醋酸乙烯-丙烯酸无皂乳液共聚的研究

以醋酸乙烯(VAc)为主单体,丙烯酸(AA)为改性功能单体,以半连续加料方式进行无皂乳液共聚过程,得到了稳定且固含量为30%左右的乳液。探讨了功能单体AA含量、反应温度等对共聚的影响。采用FT-IR、粒径分析等方法对共聚物的组成、乳胶粒子的尺寸及分布进行了分析表征。结果表明:在(65±2)℃下聚合,所得乳液稳定性好、转化率高、反应完全,且随着功能单体AA含量的增加,乳液黏度上升、单体转化率下降、乳胶粒粒径变小且粒径呈单分散性。     

Chemospecific ring-opening polymerization of α-methylenemacrolides

α-Methylenemacrolides having various groups, such as aromatic, ether, and amine, were enzymatically, anionically, and radically polymerized. The polymerization with the lipase catalyst successfully afforded polymers only through the ring-opening process, whereas the vinyl polymerizations selectively proceeded by using anionic and radical initiators. The polyesters obtained by the enzymatic polymerization have a polymerizable methacrylic methylene group in the main-chain, in addition to the aromatic and polar groups, and were further radically polymerized to quantitatively produce a cross-linked polymer gel.     

Oxygen plasma modification of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) film surfaces for tissue engineering purposes

Plasma glow‐discharge application is known as a technique to coat or modify the surfaces of various materials. In this study, the influence of oxygen rf‐plasma treatment on surface and bulk properties of a biological polyester, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate), were studied by determining water content and water contact angle, and by using X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The plasma‐treated films absorbed more water than the untreated film, and the absorbance increased with the total power applied. The water contact angles decreased and O/C atomic ratio increased on treatment, indicating that the material became more hydrophilic due to increases in the oxygen‐containing functional groups on the surface of the polymer. A direct relation could be observed when the O/C ratio was plotted against the total power applied (treatment duration × treatment power). SEM revealed a visual record of surface modification, the extent of which increased with increased total power. It was thus possible to alter the surface chemistry and relevant properties of the polymer film using oxygen plasma as a tool. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1285–1289, 2003     

Synthesis of well-defined poly(styrene)-b-poly(p-tert-butoxystyrene) multiblock copolymer from poly(alkoxyamine) macroinitiator

The stepwise insertion reaction of styrene (St) and p-tert-butoxystyrene (BOSt) into poly(alkoxyamine) macroinitiator was carried out to provide well-defined poly(St)-b-poly(BOSt) multiblock copolymers. Structural confirmation of the multiblock copolymers was accomplished by NMR and IR measurements. The model reaction also supported that the monomer insertion into the macroinitiator proceeded in accordance with a living fashion.     

Synthesis and characterization of aromatic copolyesters containing siloxane linkages in the polymer backbone

A new series of aromatic copolyesters containing siloxane linkages were prepared by the melt polymerization of bisphenol A (BPA) with eugenol end‐capped siloxane (EuSi), diphenyl terephthalate (DPT), and diphenyl isophthalate (DPI) in varying ratio in the temperature range 220–290°C under reduced pressure in the presence of dibutyl tin dilaurate (DBTL) catalyst. The siloxane copolyesters prepared were characterized by FTIR, ¹H‐NMR spectroscopy, solution viscosity, thermogravimetric analysis, differential scanning calorimetry, and X‐ray diffraction. The effect of incorporation of eugenol end‐capped siloxane was studied on the properties of BPA/DPI/DPT copolyesters. The glass‐transition temperature of copolyester was decreased from 184 to 70°C by incorporation of 20% of eugenol end‐capped siloxane. All copolyesters were found to be soluble in commonly used aprotic polar solvents and had film‐forming properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3222–3228, 2006     

神经网络在聚合过程中的应用

介绍了神经网络在聚合反应过程中的建模，预测、优化，控制和故障诊断及模式识别方面的应用，讨论了其优点和局限性，并分析今后神经网络的发展趋势。     

气相法聚乙烯BCG-Ⅱ型催化剂的开发和应用

对气相法聚乙烯BCG-Ⅱ型催化剂的组成、粒径分布及催化剂的淤浆聚合性能进行了研究。研究结果表明，BCG—Ⅱ型催化剂的活性较高，聚合物堆密度适中，应用在Unipol乙烯气相聚合工艺装置上操作良好，所生产的树脂颗粒均匀。干爽且流动性好，产品质量合格、稳定。     

新型氯乙烯非均相聚合动力学和成粒机理

对以正丁烷（But)为反应介质的新型氯乙烯（VC）非均相聚合动力学和成粒机理进行了研究，根据VC-But二元体系气液平衡方程，由聚合过程气相压力或组成变化计算VC聚合转化率，VC非均相聚合的诱导期不明显，自动加速现象一般发生在聚合前、中期，后期聚合速率较小，新型VC非均相聚合PVC树脂的体粒径与悬浮PVC树脂相当，数均粒径较小，PVC颗粒由基本不熔结的初级粒子组成，颗粒内部初级粒子分布密度大，粒径大，孔隙率高；而在颗粒表层初级粒子分布密度高，粒径小，孔隙率低；树脂的增塑剂吸收率远大于悬浮PVC树脂，根据PVC树脂的颗粒特性和PVC与VC／But混合液的溶解度参数差异，推断聚合成粒机理为：PVC分子链在很低转化率时就从聚合介质中沉析出来并聚集形成微区，初级粒子和颗粒；后期成粒过程包括颗粒内部初级粒子的增长和向表层的离心聚集，颗粒对新形成的大分子链及其初级聚集体的捕捉等。     

双金属氰化物催化剂的研究进展

综述了近年来双金属氰化物（DMC）催化剂的研究进展，指出DMC催化剂是一类用于环氧化物的高效催化剂，与传统的环氧化物催化剂相比，其制得的聚醚多元醇具有分子量高、不饱和度低、分子量分布窄、平均官能度高等优点。但该催化剂在应用过程中仍存在一些缺点。针对这些缺点，国内外的高校、企业已进行了大量的改性研究工作。     

Kinetic study of radical polymerization. II. Solid‐state bulk polymerization of sodium methacrylate by differential scanning calorimetry

The solid‐state radical polymerization of sodium methacrylate was investigated. It was initiated by azobisisobutyronitrile, which was used as a radical initiator. Differential scanning calorimetry (DSC) was used to observe the endothermic and exothermic transitions during the polymerization reaction. Structural studies were performed with the DSC thermograms and Fourier transform infrared and ultraviolet–visible spectra, and all of the results confirmed the progress of the reaction. The obtained data revealed that the polymerization reaction proceeded completely with a 100% conversion. ΔH of this reaction was calculated with various amounts of the initiator, and the peak temperatures were determined at different heating rates. The activation energy (19.7 kcal mol^?1) was also obtained by the Kissinger method for this type of solid polymerization reaction. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1648–1654, 2003