;硫元素最短分析时间为40 s,比较水平为5.00.     

高吸油性树脂

高吸油性树脂是与一般吸油材料不同的自溶胀型新型吸油材料,它能够吸收从矿物油到天然油脂等各种油。目前国外正在用途、市场两方面进行系统开发。本文仅就其机理、特征、用途作简单介绍。