丁烷脱沥青装置掺炼油浆工艺

由于新疆原油的渣油中重金属含量高，结构组成复杂，直接进入催化裂化装置做原料时，催化剂重金属污染严重，产品分布差，渣油掺炼量低。而且，丁烷脱沥青过程所得到的脱油沥青软化点高、针入度低、延伸度差。为了提供优质的催化裂化原料和优质的道路沥青原料，进行了丁烷脱沥青装置掺炼油浆组合工艺的开发和应用，取得了较好的效果，脱沥青油收率提高，提供了更多重金属含量低的催化裂化原料，沥青性能得到改善。     

先进的现场供气设备--TCN640制氮机

对安装于深圳赛意法微电子有限公司的TCN640制氮机进行了简介。该设备由Air Liquide Japan Ltd．(日本液空公司)总体设计、制造，国内技术人员消化改进工艺，具有设备配置先进，安装简单，安全高效，能耗低等优点，其产品氮气的纯度已超过了高纯氮的技术指标。     

铸件浸渗系统脱液机故障树的建立和分析

利用FTA方法对脱液机的各种故障进行系统分析,建立了脱液机的故障树,并对故障树进行定性分析.找出了影响脱液机可靠性的主要因素,提出了提高脱液机可靠性的相应措施.     

Uncertainty Matters: Computer Models at the Science–Policy Interface

The use of computer models offers a general and flexible framework that can help to deal with some of the complexities and difficulties associated with the development of water management plans as prescribed by the Water Framework Directive. However, despite the advantages modelling presents, the integration of information derived from models into policy is far away from being trivial or the norm. Part of the difficulties of this integration is rooted in the lack of confidence policy makers have on the incorporation of modelling information into policy formulation. In this paper we examine the reasons for this apparent lack of confidence and explore how some tools, presently in use, address this problem. We conclude that public confidence in models is highly dependent on the way uncertainties are addressed and suggest possible directions of action to improve the current situation. Four real case studies illustrate how computer models have been used in The Netherlands for carrying out management plans at regional and national scale. We suggest that the solution to integrate modelling information into policy formulation lies on both the modelling and the policy-making communities.     

蒸发式空冷器的运行实践

通过了解蒸发式空冷器的工作原理和结构,在运行实践过程中,对组成设备出现的问题提出相应的解决方案,并对部分组成设备提出改进的建议,以方便检修和维护,并提出了在冬季长时间高炉休风情况下保证水温不下降过低的解决方案。     

钢结构稳定设计——理论与实践

本文提出了实际工程结构的非线性理论设计和分析方法(NIDA),并以澳门回归纪念馆的设计为例,展示了本方法的优越性.在设计过程中,设计者无需假设K系数和有效长度,在结构分析完成后便可迅速完成设计,因此本文提出的方法既经济又便利.尽管对于钢框架在往复荷载及动力荷载作用下的弹塑性大位移分析已经非常成熟,但本文的方法开创了结构的非线性分析及设计的新纪元,能够对现行的设计方法理论起到巨大的推动作用.     

Means of enhancing and promoting the use of solar energy

The development of renewable technologies in the last decade has been exceptional. In photovoltaic (PV) for example, efforts were not only limited to merely improving their efficiency but also to the reduction of the cost of cells and modules via volume production for commercial markets. There are many national schemes promoting the use of PV technology and regional targets for a share of renewable energy production. This paper attempts to relay to the reader a journey, based on experience, approaches for enhancing the prospect of utilising solar energy within the society we live in. The issue of expansion or enhancing the utilisation of solar energy can be undertaken by individuals, groups, institutions and governments. The aim of this paper is to provide some examples, which could serve as a framework in which action could be taken to promote solar technology.     

变风量空调系统

介绍了变风量空调系统（VAV系统）的特点、末端装置的型式以及最小送风量的确定方法，指出了VAV系统的研究重点和发展前景。     

车载制氧机加装预冷装置的研究与实现

航空兵部队地面保障装备之一的车载移动式制氧机，采用封闭循环水冷却，由于受到使用条件的限制，多数情况下冷却效果不尽理想，加装蒸汽压缩预冷装置，即可较好地了和低冷却系统温度，提高制冷量和整机使用寿命，又可满足整车机动性，动力等技术要求。     

高速遥传系统配接DTB总线仪器的接口设计

FPGA（field programmable gate array）技术已经成为当今实现电子线路集成化的重要方法之一。通过应用PFGA和单片机技术，设计一种接口电路，用于将CSU和SKC数控系统中DTB总线的井下仪器挂接到高速 遥传系统上，从而大大提高高速电缆遥传系统的兼容性，使其应用范围更广，市场前景更好。