High temperature swelling of coal/tetralin mixtures in a high pressure microdilatometer

High pressure microdilatometer experiments were performed on a subbituminous (Wyodak) and a bituminous (Illinois no. 6) coal in helium and hydrogen atmospheres with and without added tetralin. Wyodak coal samples showed no swelling but contractions ranging between 24 and 40 vol% upon heating at 20 and 100 °C min^{− 1} under helium or hydrogen pressures between 150 and 1000 psig (˜1.0–6.9 MPa). Under the same conditions, Illinois no. 6 coals displayed contractions (25–60 vol%) prior to swelling up to 117 vol%. Upon tetralin addition (at 35–190 wt% of the coal), Wyodak coal samples did not swell but showed an increasing contraction with increasing helium or hydrogen pressure due to a slight softening and fusion of the coal particles. In contrast, addition of tetralin at much lower concentrations (5–35 wt%) had a marked effect on the contraction and swelling behaviour of Illinois no. 6. A maximum swelling of 200 vol% was obtained at a tetralin addition of 30 wt%. The increased swelling results from more extensive softening and fusion of coal particles in the presence of tetralin. Both coals showed a decreasing char yield with increasing tetralin concentration. The substantially lower extent of interaction observed between Wyodak coal samples and tetralin compared to Illinois no. 6 coal can be attributed to the differences in pore structure and/or chemical constitution of the two coal samples. Examination of the resultant solids by optical microscopy revealed the microstructural changes produced by thermal treatment in dilatometer experiments.     

Light-sensitive elastomers modified by 4-(N-dimethylmaleimido)-benzenesulphenyl chloride

New light-sensitive polymers were prepared by modification of four different elastomers with 4-(N-dimethylmaleimido)-benzenesulphenyl chloride (DMI-BSCI). Polydienes modified by DMI-BSCI form block copolymers. These polymers show a strong increase of the glass transition temperature T_g whereby the T_g increase of modified poly(octenamer) is much smaller. Higher modified polydienes have two T_g. Modified poly(octenamers) show a melting temperature dependence T_m on the content of trans double bonds which is characteristic of statistical copolymers. The ratio of rate constants with which trans- and cis-structures in poly(octenamer) are occupied by DMI-BSCI, is

$\text{k}{}_{\mathrm{trans}}\text{k}{}_{\mathrm{cis}}\text{= 0.34}$

     

Optical properties of high-temperature heat-treated vitrinites

Three vitrinites (C = 80.0, 87.9 wt%, daf and 94.2 wt%, dmmf) have been heat-treated over the temperature range 1000–2400 °C in the presence of argon. The variation of morphological and optical properties of the heat-treated samples is studied systematically using reflected-light microscopy. An optically isotropic, highly reflecting material is formed on the surface of anisotropic particles of two of the vitrinites (C, 80 and 94.2 wt%) during semi-graphitization (1000–1400 °C), which decreases in extent with increasing temperature and is absent at the end of this stage. The development and subsequent disappearance of the isotropic material is probably due to the evolution of volatile matter and subsequent deposition of pyrolytic carbon during semi-graphitization. The continuous increase of bireflectance of these two vitrinite residues, with heat-treatment temperature, indicates progressive improvement in the ordering of the molecular structure. The reflectance of the heat-treated anthracitic vitrinite (C, 94.2 wt%), increases continuously whereas the reflectance of the heat-treated low-rank vitrinite (C, 80 wt% decreases slightly from a maximum during semi-graphitization. The third vitrinite (C, 87.9 wt%) does not develop an optically isotropic highly reflecting material on particle surfaces during semi-graphitization. However, this vitrinite softens during carbonization (25–1000 °C) producing a residue with a mosaictype anisotropic microstructure. The condition of polished surfaces prepared from residues of this vitrinite from the semi-graphitization to crystallization stages (1000–2300 °C) deteriorates, values of bireflectance and reflectance decrease continuously with increasing temperature. This appears to result from a reduction in the surface hardness of particles of this vitrinite residue resulting on transformation from two-dimensional ordering to three-dimensional graphitic ordering.     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

改善钢桥面铺装层高温作用的有效措施

为了降低钢桥面铺装层内较高的温度,提高铺装材料使用性能,推迟桥面的早期破坏.采用有限元手段,以傅里叶传热定律为理论基础,根据气象部门提供的气象资料,对开放式钢箱梁及封闭式钢箱梁铺装层的温度场进行研究.结果表明:开放式箱梁可以降低桥面铺装层温度,降低高温持续作用时间,改变桥面铺装层高温的作用位置.     

