铝合金铸件充型过程及氧化膜卷入的数值模拟

对于直接有限差分法，提出了单元表面无量纲距离、表面充填比率和体积充填比率，以描述铸件充型过程中自由表面的形状，建立了相应的充型过程数学模型，考虑了自由表面形状对动量、质量和能量传输的影响；提出了充型过程自由表面碰撞中表面氧化膜破碎，及其后破碎氧化膜流动的计算模型。对实验铝合金铸件进行了模拟应用，通过实际铸件充型过程的特殊X射线实时观察和记录。及实际铸件的气孔、收缩缺陷分布的检测，对模拟结果进行了验证分析。结果表明：充型过程模拟结果与X射线实时观察结果吻合较好，尤其是自由表面的变化；氧化膜卷入模拟结果与实际铸件气孔、收缩缺陷的分布存在一定的对应关系。     

Research on the Formation of Metal-Ceramic Surface Composite Coating by Wide-Band Laser Cladding

LASER SURFACE MODIFICATION is an importanttechnology in the fields of heat treatment and surfaceengineering of materials at present[1-3].Lasercladding is a significant technology in laser surfacemodification[4-7].In-situ synthesized metal-ceramiccomposite coatings fabricated by laser claddingcombine the high ductility of the bonding metal matrixwith the high strength of the ceramic particles perfectlyin the cladding layer,the rapid solidification structure isfiner than that of the cla…     

坝基岩体开挖卸荷松弛特征分析及加固措施——以锦屏一级拱坝为例

结合高地应力环境下锦屏一级坝基岩体开挖卸荷松弛特征,分析了坝基岩体开挖不同锚固措施的加固效果,并根据工程现场坝基岩体开挖锚固措施的试验成果,对高地应力环境下坝基岩体不同开挖加固方案进行了对比分析,提出了锦屏一级坝基岩体的开挖实施方案,有效地降低了开挖卸荷松弛对坝基岩体质量的二次损伤。建议在河床高地应力部位实行先锚后挖的施工程序,保护层开挖滞后时间为2~3个月。     

热塑性复合材料自动纤维铺放装备技术

基于热塑性复合材料(TPC)自动纤维铺放(AFP)原位固结技术,开展热塑性复合材料AFP装备技术研究,分析AFP平台的功能需求,提出平台总体规划方案,设计开发热塑性复合材料自动铺丝头,并提出预浸纱张力控制方案、精确送纱及温度闭环控制方案。在此基础上,设计AFP系统可行性验证实验,证明方案的可行性和平台的实用价值。结果表明:本实验平台针对热塑性复合材料铺放特点,优化张力与铺放速度匹配,实现预浸纱动态恒张力铺放,确保成型构件质量;实验平台调控铺放速度与送纱协调,实现精确定位,保障成型构件尺寸;建立了铺放速度与加热功率、热流分布关系,实现高精度温度场分布控制。虽AFP成型构件的力学性能比热模压成型构件的力学性能低约20%,但为热塑性复合材料AFP装备技术的广泛应用奠定了基础。     

PAM/GO复合材料制备及驱油性能研究

利用改进的Hummers法制备氧化石墨烯(Graphene oxide,GO),并利用原位聚合法引入丙烯酰胺(AM),制备PAM/GO复合材料。采用X射线衍射(XRD)、傅里叶红外光谱(FTIR)、激光粒度分析和驱油实验等分析方法对PAM/GO复合材料的官能团和驱油性能进行了研究。X射线衍射(XRD)、傅里叶红外光谱(FTIR)实验结果表明,PAM/GO的谱图中,在2θ=9.4°的氧化石墨的特征峰消失,在2θ=23°出现一个宽的衍射峰,说明PAM/GO为无定形结构,也说明氧化石墨与PAM兼容性良好,没有发生明显的团聚。傅里叶变换红外光谱分析表明,PAM/GO红外谱图中具有很明显的丙烯酰胺特征峰,说明丙烯酰胺成功引入到氧化石墨烯中。激光粒度分析结果表明,石墨烯复合材料的平均粒径范围在0.19~1.45μm。界面张力分析表明,0.3%浓度的石墨烯材料降低油水界面张力的能力较好,与注入水相比,能将油水界面张力从101降低到100数量级左右。PAM/GO复合材料应用于低渗透岩心的动态驱替实验表明,0.3%浓度的石墨烯复合材料对低渗透油藏提高采收率在10%左右,且驱替压力变化平稳,不会对地层造成堵塞伤害。     

