洗车废水回用技术的研究应用进展

洗车废水含有油污，泥沙，表面活性剂及其他可溶性有机物。洗车废水处理回用技术因洗车规模大小不同存在很大差别。该文介绍了目前国内外大型洗车场废水处理回用的主要工艺，概括和比较了洗车点洗车废水回用装置的主要技术，分析了目前小型回用装置存在的问题，并对发展方向作了展望。     

光催化-Fenton工艺处理废纸制浆废水

为有效处理废纸制浆废水,采用氙灯照射下的光催化-Fenton技术,研究不同反应器、曝气、草酸钾、H2O2投加方式和废水质量浓度对光-Fenton工艺去除废水中TOC或吸光度的影响.结果表明,提高光照强度可提高TOC去除率;添加适量的草酸钾可提高处理效果;H2O2分两次投加可取得较好的处理效果,大大减少对催化剂的需求;在处理过程中使废水暴露于空气可提高有机物的脱氯效果,但曝气对处理效果并无益处.对于TOC为185 mg/L左右的废纸制浆废水,在[H2O2]=1000 mg/L、[Fe(Ⅱ)]=100 mg/L、pH=3.0、温度为30℃的条件下,经过30 min处理,废水的TOC可去除63%以上.     

Investigation on the electrocatalytic characteristics of SnO_2 electrodes with nanocoating prepared by electrodeposition method

SnO2 electrodes have many advantages in the degradation of toxic or bio-refractory organic wastewater,and SnO2 is a kind of anode material which has the potential to be widely used.Electrocatalytic effi-ciency and service life of Ti\SnO2 electrodes are key factors that can influence its applications.In order to enhance the electrocatalytic characteristics of Ti\SnO2 electrodes,a type of electrocatalytic electrode with nanocoating was prepared by direct current(DC)electrodeposition method and thermal oxidati...     

无机分离膜

本文综述了无机膜的结构及特性,无机膜的分离机理、无机膜的制备方法。介绍了常见的几种无机膜及其在气体、液体以及生化产品的分离、废水处理、啤酒、饮料的滤菌、海水淡化等领域中的应用。展望了无机膜在硫化氢分解制氢、丙烷、环己烷和乙苯脱氢等反应中实现反应分离一体化的前景。     

The use of wood pulp and radiation‐modified starch in wastewater treatment

Radiation‐induced graft copolymerization of maize starch/acrylic acid has been performed. Also, natural byproduct wood pulp was used after chemical treatment for the removal of metal ions from the investigated wastewater. The surface and structure morphology of the wood pulp and starch/acrylic acid were investigated by scanning electron microscopy and infrared spectroscopy. The physical parameters, such as swelling, gel percentage, and grafting efficiency (%) of starch/acrylic acid copolymer, were studied. The factors affecting the abilities of the prepared materials for removing heavy metal ions and dyes from aqueous solutions were studied. It was found that the maximum metal uptake is in the following sequence: Fe³⁺ > Cr³⁺ > Pb²⁺ > Cd²⁺. The adsorption capacity of such investigated metal ions increases with the increase of pH values. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

钯－银合金膜分离氢气的研究

采用厚为５０μｍ的Ｐｄ／Ａｇ（２３）合金膜进行了氢气渗透系数的测定和Ｈ＿２／Ｎ＿２混和气分离的研究，得出温度、压力、膜厚、进料气流量、膜的预处理和再活化及膜表面中毒等因素对氢气渗透的影响。分离Ｈ＿２／Ｎ＿２混和气可获得高纯氢气。     

ET-98无机磷酸盐富锌涂料的性能与应用

论述了国内首创的ET-98无机磷酸盐富锌涂料，该涂料克服了无机磷酸富锌涂料、无机富锌涂料喷砂、抛丸的缺点，简易可行，除锈、除油后即可涂刷，并能达到较好的防腐效果。     

Thermochemistry on coordination behavior of samaric chloride hydrate with diethylammonium diethyldithiocarbamate

The complex of samaric chloride lower hydrate-with diethylammonium diethyldithiocarbamate (D-DDC) was synthesized conveniently in absolute alcohol and dry N2 atmosphere. The title complex was identified as Et2NH2[Sm(S2CNEt2)4] by chemical and elemental analyses, the bonding characteristics of which was characterized by IR.T he enthalpies of solution of samaric chloride hydrate and D-DDC in absolute alcohol at 298.15 K and the enthalpies change of liquid-phase reaction of formation for Et2NH2[Sm(S2CNEt2)4] at different temperatures were determined by microcalorimetry. On the basis of experimental and calculated results, three thermodynamic parameters (the activation enthalpy, the activation entropy, and the activation free energy), the rate constant, and three kinetic parameters (the apparent activation energy, the pre-exponential constant, and the reaction order) of liquid phase reaction of formation were obtained. The enthalpy change of the solid-phase title reaction at 298.15 K was calculated by a thermochemical cycle.     

城市轨道交通车辆段与维修基地的生产污水处理探析

简要分析了我国城市轨道交通车辆段与维修基地生产污水的特点,并对城市轨道交通车辆段与维修基地生产污水处理的有效措施进行了深入的探讨、分析,以供参考。     

势能增氧生态净化工艺在高浓度有机废水处理中的应用

比较污水处理好氧工艺生物转盘法和滴滤池法的优缺点,并结合两种废水处理方法的优点,设计新的工艺——势能增氧生态净化工艺,对南京市腊梅食品厂高浓度有机废水进行处理。结果表明,势能增氧生态净化工艺设计简单,不需鼓风曝气,污水进入废水处理系统后出水即达到所要求的水质标准,且全部自控管理,具有废水处理效果佳、运行费用低的特点。