基于红外感应开关控制的建筑照明节能改造

介绍建筑公共照明控制现状和红外感应开关控制原理,并对照明控制节能改造进行经济分析.     

Infrared heat treatment of Ti-6Al-4V with electroplated Cu

The objective of this study is to investigate an innovative infrared (IR) technique to enhance adhesion of electroplated copper (Cu) on Ti-6Al-4V without dichromate dipping. The ultimate goal is to develop a Cu coating process on Ti-6Al-4V without hazardous hexavalent chromium (Cr) solution treatments. Cu coatings of around 50 μm were electroplated on Ti-6Al-4V specimens at a current density of 0.03 A/cm² in an acidic Cu solution. To improve adhesion of coatings, IR heat treatments were performed on the Cu-coated samples at different temperatures and durations: 860 °C for 600 s and 875 °C for 20–120 s. This process was accomplished in an attempt to replace the use of dichromate dipping before electroplating. For samples heat treated at 860 °C, no bonding existed, even after 600 s. It is believed that solid-state diffusion prevailed at 860 °C and that 600 s was not enough for sufficient diffusion to occur. Adhesion was poor when samples were heat treated at 875 °C for 20 s. Excellent adhesion was observed when the heat treatment holding time was increased to 40 s. For 90 s, the surface appearance of coatings partially changed from Cu-colored to a grayish color. There was no Cu left on the surface after a 120 s heat treatment. From optical microscopic observations on sample cross sections, an interlayer between the Cu and Ti-6Al-4V formed when heat treated at 875 °C for 40 s and longer. The interlayer thickness increased as the holding time increased, until depletion of Cu. The sheet resistivity of coated specimens was on the order of pure Cu for samples heat treated at 875 °C and less than 90 s. During the 875 °C heat treatment, the following occurred: solid-state diffusion of Cu in Ti-6Al-4V, formation of eutectic solutions, dissolution of Cu and Ti-6Al-4V into the liquid phase, and the formation of intermetallic compounds. The lowest eutectic temperature of 875 °C played a key role in this innovative process of Cu coating on Ti-6Al-4V. This paper was presented at the 2nd International Surface Engineering Congress sponsored by ASM International, on September 15–17, 2003, in Indianapolis, Indiana and appears on pp. 403–10 of the Proceedings.     

红外球形摄像机补光系统的设计与实现

为解决目前红外球形摄像机普遍存在的红外灯板发热严重、近距离采集图像容易出现中心过曝等问题,搭建了以STM32F103为主控芯片、以PT4115为红外灯调光芯片的硬件电路,设计了一种基于红外灯亮度与镜头倍率匹配算法的新型红外球形摄像机补光系统,实现了在红外灯板上对多个串联红外灯的PWM智能调光。通过实验证明,该设计可以有效节约功耗、降低发热,提高了红外灯板的稳定性,从而提高红外球形摄像机的夜视监控效果。     

红外瓦斯传感器检测中噪声点研究

针对红外瓦斯传感器检测瓦斯浓度时易受到温度、压力等物理环境的影响而存在检测浓度值不准确的问题,提出一种结合分化距离与K-means算法方法找出瓦斯浓度数据集中的噪声点.该方法混合了分化距离和K-means算法的优点.对实验设计的传感器采集的瓦斯浓度数据集进行距离分化;运用K-means算法与孤立度系数结合法找出采集数据集中的噪声点并直接丢弃噪声点;通过均值法计算瓦斯浓度.实验结果表明:测量误差小于1％,精度高.     

基于LBP的眼睛开闭检测方法

在基于机器视觉的疲劳驾驶预警系统中通过驾驶人员眼睛的状态来判断其是否疲劳是最直接和有效的途径,对眼睛的开与闭这两个基本状态的检测是判断疲劳的一个关键技术.针对红外视频人脸图像序列,提出一种基于LBP纹理检测算子的快速准确人眼开闭检测方法.该方法首先精确提取眼睛区域,然后利用对光照具有鲁棒性的LBP纹理检测算子检测眼睛区域纹理并计算其二阶矩、熵和边际分布二阶矩作为特征向量,最后使用SVM对特征向量进行分类以达到开闭检测的目的.大量实验结果表明,该方法不仅具有较高的检测准度,而且能完全满足实时要求.     

基于改进Rank变换和分段MER的镜片疵病检测算法

为了解决目前光学镜片表面疵病宽度测量主要依赖人工检测而导致弯曲划痕宽度检测精度较低的问题,提出一种基于Rank变换和分段最小外接矩形(MER)的镜片表面划痕宽度测量方法.该方法首先通过改进的Rank变换算法比较像素灰度相对关系来提取疵病目标,然后计算其最小外接矩形,根据矩形长宽比初步判别疵病类型(划痕或麻点),最后将疵病分割为多个小区段,分别计算每段的最小外接矩形并获得其宽度,比较取最大宽度作为疵病宽度值.试验结果表明,该方法具有较高的可行性与精确性,能够有效提取出疵病和计算其特征参数,可以满足工程实际的需要.     

显微红外热成像技术在故障定位中的应用

电子元器件是整机的基础,在装备的生产和使用过程中,元器件工作异常将影响整个装备的正常运行,元器件发生故障时,必须迅速、准确地进行故障分析和失效定位,避免军用装备在关键时刻发生故障。显微红外热成像技术是一种对电子元器件的微小面积进行高精度非接触的测量,能够显示元器件的反常热分布,暴露不合理的设计和工艺缺陷。论文介绍了显微红外热像仪的原理及特点,举例说明了显微红外热成像技术在失效分析故障定位中的应用,对元器件的故障失效分析和有效性检测提供了指导作用。     

Improved phase performance for rotman lens

Rotman lenses are used to obtain multiple beams from a single array. Although the beams produced by the feed antennas at focal points have no path length errors, the beams produced by feed antennas at off focal points may have large path length errors. These path length errors cause deterioration in the multiple beams. In this article, two novel methods are introduced to obtain feed curves which reduce the path length errors of off focal feed points significantly, compared with the commonly used circular and elliptical feed curves. The first method obtains feed curve points based on having zero path length error at three chosen points of the radiating array for each beam direction. The second method uses the particle swarm optimization method for obtaining optimum feed points for each beam direction. The results show that there is a very significant drop in the level of the maximum path length errors (in the order of about 1:4). © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE 23: 634–638, 2013.     

基于遗传优化的BP神经网络法在甲烷检测中的应用

针对传统的最小二乘法拟合红外传感器的输出特性曲线时存在误差大、计算复杂,传统的BP神经网络法拟合红外传感器的输出特性曲线时存在网络收敛速度慢、易陷入局部极小的问题,通过分析改进的最小二乘法和改进的基于遗传优化的BP神经网络法的拟合效果,指出改进的BP神经网络法拟合度较高,并给出了改进的BP神经网络法在甲烷体积分数检测中的实验结果。结果表明,该方法能够拟合出理想的曲线,有效提高了红外传感器的检测精度及响应速度。     

MEMS热电堆高温测试系统中单晶材料的红外衰减特性研究

在对PerkinElmer公司的MEMS热电堆红外探测器静态和动态特性实验研究的基础上,本文提出了由MEMS热电堆、红外衰减片、靶体和存储模块组成瞬态表面高温测试装置的方案,对拓宽测温上限的关键元件--红外陶瓷衰减片进行了较深八的研究,用MEMS热电堆测量方法测量了氧化锆陶瓷片红外吸收系数,得出了不同厚度氧化锆（熔点为2715℃）陶瓷片红外衰减倍数曲线,为基于MEMS热电堆的表面高温测试装置的设计提供了依据。