Er对原位ZrB2/A356.2复合材料组织与性能的影响

采用原位合成法制备ZrB_2/A356.2复合材料,研究了引入ZrB_2对A356.2铸态微观组织的影响以及不同Er含量对复合材料铸态微观组织及力学性能的影响。结果表明,引入ZrB_2后α-Al晶粒和粗大共晶Si发生略微细化,添加Er后α-Al晶粒细化明显,并且Er对共晶Si有很好的变质效果,α-Al由粗大树枝晶变为蔷薇状、球状,共晶Si从粗大的针片状变为细小的短棒状、球状,有效提高了复合材料的力学性能。当Er添加量为0.10%(质量分数)时,其细化变质效果最为明显,复合材料力学性能提高最为显著。     

纳米银/聚合物复合材料的原位法制备技术综述

纳米银/聚合物复合材料结合了纳米银优异的物理化学性能和聚合物的易加工和成膜性的特点,被广泛应用于抗菌、催化和光电等领域。原位法具有工艺简单、成本低、可形成单分散的纳米粒子等优点,被广泛用于制备纳米银/聚合物复合材料。主要综述了纳米银/聚合物复合材料的原位制备方法,主要包括原位生成法、原位聚合法、双原位合成法,并提出了纳米银/聚合物复合材料的发展方向。     

冷凝式天然气快速热水器的应用探讨

根据对冷凝式燃气快速热水器节能效果的理论分析,产通过试验得出冷凝式天然气快速热水器热效率与其排烟温度的关系,试验结果表明冷凝式天然气快速热水器有很好的实用价值。     

Improving the spatio-temporal distribution of surface solar radiation data by merging ground and satellite measurements

Appropriate information on solar resources is very important for a variety of technological areas, such as: agriculture, meteorology, forestry engineering, water resources and in particular in the designing and sizing of solar energy systems. However, the availability of observed solar radiation measurements has proven to be spatially and temporally inadequate for many applications. In this paper we propose to merge the global solar radiation measurements from the Royal Meteorological Institute of Belgium solar measurements network with the operationally derived surface incoming global short-wave radiation products from Meteosat Second Generation satellites imageries to improve the spatio-temporal resolution of the surface global solar radiation data over Belgium. We evaluate several merging methods with various degrees of complexity (from mean field bias correction to geostatistical merging techniques) together with interpolated ground measurements and satellite-derived values only. The performance of the different methods is assessed by leave-one-out cross-validation.     

A distributed Bragg reflector porous silicon layer for optical interferometric sensing of organic vapor

In this study, we successfully demonstrated the rapid, sensitive, and reversible sensing of organic vapor using a distributed Bragg reflector (DBR) porous silicon (PS) layer. We fabricated the DBR PS layer on a p⁺-type silicon substrate and investigated its reflectance spectra before, during, and after exposure to the different concentrations of various organic vapors. When the DBR PS layer sample was exposed to methanol, acetone, ethanol, and isopropanol vapors, the maximum reflectance peak promptly shifted toward longer wavelengths by about 4.5, 23.2, 26.0, and 38.2 nm, respectively. We determined that the red-shift in the reflectance spectrum could be attributed to the changes in the refractive index induced by the capillary condensation of the organic vapor within the pores of the DBR PS layer. The DBR PS layer showed excellent sensing ability under the different concentrations and types of organic vapors. In addition, a slight hysteresis of the red-shift was observed during repeated exposure to organic vapors at different concentrations. After removing the organic vapors, the reflectance spectrum promptly returned to its original state.