大口径光学透镜瞬态温度场模拟

为考察热辐射效应对光学元件稳、瞬态温度场的影响,给出了考虑辐射和导热耦合换热情况下复杂几何结构光学透镜稳、瞬态热特性的适体坐标下离散坐标法.对喷管形和圆柱形介质进行计算并与其他方法比较表明,建立的适体坐标系下辐射与导热耦合换热计算方法精度较好.对两端为球缺中间为圆柱的大口径透镜内的辐射与导热耦合换热过程进行了数值模拟.计算结果表明,为了精确地预测半透明介质如透镜内的温度分布,应该考虑辐射与导热耦合作用,且应当考虑介质的光谱特性.     

Effects of main factors on remedying northern landscaping water by hybrid ecological filter

Natural zeolite and coal cinder were layered as main packing medium of the ecological filter instead of traditional filling to remedy the static lake water in Northern China.The ecological filter was running in a combined upward and downward flow mode.Dynamic experiments were carried out to study the effects of retention time and ambient temperature on pollutants’ removal efficiency of the hybrid ecological filter.The function of plant was also studied by contrast test.It is showed that the removal efficiencies of NH4+-N and TP are increased when the retention time is changed from 1 h to 2 h and 4 h,but the removal efficiency of TN is decreased,the removal efficiency of NH4+-N is increased from 91.5% to 98% and that of TP is increased from 31.8% to 52.5%.When the temperature declines,the temporal removal efficiency of NH4+-N is reduced,but the removal efficiency of 24 h and 48 h is remained.The removal efficiency of TP after 24 h and 48 h is decreased when the temperature declines evidently.The retention time plays an important role in NH4+-N and TP removal,and the ambient temperature is significant for TP removal.The plant favors for TP and organic matter removal but has little effect on TN removal.     

自源无线温度检测技术的研究与应用

基于温差模块、DS18B20和红外技术的自源无线温度检测技术,利用故障发热部位与环境的温度差发电自给,解决高压现场内难以获得低压电源的问题;利用红外线传输信号,避免在高压变电站中布线和信号受高压现场的强电磁干扰.实验结果表明,半导体温差模块输出电压与温差在一定范围内呈线性关系,温差越大,输出电压越大.采用带有超低压启动器的DC/DC电压提升电路进行电压提升,解决实际应用中由于温差过小而导致的半导体温差模块输出电压过低,不足以提供所需的电压问题.     

Progress and recent trend in MILD combustion

Moderate or intense low oxygen dilution(MILD)combustion plays a significant role in the mitigation of combustion-generated pollutants and greenhouse gases whilst meeting thermal efficiency needs.However,due to the lack of the fundamental knowledge on this combustion,there is a misconception that MILD combustion should be established by high preheating of the air,which has limited its application.Our research and development on this combustion has been performed for several years. We have found that the requ...     

应力吸收层沥青混合料的低温抗裂性能

通过对自主研发的Sampave等3种改性沥青结合料和不同级配的应力吸收层沥青混合料进行低温弯曲和低温蠕变试验,分析沥青结合料和矿料级配对应力吸收层沥青混合料低温抗裂性能的影响.结果表明:自主研发的Sampave特种改性沥青混合料具有优良的低温抗裂性能,但单一改性剂SBR改性沥青并不能达到应力吸收层沥青结合料的性能要求;矿料4.75 mm、0.075 mm筛孔通过率对其低温抗裂性能影响较敏感.