Φ10007/00有压三产品重介旋流器结构参数优选与分选效果

辛置选煤厂针对原煤煤质变化后的特点 ,采用有压给料三产品重介旋流器为核心的高效选煤工艺系统分选 5 0～ 0mm原煤 ;对旋流器一段及二段中心管的直径和插入深度、二段底流口的直径等进行了优化调整 ,同时调整了介质泵的工作频率及悬浮液密度等参数 ,取得了分选效率高、产品质量稳定等显著效果     

气体控制参数对气体辅助成型产品翘曲的影响

从气体辅助注射成型工艺的角度探讨了气体的延迟时间和第一段压力这两个关键的参数对槽的影响进而对产品翘曲变形的影响，结果表明：虽然通过使用气体辅助注射成型技术能改善产品变形，但并不能完全消除变形；造成产品变形的原因和机理十分复杂，只有进行从设计到工艺的全方位考察才能有效的控制变形，气体手指效应也是造成产品变形的一个重要因素，工艺上可以通过调整延迟时间和气体压力来减小产品的变形量。     

ZAG100－1000／35型全自动压滤机的研制与应用

介绍了ＺＡＧ１００－１０００／３５型全自动压滤机的研制与应用情况．表明机组主机结构、生产能力、自控水平均比引进产品有所提高，整机性能良好。     

神华集团孙家沟选煤厂工艺流程及设备的评价

简述了孙家沟选煤厂工艺参数的选择和设计情况及投产后的运行效果,评价认为,该厂建设速度快,工艺流程合理,设备性能良好,产品质量合格、稳定。     

动筛跳汰系统设计中若干环节的探讨

论述了动筛跳汰机的选型原则及技术要求,提出了4m2动筛跳汰机分选系统设计中各环节技术参数及所用设备的选择条件,同时对动筛跳汰系统各环节的布置进行了探讨。     

巴洛沙星的合成研究

巴洛沙星是一种新型喹诺酮类抗感染药物。从反应温度、反应时间、反应物料摩尔配比和反应溶剂等对合成的影响进行了详细研究。结果表明,其优惠工艺合成条件为:以S1为溶剂,反应温度40℃,反应时间4 h,反应物料摩尔配比n螯合物Ⅰ∶nMAP=1∶1,产品收率79.5%,含量91.4%。     

An automatic parameter calibration method for the SWAT model in runoff simulation

Runoff simulation is highly significant for hydrological monitoring, flood peak simulation, water resource management, and basin protection. Runoff simulation by distributed hydrological models, such as the soil and water assessment tool (SWAT) model which is the most widely used, is becoming a hotspot for hydrological forecasting research. However, parameter calibration is inefficient and inaccurate for the SWAT model. An automatic parameter calibration (APC) method of the SWAT model was developed by hybrid of the genetic algorithm (GA) and particle swarm optimization (PSO). Multi‐station and multi‐period runoff simulation and accuracy analysis were conducted in the basin of the Zhangjiang River on the basis of this hybrid algorithm. For example, in the Yaoxiaba Station, the calibration results produced an R² of 0.87 and Nash Sutcliffe efficiency (NSE) index of 0.85, while verification results revealed an R² of 0.83 and NSE of 0.83. Results of this study show that the proposed method can effectively improve the efficiency and simulation accuracy of the model parameters. It can be concluded that the feasibility and applicability of GA‐PSO as an APC method for the SWAT model were confirmed via case studies. The proposed method can provide theoretical guidance for many hydrological research fields, such as hydrological simulation, flood prevention, and forecasting.     

Connecting parameters optimization on unsymmetrical twin-tower structure linked by sky-bridge

Based on a simplified 3-DOF model of twin-tower structure linked by a sky-bridge, the frequency response functions, the displacement power spectral density （PSD） functions, and the time-averaged total vibration energy were derived, by assuming the white noise as the earthquake excitation. The effects of connecting parameters, such as linking stiffness ratio and linking damping ratio, on the structural vibration responses were then studied, and the optimal connecting parameters were obtained to minimize the vibration energy of either the independent monomer tower or the integral structure. The influences of sky-bridge elevation position on the optimal connecting parameters were also discussed. Finally, the distribution characteristics of the top displacement PSD and the structural responses, excited by El Centro, Taft and artificial waves, were compared in both frequency and time domain. It is found that the connecting parameters at either end of connection interactively affect the responses of the towers. The optimal connecting parameters can greatly improve the damping connections on their seismic reduction effectiveness, but are unable to reduce the seismic responses of the towers to the best extent simultaneously. It is also indicated that the optimal connecting parameters derived from the simplified 3-DOF model are applicable for two multi-story structures linked by a sky-bridge with dampers. The seismic reduction effectiveness obtained varies from 0.3 to 1.0 with different sky-bridge mass ratio. The displacement responses of the example structures are reduced by approximately 22% with sky-bridge connections.     

应力时效对P110套管螺纹参数的影响

在Φ339.7mmP110高强套管研制开发中发现,螺纹加工完成后因应力时效引起管体端头直径的变化,导致螺纹参数随之变化。通过对调质处理并矫直的套管几何尺寸及螺纹参数的测量试验,测试出随时间推移钢管几何尺寸、螺纹参数的变化量,分析其变化趋势及程度。通过应力时效对钢管形体作用的机理分析,提出确保套管螺纹参数稳定的控制措施。     

周期式冷轧管机的发展

叙述了周期式冷轧管机国内外开发、研制的历史和现状。介绍了典型型号的周期式冷轧管机的技术参数,结构特点及目前应用情况。